This attribute specifies whether the Frame Relay LMI Active Bit
(A-bit) has a bearing on the transfer of user data across this Frame
Relay interface for both directions of traffic flow.
When this attribute is set to yes, the A-bit status of a user DLCI
connection does not affect data transfer.
When this attribute is set to no, data received from the local
interface is discarded if an A-bit =0 condition exists towards the
local user. Data being sent to the local interface is discarded if an A-
bit = 0 condition exists towards the local user.
Parsed from file nortelPP-frameRelayNniV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-FrameRelayNniMIB
This attribute specifies whether the Frame Relay LMI Active Bit
(A-bit) has a bearing on the transfer of user data across this Frame
Relay interface for both directions of traffic flow.
When this attribute is set to yes, the A-bit status of a user DLCI
connection does not affect data transfer.
When this attribute is set to no, data received from the local
interface is discarded if an A-bit =0 condition exists towards the
local user. Data being sent to the local interface is discarded if an A-
bit = 0 condition exists towards the local user.
Parsed from file Nortel-Magellan-Passport-FrameRelayNniMIB.mib
Module: Nortel-Magellan-Passport-FrameRelayNniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-FrameRelayNniMIB
[Automatically extracted from oidview.com]
frNniLmiIgnoreActiveBit OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the Frame Relay LMI Active Bit (A-bit) has a bearing on the transfer of user data across this Frame Relay interface for both directions of traffic flow. When this attribute is set to yes, the A-bit status of a user DLCI connection does not affect data transfer. When this attribute is set to no, data received from the local interface is discarded if an A-bit =0 condition exists towards the local user. Data being sent to the local interface is discarded if an A- bit = 0 condition exists towards the local user." DEFVAL { no } ::= { frNniLmiParmsEntry 7 }
frNniLmiIgnoreActiveBit OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the Frame Relay LMI Active Bit (A-bit) has a bearing on the transfer of user data across this Frame Relay interface for both directions of traffic flow. When this attribute is set to yes, the A-bit status of a user DLCI connection does not affect data transfer. When this attribute is set to no, data received from the local interface is discarded if an A-bit =0 condition exists towards the local user. Data being sent to the local interface is discarded if an A- bit = 0 condition exists towards the local user." DEFVAL { no } ::= { frNniLmiParmsEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.1 | frNniLmiProcedures | 0 | 0 | This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures:… |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.2 | frNniLmiAsyncStatusReport | 0 | 0 | This attribute selects the use of asynchronous PVC status report procedures as specified in ANSI and CCITT specification. |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.3 | frNniLmiErrorEventThreshold | 0 | 0 | For the network-side-procedure, an event is defined as follows: (1) receipt of a STATUS ENQUIRY message, or (2) expiration of ti… |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.4 | frNniLmiEventCount | 0 | 0 | This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed.… |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.5 | frNniLmiCheckPointTimer | 0 | 0 | This attribute selects the time (in seconds) within which a STATUS ENQUIRY message is expected. It must be greater than linkVerif… |