This attribute indicates the results of negotiating audio call
encodings for voice, modemFax and fax traffic with the remote end
across the subnet. The parameters used for negotiating with the
remote end are provisioned in Vncs Vp voiceEncodingChoice and
Vncs Vp modemFaxEncodingChoice.
voice traffic is all traffic from the start of a call or speech until a
2100 Hz tone or call release. modemFax traffic is all traffic after a
2100 Hz tone but before a fax preamble, speech or call release. fax
traffic is all traffic after a fax preamble but before speech or call
release.
g711 indicates that pulse code modulation (PCM) defined by ITU-T
G.711 is the negotiated encoding.
g726 indicates that Adaptive Differential Pulse Code Modulation
(ADPCM) defined by ITU-T G.726 is the negotiated encoding.
g711G726 indicates that pulse code modulation (PCM) defined by
ITU-T G.711 and Adaptive Differential Pulse Code Modulation
(ADPCM) defined by ITU-T G.726 are both negotiated encodings.
If negotiatedEncoding is g711G726, the actual encoding performed
can be either G.711 or G.726, depending on network congestion.
g728 indicates that Low Delay Coded Excited Linear Predictive
Coder (CS-ACELP) defined by ITU-T G.728 is the negotiated
encoding.
g729 indicates that Conjunctive Structure Algebraic Code Excited
Linear Predictive Coder (CS-ACELP) defined by ITU-T G.729 is
the negotiated encoding.
v29V27Relay indicates that fax relay using ITU-T V.27 or ITU-T
V.29 is the negotiated encoding.
v17V29V27Relay indicates that fax relay using ITU-T V.17, ITU-T
V.27, or ITU-T V.29 is the negotiated encoding.
If all negotiated encodings are none, the negotiation of audio call
encodings is not complete.
Parsed from file nortelPP-dcmeV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-DcmeMIB
This attribute indicates the results of negotiating audio call
encodings for voice, modemFax and fax traffic with the remote end
across the subnet. The parameters used for negotiating with the
remote end are provisioned in Vncs Vp voiceEncodingChoice and
Vncs Vp modemFaxEncodingChoice.
voice traffic is all traffic from the start of a call or speech until a
2100 Hz tone or call release. modemFax traffic is all traffic after a
2100 Hz tone but before a fax preamble, speech or call release. fax
traffic is all traffic after a fax preamble but before speech or call
release.
g711 indicates that pulse code modulation (PCM) defined by ITU-T
G.711 is the negotiated encoding.
g726 indicates that Adaptive Differential Pulse Code Modulation
(ADPCM) defined by ITU-T G.726 is the negotiated encoding.
g711G726 indicates that pulse code modulation (PCM) defined by
ITU-T G.711 and Adaptive Differential Pulse Code Modulation
(ADPCM) defined by ITU-T G.726 are both negotiated encodings.
If negotiatedEncoding is g711G726, the actual encoding performed
can be either G.711 or G.726, depending on network congestion.
g728 indicates that Low Delay Coded Excited Linear Predictive
Coder (CS-ACELP) defined by ITU-T G.728 is the negotiated
encoding.
g729 indicates that Conjunctive Structure Algebraic Code Excited
Linear Predictive Coder (CS-ACELP) defined by ITU-T G.729 is
the negotiated encoding.
v29V27Relay indicates that fax relay using ITU-T V.27 or ITU-T
V.29 is the negotiated encoding.
v17V29V27Relay indicates that fax relay using ITU-T V.17, ITU-T
V.27, or ITU-T V.29 is the negotiated encoding.
If all negotiated encodings are none, the negotiation of audio call
encodings is not complete.
