This group contains provisionable attributes which specify the VCC
space to be supported by this ATM interface. The VCC space
consists of an optional 'VPI Zero VCC Space' and an optional
'Programmable VCC Space'. If not specified otherwise, the
semantic checks described below are applicable only for the CQC-
based cards.
The VPI Zero VCC Space is used to support VCCs with a VPI of
zero. The VCI values supported in this space range from 0 to a
provisioned maximum. The size of the VPI Zero VCC Space must
either be 0 or a multiple of 256. A value of 0 implies that no
programmable VCCs can be used. In this case
numNonZeroVpisForVccs must also be 0.
The optional Programmable VCC Space is used to support VCCs
with a VPI other than zero. The VPI values supported in this space
must lie in a single contiguous range which excludes VPI 0. The
VCI values supported in this space range from 0 to a provisioned
maximum. The size of the Programmable VCC Space (should it
exist) must adhere to the following rules:
If (firstNonZeroVpiForVccs = 1) THEN
(numNonZeroVpisForVccs + 1) * numVccsPerNonZeroVpi
must be a multiple of 256
OTHERWISE
numNonZeroVpisForVccs * numVccsPerNonZeroVpi
must be a multiple of 256
The number of connection identifier resources in the VCC and VPC
space can be determined as follows:
The number of connection identifier resources in the VCC and VPC
space (not all of which are available for user connections) is
reported in the Lp/n Eng Arc totalConnectionPoolAvailable
attribute, and can be determined as follows:
IF (numNonZeroVpisForVccs = 0) THEN
number of connection ID resources =
256 + numVccsForVpiZero
OTHERWISE IF (firstNonZeroVpiForVccs = 1) THEN
number of connection ID resources =
256 + numVccsForVpiZero +
(numNonZeroVpisForVccs + 1) * numVccsPerNonZeroVpi
OTHERWISE
number of connection ID resources =
256 + numVccsForVpiZero +
(numNonZeroVpisForVccs * numVccsPerNonZeroVpi)
The number of connection identifier resources must not exceed the
capacity of the port to which the interface is linked. If the Lp has an
Eng Arc Cqc Ov component provisioned with a non-zero
connectionPoolCapacity the port's capacity is specified by this
attribute. Otherwise the port's capacity is indicated by the Lp/n Eng
Arc totalConnectionPoolAvailable divided by the number of
physical ports on the card.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This group contains provisionable attributes which specify the VCC
space to be supported by this ATM interface. The VCC space
consists of an optional 'VPI Zero VCC Space' and an optional
'Programmable VCC Space'. If not specified otherwise, the
semantic checks described below are applicable only for the CQC-
based cards.
The VPI Zero VCC Space is used to support VCCs with a VPI of
zero. The VCI values supported in this space range from 0 to a
provisioned maximum. The size of the VPI Zero VCC Space must
either be 0 or a multiple of 256. A value of 0 implies that no
programmable VCCs can be used. In this case
numNonZeroVpisForVccs must also be 0.
The optional Programmable VCC Space is used to support VCCs
with a VPI other than zero. The VPI values supported in this space
must lie in a single contiguous range which excludes VPI 0. The
VCI values supported in this space range from 0 to a provisioned
maximum. The size of the Programmable VCC Space (should it
exist) must adhere to the following rules:
If (firstNonZeroVpiForVccs = 1) THEN
(numNonZeroVpisForVccs + 1) * numVccsPerNonZeroVpi
must be a multiple of 256
OTHERWISE
numNonZeroVpisForVccs * numVccsPerNonZeroVpi
must be a multiple of 256
The number of connection identifier resources in the VCC and VPC
space can be determined as follows:
The number of connection identifier resources in the VCC and VPC
space (not all of which are available for user connections) is
reported in the Lp/n Eng Arc totalConnectionPoolAvailable
attribute, and can be determined as follows:
IF (numNonZeroVpisForVccs = 0) THEN
number of connection ID resources =
256 + numVccsForVpiZero
OTHERWISE IF (firstNonZeroVpiForVccs = 1) THEN
number of connection ID resources =
256 + numVccsForVpiZero +
(numNonZeroVpisForVccs + 1) * numVccsPerNonZeroVpi
OTHERWISE
number of connection ID resources =
256 + numVccsForVpiZero +
(numNonZeroVpisForVccs * numVccsPerNonZeroVpi)
The number of connection identifier resources must not exceed the
capacity of the port to which the interface is linked. If the Lp has an
Eng Arc Cqc Ov component provisioned with a non-zero
connectionPoolCapacity the port's capacity is specified by this
attribute. Otherwise the port's capacity is indicated by the Lp/n Eng
Arc totalConnectionPoolAvailable divided by the number of
