This attribute specifies whether the application can tolerate
momentary interruption of a path while a new path is selected. If
pathFailureAction is disconnectConnection, the application is
informed as soon as possible about a failure by disconnection. If
pathFailureAction is reRoutePath, the path may attempt an
immediate reroute, provided the failure is a recoverable failure. If
rerouting fails, the application is informed of the failure.
If pathFailureAction is reRoutePath, the LCo may wait up to 30
seconds before informing the service of complete disconnection in
order to allow both ends to attempt to reconnect. Note that if PLC
components are different at both ends only the calling end is
allowed to reconnect.
All pathTypes respect this attribute. Also on a manualPath with
both ends provisioned with independent paths (at least with respect
to the failure) this option has the desired effect that the path is
rerouted without complete disconnection at both ends.
Parsed from file nortelPP-dcmeV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-DcmeMIB
This attribute specifies whether the application can tolerate
momentary interruption of a path while a new path is selected. If
pathFailureAction is disconnectConnection, the application is
informed as soon as possible about a failure by disconnection. If
pathFailureAction is reRoutePath, the path may attempt an
immediate reroute, provided the failure is a recoverable failure. If
rerouting fails, the application is informed of the failure.
If pathFailureAction is reRoutePath, the LCo may wait up to 30
seconds before informing the service of complete disconnection in
order to allow both ends to attempt to reconnect. Note that if PLC
components are different at both ends only the calling end is
allowed to reconnect.
All pathTypes respect this attribute. Also on a manualPath with
both ends provisioned with independent paths (at least with respect
to the failure) this option has the desired effect that the path is
rerouted without complete disconnection at both ends.
Parsed from file Nortel-Magellan-Passport-DcmeMIB.mib
Module: Nortel-Magellan-Passport-DcmeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-DcmeMIB
[Automatically extracted from oidview.com]
dcmeProfilePathFailureAction OBJECT-TYPE SYNTAX INTEGER { disconnectConnection(0), reRoutePath(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the application can tolerate momentary interruption of a path while a new path is selected. If pathFailureAction is disconnectConnection, the application is informed as soon as possible about a failure by disconnection. If pathFailureAction is reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails, the application is informed of the failure. If pathFailureAction is reRoutePath, the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. Note that if PLC components are different at both ends only the calling end is allowed to reconnect. All pathTypes respect this attribute. Also on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option has the desired effect that the path is rerouted without complete disconnection at both ends." DEFVAL { reRoutePath } ::= { dcmeProfileLCOpsEntry 13 }
dcmeProfilePathFailureAction OBJECT-TYPE SYNTAX INTEGER { disconnectConnection(0), reRoutePath(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the application can tolerate momentary interruption of a path while a new path is selected. If pathFailureAction is disconnectConnection, the application is informed as soon as possible about a failure by disconnection. If pathFailureAction is reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails, the application is informed of the failure. If pathFailureAction is reRoutePath, the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. Note that if PLC components are different at both ends only the calling end is allowed to reconnect. All pathTypes respect this attribute. Also on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option has the desired effect that the path is rerouted without complete disconnection at both ends." DEFVAL { reRoutePath } ::= { dcmeProfileLCOpsEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.1 | dcmeProfileSetupPriority | 0 | 0 | This attribute specifies the priority at which a path is established. Zero is the highest priority and four is the lowest. When … |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.2 | dcmeProfileHoldingPriority | 0 | 0 | This attribute specifies the priority that a path holds once it is established. Zero is the highest priority and four is the low… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.3 | dcmeProfileBumpPreference | 0 | 0 | This attribute specifies when bumping occurs in the route selection process. A connection with higher (numerically less) setupPr… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.4 | dcmeProfileRequiredTrafficType | 0 | 0 | This attribute specifies the type of traffic transmitted over the path. There are eight possible traffic types, and the path can… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.5 | dcmeProfilePermittedTrunkTypes | 0 | 0 | This attribute specifies up to eight types of trunks that can be used on the route. The terrestrial and satellite trunk types ar… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.6 | dcmeProfileRequiredSecurity | 0 | 0 | This attribute specifies the required minimum level of security of the trunks on the route. Zero represents the most secure and … |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.7 | dcmeProfileRequiredCustomerParm | 0 | 0 | This attribute specifies the allowed customer defined parameter of the trunks on the route. The value of requiredCustomerParm ra… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.8 | dcmeProfilePathAttributeToMinimize | 0 | 0 | This attribute specifies whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.9 | dcmeProfileMaximumAcceptableCost | 0 | 0 | This attribute specifies an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.10 | dcmeProfileMaximumAcceptableDelay | 0 | 0 | This attribute specifies an upper bound on the delay of a route, which is the sum of the delays of all trunks on the route. It s… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.11 | dcmeProfileEmissionPriority | 0 | 0 | This attribute specifies the urgency with which packets on the path are emitted by the trunks on the route. An emissionPriority … |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.12 | dcmeProfileDiscardPriority | 0 | 0 | This attribute specifies the importance of the packets on the path. A discardPriority of 1 is used for paths carrying the most i… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.14 | dcmeProfileOptimization | 0 | 0 | This attribute specifies whether this connection should attempt to optimize its path when requested by the Rtg Pors component. E… |