Parsed from file Nortel-Magellan-Passport-DcmeMIB.mib
Module: Nortel-Magellan-Passport-DcmeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-DcmeMIB
[Automatically extracted from oidview.com]
dclVsFramerNEncodingTable OBJECT-TYPE SYNTAX SEQUENCE OF DclVsFramerNEncodingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute indicates the results of negotiating audio call encodings for voice, modemFax and fax traffic with the remote end across the subnet. The parameters used for negotiating with the remote end are provisioned in Vncs Vp voiceEncodingChoice and Vncs Vp modemFaxEncodingChoice. voice traffic is all traffic from the start of a call or speech until a 2100 Hz tone or call release. modemFax traffic is all traffic after a 2100 Hz tone but before a fax preamble, speech or call release. fax traffic is all traffic after a fax preamble but before speech or call release. g711 indicates that pulse code modulation (PCM) defined by ITU-T G.711 is the negotiated encoding. g726 indicates that Adaptive Differential Pulse Code Modulation (ADPCM) defined by ITU-T G.726 is the negotiated encoding. g711G726 indicates that pulse code modulation (PCM) defined by ITU-T G.711 and Adaptive Differential Pulse Code Modulation (ADPCM) defined by ITU-T G.726 are both negotiated encodings. If negotiatedEncoding is g711G726, the actual encoding performed can be either G.711 or G.726, depending on network congestion. g728 indicates that Low Delay Coded Excited Linear Predictive Coder (CS-ACELP) defined by ITU-T G.728 is the negotiated encoding. g729 indicates that Conjunctive Structure Algebraic Code Excited Linear Predictive Coder (CS-ACELP) defined by ITU-T G.729 is the negotiated encoding. v29V27Relay indicates that fax relay using ITU-T V.27 or ITU-T V.29 is the negotiated encoding. v17V29V27Relay indicates that fax relay using ITU-T V.17, ITU-T V.27, or ITU-T V.29 is the negotiated encoding. If all negotiated encodings are none, the negotiation of audio call encodings is not complete." ::= { dclVsFramer 467 }
dclVsFramerNEncodingTable OBJECT-TYPE SYNTAX SEQUENCE OF DclVsFramerNEncodingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute indicates the results of negotiating audio call encodings for voice, modemFax and fax traffic with the remote end across the subnet. The parameters used for negotiating with the remote end are provisioned in Vncs Vp voiceEncodingChoice and Vncs Vp modemFaxEncodingChoice. voice traffic is all traffic from the start of a call or speech until a 2100 Hz tone or call release. modemFax traffic is all traffic after a 2100 Hz tone but before a fax preamble, speech or call release. fax traffic is all traffic after a fax preamble but before speech or call release. g711 indicates that pulse code modulation (PCM) defined by ITU-T G.711 is the negotiated encoding. g726 indicates that Adaptive Differential Pulse Code Modulation (ADPCM) defined by ITU-T G.726 is the negotiated encoding. g711G726 indicates that pulse code modulation (PCM) defined by ITU-T G.711 and Adaptive Differential Pulse Code Modulation (ADPCM) defined by ITU-T G.726 are both negotiated encodings. If negotiatedEncoding is g711G726, the actual encoding performed can be either G.711 or G.726, depending on network congestion. g728 indicates that Low Delay Coded Excited Linear Predictive Coder (CS-ACELP) defined by ITU-T G.728 is the negotiated encoding. g729 indicates that Conjunctive Structure Algebraic Code Excited Linear Predictive Coder (CS-ACELP) defined by ITU-T G.729 is the negotiated encoding. v29V27Relay indicates that fax relay using ITU-T V.27 or ITU-T V.29 is the negotiated encoding. v17V29V27Relay indicates that fax relay using ITU-T V.17, ITU-T V.27, or ITU-T V.29 is the negotiated encoding. If all negotiated encodings are none, the negotiation of audio call encodings is not complete." ::= { dclVsFramer 467 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.130.4.2.467.1 | dclVsFramerNEncodingEntry | 2 | 2 | An entry in the dclVsFramerNEncodingTable. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.130.4.2.1 | dclVsFramerRowStatusTable | 1 | 5 | This entry controls the addition and deletion of dclVsFramer components. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.5 | dclVsFramerVfpDebug | 1 | 6 | None |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.6 | dclVsFramerMvpDebug | 1 | 6 | None |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.7 | dclVsFramerPcmCapture | 1 | 6 | None |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.10 | dclVsFramerProvTable | 1 | 2 | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.14 | dclVsFramerStateTable | 1 | 4 | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies abou… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15 | dclVsFramerStatsTable | 1 | 16 | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.16 | dclVsFramerOperTable | 1 | 4 | This group contains the operational data for a Svs Framer. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.17 | dclVsFramerNegTable | 1 | 6 | This group contains the attributes indicating the results of voice networking end to end negotiation. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.315 | dclVsFramerFrmToNetworkTable | 1 | 3 | This attribute counts the number of frames sent to the network at each encoding rate. Fax relay cells are not included. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.316 | dclVsFramerFrmFromNetworkTable | 1 | 3 | This attribute counts the number of frames received from the network at each encoding rate. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.479 | dclVsFramerNRatesTable | 1 | 4 | This attribute indicates the results of negotiating minimum and maximum rates for voice, modemFax and fax traffic with the remote… |