physical ports on the card.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfConnMapOvProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfConnMapOvProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes which specify the VCC space to be supported by this ATM interface. The VCC space consists of an optional 'VPI Zero VCC Space' and an optional 'Programmable VCC Space'. If not specified otherwise, the semantic checks described below are applicable only for the CQC- based cards. The VPI Zero VCC Space is used to support VCCs with a VPI of zero. The VCI values supported in this space range from 0 to a provisioned maximum. The size of the VPI Zero VCC Space must either be 0 or a multiple of 256. A value of 0 implies that no programmable VCCs can be used. In this case numNonZeroVpisForVccs must also be 0. The optional Programmable VCC Space is used to support VCCs with a VPI other than zero. The VPI values supported in this space must lie in a single contiguous range which excludes VPI 0. The VCI values supported in this space range from 0 to a provisioned maximum. The size of the Programmable VCC Space (should it exist) must adhere to the following rules: If (firstNonZeroVpiForVccs = 1) THEN (numNonZeroVpisForVccs + 1) * numVccsPerNonZeroVpi must be a multiple of 256 OTHERWISE numNonZeroVpisForVccs * numVccsPerNonZeroVpi must be a multiple of 256 The number of connection identifier resources in the VCC and VPC space can be determined as follows: The number of connection identifier resources in the VCC and VPC space (not all of which are available for user connections) is reported in the Lp/n Eng Arc totalConnectionPoolAvailable attribute, and can be determined as follows: IF (numNonZeroVpisForVccs = 0) THEN number of connection ID resources = 256 + numVccsForVpiZero OTHERWISE IF (firstNonZeroVpiForVccs = 1) THEN number of connection ID resources = 256 + numVccsForVpiZero + (numNonZeroVpisForVccs + 1) * numVccsPerNonZeroVpi OTHERWISE number of connection ID resources = 256 + numVccsForVpiZero + (numNonZeroVpisForVccs * numVccsPerNonZeroVpi) The number of connection identifier resources must not exceed the capacity of the port to which the interface is linked. If the Lp has an Eng Arc Cqc Ov component provisioned with a non-zero connectionPoolCapacity the port's capacity is specified by this attribute. Otherwise the port's capacity is indicated by the Lp/n Eng Arc totalConnectionPoolAvailable divided by the number of physical ports on the card." ::= { mscAtmIfConnMapOv 100 }
mscAtmIfConnMapOvProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfConnMapOvProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes which specify the VCC space to be supported by this ATM interface. The VCC space consists of an optional 'VPI Zero VCC Space' and an optional 'Programmable VCC Space'. If not specified otherwise, the semantic checks described below are applicable only for the CQC- based cards. The VPI Zero VCC Space is used to support VCCs with a VPI of zero. The VCI values supported in this space range from 0 to a provisioned maximum. The size of the VPI Zero VCC Space must either be 0 or a multiple of 256. A value of 0 implies that no programmable VCCs can be used. In this case numNonZeroVpisForVccs must also be 0. The optional Programmable VCC Space is used to support VCCs with a VPI other than zero. The VPI values supported in this space must lie in a single contiguous range which excludes VPI 0. The VCI values supported in this space range from 0 to a provisioned maximum. The size of the Programmable VCC Space (should it exist) must adhere to the following rules: If (firstNonZeroVpiForVccs = 1) THEN (numNonZeroVpisForVccs + 1) * numVccsPerNonZeroVpi must be a multiple of 256 OTHERWISE numNonZeroVpisForVccs * numVccsPerNonZeroVpi must be a multiple of 256 The number of connection identifier resources in the VCC and VPC space can be determined as follows: The number of connection identifier resources in the VCC and VPC space (not all of which are available for user connections) is reported in the Lp/n Eng Arc totalConnectionPoolAvailable attribute, and can be determined as follows: IF (numNonZeroVpisForVccs = 0) THEN number of connection ID resources = 256 + numVccsForVpiZero OTHERWISE IF (firstNonZeroVpiForVccs = 1) THEN number of connection ID resources = 256 + numVccsForVpiZero + (numNonZeroVpisForVccs + 1) * numVccsPerNonZeroVpi OTHERWISE number of connection ID resources = 256 + numVccsForVpiZero + (numNonZeroVpisForVccs * numVccsPerNonZeroVpi) The number of connection identifier resources must not exceed the capacity of the port to which the interface is linked. If the Lp has an Eng Arc Cqc Ov component provisioned with a non-zero connectionPoolCapacity the port's capacity is specified by this attribute. Otherwise the port's capacity is indicated by the Lp/n Eng Arc totalConnectionPoolAvailable divided by the number of physical ports on the card." ::= { mscAtmIfConnMapOv 100 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.2.120.100.1 | mscAtmIfConnMapOvProvEntry | 4 | 4 | An entry in the mscAtmIfConnMapOvProvTable. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.2.120.1 | mscAtmIfConnMapOvRowStatusTable | 1 | 5 | This entry controls the addition and deletion of mscAtmIfConnMapOv components. |