This attribute specifies the activation of frame discard functionality
in the backward data direction, at relay points, for this connection.
It applies to each hop of the connection. Frame discard functions
should not be requested if this connection is not transferring frame
(AAL5) traffic. Setting the value to indicated for any other traffic
type results in all traffic being discarded.
If this connection point is a permanent (provisioned) VCC mid-
point, this attribute specifies whether the Partial Packet Discard
(PPD) function is to be enabled or disabled in the receive direction
at this connecting point. The PPD function allows the connecting
point to discard the remainder of a cell-forwarded AAL5 frame if
one cell of this frame has been discarded. The PPD function
increases the 'goodput' of the link, since cells which are only going
to be discarded by the AAL5 reassembly are not received.
At a permanent VCC connecting point which is not a connection
endpoint, when this attribute is set to indicated, the PPD function is
applied to receive traffic at this connecting point. It should not be
indicated for connections whose end points are not performing
AAL5 segmentation and reassembly. When this attribute is set to
notIndicated, the PPD feature is not applied to receive traffic at this
connecting point.
At a SPVC origin on a PNNI interface, a value of indicated
specifies that frame discard is requested in the backward direction.
The frame discard function for SPVCs consists of PPD at the SPVC
origin and at all intermediate connecting points. When this attribute
is set to notIndicated, backwards frame discard is not requested in
the SPVC call setup. Thus PPD is not enabled at the SPVC origin
nor at any intermediate connecting point.
At all points along a VPC, this setting is ignored.
At a permanent VCC connection endpoint, this value is ignored. If
AAL5 segmentation and reassembly has been requested, PPD and
Early Packet Discard (EPD) are automatically enabled.
This attribute has been migrated to rxFrameDiscard.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the activation of frame discard functionality
in the backward data direction, at relay points, for this connection.
It applies to each hop of the connection. Frame discard functions
should not be requested if this connection is not transferring frame
(AAL5) traffic. Setting the value to indicated for any other traffic
type results in all traffic being discarded.
If this connection point is a permanent (provisioned) VCC mid-
point, this attribute specifies whether the Partial Packet Discard
(PPD) function is to be enabled or disabled in the receive direction
at this connecting point. The PPD function allows the connecting
point to discard the remainder of a cell-forwarded AAL5 frame if
one cell of this frame has been discarded. The PPD function
increases the 'goodput' of the link, since cells which are only going
to be discarded by the AAL5 reassembly are not received.
At a permanent VCC connecting point which is not a connection
endpoint, when this attribute is set to indicated, the PPD function is
applied to receive traffic at this connecting point. It should not be
indicated for connections whose end points are not performing
AAL5 segmentation and reassembly. When this attribute is set to
notIndicated, the PPD feature is not applied to receive traffic at this
connecting point.
At a SPVC origin on a PNNI interface, a value of indicated
specifies that frame discard is requested in the backward direction.
The frame discard function for SPVCs consists of PPD at the SPVC
origin and at all intermediate connecting points. When this attribute
is set to notIndicated, backwards frame discard is not requested in
the SPVC call setup. Thus PPD is not enabled at the SPVC origin
nor at any intermediate connecting point.
At all points along a VPC, this setting is ignored.
At a permanent VCC connection endpoint, this value is ignored. If
AAL5 segmentation and reassembly has been requested, PPD and
Early Packet Discard (EPD) are automatically enabled.
