This attribute specifies the number of Logical Connections (LC)
preestablished between each DcmeLink associated with this Dcme
and its remote peer, that are established beyond those that are
required to carry established connections. Those are the standby
LCs to be used for the subsequent user speech or audio 3.1 kHz
calls. This attribute should be set to the number of speech and audio
3.1 kHz calls expected in a typical burst of calls received from the
ISC on one DcmeLink.
Parsed from file nortelPP-dcmeV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-DcmeMIB
This attribute specifies the number of Logical Connections (LC)
preestablished between each DcmeLink associated with this Dcme
and its remote peer, that are established beyond those that are
required to carry established connections. Those are the standby
LCs to be used for the subsequent user speech or audio 3.1 kHz
calls. This attribute should be set to the number of speech and audio
3.1 kHz calls expected in a typical burst of calls received from the
ISC on one DcmeLink.
Parsed from file Nortel-Magellan-Passport-DcmeMIB.mib
Module: Nortel-Magellan-Passport-DcmeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-DcmeMIB
[Automatically extracted from oidview.com]
dcmePreestablishedConnections OBJECT-TYPE SYNTAX Unsigned32 (1..30) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the number of Logical Connections (LC) preestablished between each DcmeLink associated with this Dcme and its remote peer, that are established beyond those that are required to carry established connections. Those are the standby LCs to be used for the subsequent user speech or audio 3.1 kHz calls. This attribute should be set to the number of speech and audio 3.1 kHz calls expected in a typical burst of calls received from the ISC on one DcmeLink." DEFVAL { 5 } ::= { dcmeProvEntry 2 }
dcmePreestablishedConnections OBJECT-TYPE SYNTAX Unsigned32 (1..30) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the number of Logical Connections (LC) preestablished between each DcmeLink associated with this Dcme and its remote peer, that are established beyond those that are required to carry established connections. Those are the standby LCs to be used for the subsequent user speech or audio 3.1 kHz calls. This attribute should be set to the number of speech and audio 3.1 kHz calls expected in a typical burst of calls received from the ISC on one DcmeLink." DEFVAL { 5 } ::= { dcmeProvEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.129.10.1.1 | dcmeCommentText | 0 | 0 | Use of this attribute is at the discretion of the system administrator. Typically, it specifies the name of the customer that is… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.3 | dcmeTrmThreshold | 0 | 0 | This attribute is used to determine when the DcmeLink may be unable to handle incoming calls from the ISC. If the Dcme fails to r… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.4 | dcmeTrmSignalChangeInterval | 0 | 0 | This attribute specifies a minimum time interval between TRM signal change from 'No trunk(s) available for 3.1 kHz audio or speec… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.5 | dcmeSpeechAlarmThreshold | 0 | 0 | This attribute specifies how many normal speech calls can be rejected by one dcmeLink within the alarmTimeInterval time before a … |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.6 | dcmeAudio3kHzAlarmThreshold | 0 | 0 | This attribute specifies how many audio 3.1 kHz calls can be rejected by one dcmeLink within the alarmTimeInterval time before a … |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.7 | dcmeUnrestricted64kAlarmThreshold | 0 | 0 | This attribute specifies how many unrestricted 64 kbit/s calls can be rejected by one dcmeLink within the alarmTimeInterval time… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.8 | dcmeAlarmTimeInterval | 0 | 0 | This attribute specifies the time interval within which the rejected speech calls, audio 3.1 kHz calls, and unrestricted 64 kbit… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.9 | dcmeMaxUnrestricted64kCalls | 0 | 0 | This attribute specifies the maximum number of simultaneous dynamic unrestricted 64 kbit/s calls that can be established. A valu… |