This attribute selects the procedures to be used for the Local
Management Interface. The following are the supported procedures:
none : No Local Management Interface procedure is active.
vendorForum : Local Management Interface procedure according to
the Vendor Forum specification is active. DLCI 1023 is used for the
LMI protocol.
ansi: Local Management Interface procedure according to the
ANSI specification is active. DLCI 0 is used for the LMI protocol.
ccitt: Local Management Interface procedure according to the
CCITT specification is active. DLCI 0 is used for the LMI protocol.
Parsed from file nortelPC-frameRelayMuxV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB
This attribute selects the procedures to be used for the Local
Management Interface. The following are the supported procedures:
none : No Local Management Interface procedure is active.
vendorForum : Local Management Interface procedure according to
the Vendor Forum specification is active. DLCI 1023 is used for the
LMI protocol.
ansi: Local Management Interface procedure according to the
ANSI specification is active. DLCI 0 is used for the LMI protocol.
ccitt: Local Management Interface procedure according to the
CCITT specification is active. DLCI 0 is used for the LMI protocol.
Parsed from file Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB.mib
Module: Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB
[Automatically extracted from oidview.com]
mscFrMuxLmiProcedures OBJECT-TYPE SYNTAX INTEGER { none(0), vendorForum(1), ansi(2), ccitt(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none : No Local Management Interface procedure is active. vendorForum : Local Management Interface procedure according to the Vendor Forum specification is active. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedure according to the ANSI specification is active. DLCI 0 is used for the LMI protocol. ccitt: Local Management Interface procedure according to the CCITT specification is active. DLCI 0 is used for the LMI protocol." DEFVAL { ccitt } ::= { mscFrMuxLmiProvEntry 1 }
mscFrMuxLmiProcedures OBJECT-TYPE SYNTAX INTEGER { none(0), vendorForum(1), ansi(2), ccitt(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none : No Local Management Interface procedure is active. vendorForum : Local Management Interface procedure according to the Vendor Forum specification is active. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedure according to the ANSI specification is active. DLCI 0 is used for the LMI protocol. ccitt: Local Management Interface procedure according to the CCITT specification is active. DLCI 0 is used for the LMI protocol." DEFVAL { ccitt } ::= { mscFrMuxLmiProvEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.112.3.10.1.2 | mscFrMuxLmiLinkVerificationTimer | 0 | 0 | This attribute specifies the time interval (in seconds) at which the FrMux sends Status Enquiry messages to the interface. Excha… |
1.3.6.1.4.1.562.36.2.1.112.3.10.1.3 | mscFrMuxLmiFullStatusPollingCycles | 0 | 0 | This attribute specifies every which polling cycle the FrMux sends a full STATUS ENQUIRY to the interface. Every fullStatusPollin… |
1.3.6.1.4.1.562.36.2.1.112.3.10.1.4 | mscFrMuxLmiErrorEventThreshold | 0 | 0 | This attribute specifies the number of error events which, if they occur within eventCount events, will cause a protocol error co… |
1.3.6.1.4.1.562.36.2.1.112.3.10.1.5 | mscFrMuxLmiEventCount | 0 | 0 | This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed.… |