This attribute is HISTORICAL. Please refer to the attribute of the
same name in the group AtmTmOper.
This attribute indicates the bearer capability for this connection.
Class a service is a connection-oriented, constant bit rate ATM
transport service. Class a service has end to end timing
requirements and may require stringent cell loss, cell delay and cell
delay variation performance.When a is displayed, the user is
requesting more than an ATM only service. The network may look
at the AAL to provide interworking based upon its contents.
Class c service is a connection-oriented, variable bit rate ATM
transport service. Class c service has no end-to-end timing
requirements.When c is displayed, the user is requesting more than
an ATM only service. The network interworking function may look
at the AAL and provide service based on it.
Class x service is a connection-oriented ATM transport service
where the AAL, trafficType (cbr or vbr) and timing requirements
are user defined (that is, transparent to the network). When the
value of this attribute is x, the user is requesting an ATM only
service from the network. In this case, the network shall not process
any higher layer protocol.
Class vp service is used to indicate a transparent VP service when
the user is requesting an ATM only service from the network. In this
case, the network does not process any higher layer protocol. This
service differs from class x service in that with the class vp service
both the VCI field (except for VCI values 0, 3, 4, and 6 through 15)
and Payload Type field are transported transparently by the network.
This attribute value is only applicable to SPVP and SVP
connections.
A value of notApplicable is displayed in the case of nailed-up PVCs
for which this attribute has no significance.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute is HISTORICAL. Please refer to the attribute of the
same name in the group AtmTmOper.
This attribute indicates the bearer capability for this connection.
Class a service is a connection-oriented, constant bit rate ATM
transport service. Class a service has end to end timing
requirements and may require stringent cell loss, cell delay and cell
delay variation performance.When a is displayed, the user is
requesting more than an ATM only service. The network may look
at the AAL to provide interworking based upon its contents.
Class c service is a connection-oriented, variable bit rate ATM
transport service. Class c service has no end-to-end timing
requirements.When c is displayed, the user is requesting more than
an ATM only service. The network interworking function may look
at the AAL and provide service based on it.
Class x service is a connection-oriented ATM transport service
where the AAL, trafficType (cbr or vbr) and timing requirements
are user defined (that is, transparent to the network). When the
value of this attribute is x, the user is requesting an ATM only
service from the network. In this case, the network shall not process
any higher layer protocol.
Class vp service is used to indicate a transparent VP service when
the user is requesting an ATM only service from the network. In this
case, the network does not process any higher layer protocol. This
service differs from class x service in that with the class vp service
both the VCI field (except for VCI values 0, 3, 4, and 6 through 15)
and Payload Type field are transported transparently by the network.
This attribute value is only applicable to SPVP and SVP
connections.
A value of notApplicable is displayed in the case of nailed-up PVCs
for which this attribute has no significance.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVpcBearerClassBbc OBJECT-TYPE SYNTAX INTEGER { a(1), c(3), x(16), vp(24), notApplicable(30) } ACCESS read-only STATUS obsolete DESCRIPTION "This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates the bearer capability for this connection. Class a service is a connection-oriented, constant bit rate ATM transport service. Class a service has end to end timing requirements and may require stringent cell loss, cell delay and cell delay variation performance.When a is displayed, the user is requesting more than an ATM only service. The network may look at the AAL to provide interworking based upon its contents. Class c service is a connection-oriented, variable bit rate ATM transport service. Class c service has no end-to-end timing requirements.When c is displayed, the user is requesting more than an ATM only service. The network interworking function may look at the AAL and provide service based on it. Class x service is a connection-oriented ATM transport service where the AAL, trafficType (cbr or vbr) and timing requirements are user defined (that is, transparent to the network). When the value of this attribute is x, the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol. Class vp service is used to indicate a transparent VP service when the user is requesting an ATM only service from the network. In this case, the network does not process any higher layer protocol. This service differs from class x service in that with the class vp service both the VCI field (except for VCI values 0, 3, 4, and 6 through 15) and Payload Type field are transported transparently by the network. This attribute value is only applicable to SPVP and SVP connections. A value of notApplicable is displayed in the case of nailed-up PVCs for which this attribute has no significance." ::= { mscAtmIfVpcTrafficEntry 71 }
mscAtmIfVpcBearerClassBbc OBJECT-TYPE SYNTAX INTEGER { a(1), c(3), x(16), vp(24), notApplicable(30) } ACCESS read-only STATUS obsolete DESCRIPTION "This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates the bearer capability for this connection. Class a service is a connection-oriented, constant bit rate ATM transport service. Class a service has end to end timing requirements and may require stringent cell loss, cell delay and cell delay variation performance.When a is displayed, the user is requesting more than an ATM only service. The network may look at the AAL to provide interworking based upon its contents. Class c service is a connection-oriented, variable bit rate ATM transport service. Class c service has no end-to-end timing requirements.When c is displayed, the user is requesting more than an ATM only service. The network interworking function may look at the AAL and provide service based on it. Class x service is a connection-oriented ATM transport service where the AAL, trafficType (cbr or vbr) and timing requirements are user defined (that is, transparent to the network). When the value of this attribute is x, the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol. Class vp service is used to indicate a transparent VP service when the user is requesting an ATM only service from the network. In this case, the network does not process any higher layer protocol. This service differs from class x service in that with the class vp service both the VCI field (except for VCI values 0, 3, 4, and 6 through 15) and Payload Type field are transported transparently by the network. This attribute value is only applicable to SPVP and SVP connections. A value of notApplicable is displayed in the case of nailed-up PVCs for which this attribute has no significance." ::= { mscAtmIfVpcTrafficEntry 71 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.10 | mscAtmIfVpcTxTrafficDescType | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.30 | mscAtmIfVpcTxQosClass | 0 | 0 | This attribute indicates the quality of service for the transmit direction for this connection. The constantBitRate class refers… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.31 | mscAtmIfVpcFwdQosClass | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.32 | mscAtmIfVpcTxQueueLength | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.33 | mscAtmIfVpcTxQueueCongestionState | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.35 | mscAtmIfVpcHoldingPriority | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.40 | mscAtmIfVpcRxTrafficDescType | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.60 | mscAtmIfVpcRxQosClass | 0 | 0 | This attribute reflects the value of the provisioned attribute in the Vcd or Vpd. Refer to that attribute for more detailed expl… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.61 | mscAtmIfVpcBwdQosClass | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.62 | mscAtmIfVpcAtmServiceCategory | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.70 | mscAtmIfVpcTrafficShaping | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.72 | mscAtmIfVpcTransferCapabilityBbc | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.74 | mscAtmIfVpcClippingBbc | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.75 | mscAtmIfVpcUnshapedTransmitQueueing | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.76 | mscAtmIfVpcBestEffort | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates va… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.80 | mscAtmIfVpcUsageParameterControl | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.85 | mscAtmIfVpcTxFrameDiscard | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.86 | mscAtmIfVpcRxFrameDiscard | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute indicates th… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.90 | mscAtmIfVpcBandwidthElastic | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is only of i… |
| 1.3.6.1.4.1.562.36.2.1.114.4.130.1.100 | mscAtmIfVpcBandwidthReduction | 0 | 0 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute shows the am… |