This attribute has been migrated to rxFrameDiscard.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccVcdBwdFrameDiscard OBJECT-TYPE SYNTAX INTEGER { notIndicated(0), indicated(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute specifies the activation of frame discard functionality in the backward data direction, at relay points, for this connection. It applies to each hop of the connection. Frame discard functions should not be requested if this connection is not transferring frame (AAL5) traffic. Setting the value to indicated for any other traffic type results in all traffic being discarded. If this connection point is a permanent (provisioned) VCC mid- point, this attribute specifies whether the Partial Packet Discard (PPD) function is to be enabled or disabled in the receive direction at this connecting point. The PPD function allows the connecting point to discard the remainder of a cell-forwarded AAL5 frame if one cell of this frame has been discarded. The PPD function increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not received. At a permanent VCC connecting point which is not a connection endpoint, when this attribute is set to indicated, the PPD function is applied to receive traffic at this connecting point. It should not be indicated for connections whose end points are not performing AAL5 segmentation and reassembly. When this attribute is set to notIndicated, the PPD feature is not applied to receive traffic at this connecting point. At a SPVC origin on a PNNI interface, a value of indicated specifies that frame discard is requested in the backward direction. The frame discard function for SPVCs consists of PPD at the SPVC origin and at all intermediate connecting points. When this attribute is set to notIndicated, backwards frame discard is not requested in the SPVC call setup. Thus PPD is not enabled at the SPVC origin nor at any intermediate connecting point. At all points along a VPC, this setting is ignored. At a permanent VCC connection endpoint, this value is ignored. If AAL5 segmentation and reassembly has been requested, PPD and Early Packet Discard (EPD) are automatically enabled. This attribute has been migrated to rxFrameDiscard." DEFVAL { notIndicated } ::= { mscAtmIfVccVcdTrafficEntry 77 }
mscAtmIfVccVcdBwdFrameDiscard OBJECT-TYPE SYNTAX INTEGER { notIndicated(0), indicated(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute specifies the activation of frame discard functionality in the backward data direction, at relay points, for this connection. It applies to each hop of the connection. Frame discard functions should not be requested if this connection is not transferring frame (AAL5) traffic. Setting the value to indicated for any other traffic type results in all traffic being discarded. If this connection point is a permanent (provisioned) VCC mid- point, this attribute specifies whether the Partial Packet Discard (PPD) function is to be enabled or disabled in the receive direction at this connecting point. The PPD function allows the connecting point to discard the remainder of a cell-forwarded AAL5 frame if one cell of this frame has been discarded. The PPD function increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not received. At a permanent VCC connecting point which is not a connection endpoint, when this attribute is set to indicated, the PPD function is applied to receive traffic at this connecting point. It should not be indicated for connections whose end points are not performing AAL5 segmentation and reassembly. When this attribute is set to notIndicated, the PPD feature is not applied to receive traffic at this connecting point. At a SPVC origin on a PNNI interface, a value of indicated specifies that frame discard is requested in the backward direction. The frame discard function for SPVCs consists of PPD at the SPVC origin and at all intermediate connecting points. When this attribute is set to notIndicated, backwards frame discard is not requested in the SPVC call setup. Thus PPD is not enabled at the SPVC origin nor at any intermediate connecting point. At all points along a VPC, this setting is ignored. At a permanent VCC connection endpoint, this value is ignored. If AAL5 segmentation and reassembly has been requested, PPD and Early Packet Discard (EPD) are automatically enabled. This attribute has been migrated to rxFrameDiscard." DEFVAL { notIndicated } ::= { mscAtmIfVccVcdTrafficEntry 77 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.10 | mscAtmIfVccVcdTxTrafficDescType | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the type of traffic management which is applied to t… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.20 | mscAtmIfVccVcdTxQosClass | 0 | 0 | This attribute specifies the quality of service for the transmit direction for this connection. The constantBitRate class refers… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.21 | mscAtmIfVccVcdFwdQosClass | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the quality of service for the forward direction for… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.25 | mscAtmIfVccVcdHoldingPriority | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the holding priority of this connection. In a situat… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.30 | mscAtmIfVccVcdRxTrafficDescType | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the type of traffic management which is applied to t… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.40 | mscAtmIfVccVcdRxQosClass | 0 | 0 | This attribute specifies the quality of service for the receive direction for this connection. The constantBitRate class refers … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.41 | mscAtmIfVccVcdBwdQosClass | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the quality of service for the backward direction fo… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.42 | mscAtmIfVccVcdAtmServiceCategory | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the ATM service category for both directions of the … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.50 | mscAtmIfVccVcdTrafficShaping | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies whether this connection uses traffic shaping when tr… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.60 | mscAtmIfVccVcdUnshapedTransmitQueueing | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute only applies when this connection is unshaped. This attribute … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.70 | mscAtmIfVccVcdUsageParameterControl | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies whether this connection enforces usage parameter con… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.71 | mscAtmIfVccVcdBearerClassBbc | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the bearer capability. This attribute is only used f… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.72 | mscAtmIfVccVcdTransferCapabilityBbc | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the transfer capability for this connection. Uni 3.0… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.74 | mscAtmIfVccVcdClippingBbc | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the value for the clipping susceptibility parameter … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.75 | mscAtmIfVccVcdBestEffort | 0 | 0 | This attribute is migrated to the AtmTmProv group. This attribute specifies the value of the best effort parameter in the ATM Tr… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.110.1.76 | mscAtmIfVccVcdFwdFrameDiscard | 0 | 0 | This attribute specifies the activation of frame discard functionality in the forward data direction, at relay points, for this … |