This attribute indicates the current 'transmittable' bandwidth of the
underlying facility.
For a Trunk with a Unack subcomponent, and a DpnGateway with a
Utp subcomponent, if a serial port is used, the value is the measured
transmit speed of the port; if a channelized port (E1/DS1) is used,
the value is the measured transmit speed of the Channel.
For a Trunk with an AtmAccess subcomponent, the value is
calculated by converting the VCC transmit cell rate to an equivalent
bit rate. The VCC transmit cell rate is determined based on the
vccReportingBw attribute of the Trunk AtmAccess component. If
vccReportingBw has a value of pcr and attribute bwElastic of
AtmAccess has a value of no, the peak cell rate (PCR) of the VCC,
defined in txTrafficDescParm of AtmIf Vcc Vcd, is used. If
vccReportingBw has a value of pcr and attribute bwElastic of
AtmAccess has a value of yes, the minimum of the PCR, defined in
txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate
(CCR) of the VCC is used. If vccReportingBw has a value of acr,
the best measurement of the actual cell rate (ACR) of the VCC is
used, which is the minimum of the PCR, the CCR and the actual
shaping rate (ASR).
For a DpnGateway with a FrAccess subcomponent, the value
indicates the committedInformationRate of FrAccess FrMuxSetup.
A value of zero is displayed when the underlying facility is disabled
or the current 'transmittable' bandwidth is unknown.
Parsed from file nortelPP-dpnTrunksV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-DpnTrunksMIB
This attribute indicates the current 'transmittable' bandwidth of the
underlying facility.
For a Trunk with a Unack subcomponent, and a DpnGateway with a
Utp subcomponent, if a serial port is used, the value is the measured
transmit speed of the port; if a channelized port (E1/DS1) is used,
the value is the measured transmit speed of the Channel.
For a Trunk with an AtmAccess subcomponent, the value is
calculated by converting the VCC transmit cell rate to an equivalent
bit rate. The VCC transmit cell rate is determined based on the
vccReportingBw attribute of the Trunk AtmAccess component. If
vccReportingBw has a value of pcr and attribute bwElastic of
AtmAccess has a value of no, the peak cell rate (PCR) of the VCC,
defined in txTrafficDescParm of AtmIf Vcc Vcd, is used. If
vccReportingBw has a value of pcr and attribute bwElastic of
AtmAccess has a value of yes, the minimum of the PCR, defined in
txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate
(CCR) of the VCC is used. If vccReportingBw has a value of acr,
the best measurement of the actual cell rate (ACR) of the VCC is
used, which is the minimum of the PCR, the CCR and the actual
shaping rate (ASR).
For a DpnGateway with a FrAccess subcomponent, the value
indicates the committedInformationRate of FrAccess FrMuxSetup.
A value of zero is displayed when the underlying facility is disabled
or the current 'transmittable' bandwidth is unknown.
Parsed from file Nortel-Magellan-Passport-DpnTrunksMIB.mib
Module: Nortel-Magellan-Passport-DpnTrunksMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-DpnTrunksMIB
[Automatically extracted from oidview.com]
dpnGateMeasuredSpeedToIf OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current 'transmittable' bandwidth of the underlying facility. For a Trunk with a Unack subcomponent, and a DpnGateway with a Utp subcomponent, if a serial port is used, the value is the measured transmit speed of the port; if a channelized port (E1/DS1) is used, the value is the measured transmit speed of the Channel. For a Trunk with an AtmAccess subcomponent, the value is calculated by converting the VCC transmit cell rate to an equivalent bit rate. The VCC transmit cell rate is determined based on the vccReportingBw attribute of the Trunk AtmAccess component. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of no, the peak cell rate (PCR) of the VCC, defined in txTrafficDescParm of AtmIf Vcc Vcd, is used. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of yes, the minimum of the PCR, defined in txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate (CCR) of the VCC is used. If vccReportingBw has a value of acr, the best measurement of the actual cell rate (ACR) of the VCC is used, which is the minimum of the PCR, the CCR and the actual shaping rate (ASR). For a DpnGateway with a FrAccess subcomponent, the value indicates the committedInformationRate of FrAccess FrMuxSetup. A value of zero is displayed when the underlying facility is disabled or the current 'transmittable' bandwidth is unknown." DEFVAL { 0 } ::= { dpnGateTransportEntry 1 }
dpnGateMeasuredSpeedToIf OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current 'transmittable' bandwidth of the underlying facility. For a Trunk with a Unack subcomponent, and a DpnGateway with a Utp subcomponent, if a serial port is used, the value is the measured transmit speed of the port; if a channelized port (E1/DS1) is used, the value is the measured transmit speed of the Channel. For a Trunk with an AtmAccess subcomponent, the value is calculated by converting the VCC transmit cell rate to an equivalent bit rate. The VCC transmit cell rate is determined based on the vccReportingBw attribute of the Trunk AtmAccess component. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of no, the peak cell rate (PCR) of the VCC, defined in txTrafficDescParm of AtmIf Vcc Vcd, is used. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of yes, the minimum of the PCR, defined in txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate (CCR) of the VCC is used. If vccReportingBw has a value of acr, the best measurement of the actual cell rate (ACR) of the VCC is used, which is the minimum of the PCR, the CCR and the actual shaping rate (ASR). For a DpnGateway with a FrAccess subcomponent, the value indicates the committedInformationRate of FrAccess FrMuxSetup. A value of zero is displayed when the underlying facility is disabled or the current 'transmittable' bandwidth is unknown." DEFVAL { 0 } ::= { dpnGateTransportEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.61.106.1.2 | dpnGateMeasuredRoundTripDelay | 0 | 0 | This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging… |
| 1.3.6.1.4.1.562.2.4.1.61.106.1.3 | dpnGateMaxTxUnit | 0 | 0 | This is the maximum transmission unit (byte size) that is supported by the Trunk or DpnGateway component. This size includes the… |
| 1.3.6.1.4.1.562.2.4.1.61.106.1.4 | dpnGateMeasuredRoundTripDelayUsec | 0 | 0 | This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging… |