The alarm type field as defined by OSI which is used
to indicate a broad category of what is wrong. The
first 6 values are OSI-defined; refer to CCITT X.733/ISO
10164-4 (for the first 5) and CCITT X.736/ISO 10164-4
(for the last) for a more complete description. The
value 'operator' is used when an alarm is issued due
to an operator command. The values 'debug' and 'unknown'
are for compatibility with older switches and are used
for debugging alarms and for those which do not fit
any of the above, respectively.
Parsed from file Rel4_0-Signaling-Server-trap.mib.txt
Company: avaya
Module: SS-TRAP-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
alarmType OBJECT-TYPE SYNTAX AlarmType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The alarm type field as defined by OSI which is used to indicate a broad category of what is wrong. The first 6 values are OSI-defined; refer to CCITT X.733/ISO 10164-4 (for the first 5) and CCITT X.736/ISO 10164-4 (for the last) for a more complete description. The value 'operator' is used when an alarm is issued due to an operator command. The values 'debug' and 'unknown' are for compatibility with older switches and are used for debugging alarms and for those which do not fit any of the above, respectively." ::= { fmSSAlarmInfo 6}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.3.21.5.4.1.7.6.0 | alarmType | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.3.21.5.4.1.7.1 | componentRowPointer | 1 | 1 | A pointer to the RowStatus variable of the component emitting the alarm, on a system where a component is generally a table entry. |
| 1.3.6.1.4.1.562.3.21.5.4.1.7.2 | componentName | 1 | 1 | This convention is used where each component can be uniquely referenced by a type and instance name (at the console interface als… |
| 1.3.6.1.4.1.562.3.21.5.4.1.7.3 | eventTime | 1 | 1 | The date and time at which the alarmed event occurred. |
| 1.3.6.1.4.1.562.3.21.5.4.1.7.4 | activeListStatus | 1 | 1 | The active alarm list status. This may be used by the Manager to add (on receiving a set) and delete (on receiving a clear) alarm… |
| 1.3.6.1.4.1.562.3.21.5.4.1.7.5 | severity | 1 | 1 | The severity of the alarm which should indicate what priority should be given for fixing this problem. All values are OSI-defined… |
| 1.3.6.1.4.1.562.3.21.5.4.1.7.7 | probableCause | 1 | 1 | The probable cause for the alarm which usually qualifies the Alarm Type field. Most values are OSI-defined; refer to CCITT X.733 … |
| 1.3.6.1.4.1.562.3.21.5.4.1.7.8 | ntpIndex | 1 | 1 | An 8-digit code which is an index into an NTP to provide more description of the alarm and possible actions to take. The first 4 … |
| 1.3.6.1.4.1.562.3.21.5.4.1.7.9 | commentData | 1 | 1 | Additional textual information for the network operator to use. It contains only ASCII characters. Note: The total number of byte… |