This attribute is HISTORICAL. Please refer to the attribute of the
same name in the group AtmTmOper.
This attribute is a vector of five transmit traffic parameters. The first
three elements reflect the settings of the first three elements of the
txTrafficDescParm attribute in the AtmTrafficProv group.
When txTrafficDescType is 1 or 2, parameters 1 through 5 are
unused.
In this description, PCR is the greater of either the PCR or the
requested shaping rate (parameter 1 or parameter 5) specified in the
Traffic group under the Vcd or Vpd.
When txTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused.
When txTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard.
When txTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging.
When txTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic.
When txTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic.
When txTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic
When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 4 reflects
the actual shaping rate in cell/s for this connection. This rate is one
of the set of available shaping rates for this type of ATM-FP, based
on the number of interfaces doing shaping (attribute
perVcQueueInterfaces), the provisioned cell rate, the
shapingScalingFactor attribute of the AtmResourceControl
component, and whether traffic shaping is enabled. A rate of zero
(0) indicates that shaping is not performed.
When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 5 reflects
the equivalent cell rate in cell/s for this connection as determined by
the Connection Admission Control (CAC) algorithm. The
equivalent cell rate is useful in determining the admission
characteristics of this connection.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute is HISTORICAL. Please refer to the attribute of the
same name in the group AtmTmOper.
This attribute is a vector of five transmit traffic parameters. The first
three elements reflect the settings of the first three elements of the
txTrafficDescParm attribute in the AtmTrafficProv group.
When txTrafficDescType is 1 or 2, parameters 1 through 5 are
unused.
In this description, PCR is the greater of either the PCR or the
requested shaping rate (parameter 1 or parameter 5) specified in the
Traffic group under the Vcd or Vpd.
When txTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused.
When txTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard.
When txTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging.
When txTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic.
When txTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic.
When txTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic
When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 4 reflects
the actual shaping rate in cell/s for this connection. This rate is one
of the set of available shaping rates for this type of ATM-FP, based
on the number of interfaces doing shaping (attribute
perVcQueueInterfaces), the provisioned cell rate, the
shapingScalingFactor attribute of the AtmResourceControl
component, and whether traffic shaping is enabled. A rate of zero
(0) indicates that shaping is not performed.
When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 5 reflects
the equivalent cell rate in cell/s for this connection as determined by
the Connection Admission Control (CAC) algorithm. The
equivalent cell rate is useful in determining the admission
characteristics of this connection.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccTxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVccTxTdpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector of five transmit traffic parameters. The first three elements reflect the settings of the first three elements of the txTrafficDescParm attribute in the AtmTrafficProv group. When txTrafficDescType is 1 or 2, parameters 1 through 5 are unused. In this description, PCR is the greater of either the PCR or the requested shaping rate (parameter 1 or parameter 5) specified in the Traffic group under the Vcd or Vpd. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 4 reflects the actual shaping rate in cell/s for this connection. This rate is one of the set of available shaping rates for this type of ATM-FP, based on the number of interfaces doing shaping (attribute perVcQueueInterfaces), the provisioned cell rate, the shapingScalingFactor attribute of the AtmResourceControl component, and whether traffic shaping is enabled. A rate of zero (0) indicates that shaping is not performed. When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 5 reflects the equivalent cell rate in cell/s for this connection as determined by the Connection Admission Control (CAC) algorithm. The equivalent cell rate is useful in determining the admission characteristics of this connection." ::= { mscAtmIfVcc 294 }
mscAtmIfVccTxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVccTxTdpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector of five transmit traffic parameters. The first three elements reflect the settings of the first three elements of the txTrafficDescParm attribute in the AtmTrafficProv group. When txTrafficDescType is 1 or 2, parameters 1 through 5 are unused. In this description, PCR is the greater of either the PCR or the requested shaping rate (parameter 1 or parameter 5) specified in the Traffic group under the Vcd or Vpd. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 4 reflects the actual shaping rate in cell/s for this connection. This rate is one of the set of available shaping rates for this type of ATM-FP, based on the number of interfaces doing shaping (attribute perVcQueueInterfaces), the provisioned cell rate, the shapingScalingFactor attribute of the AtmResourceControl component, and whether traffic shaping is enabled. A rate of zero (0) indicates that shaping is not performed. When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 5 reflects the equivalent cell rate in cell/s for this connection as determined by the Connection Admission Control (CAC) algorithm. The equivalent cell rate is useful in determining the admission characteristics of this connection." ::= { mscAtmIfVcc 294 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.294.1 | mscAtmIfVccTxTdpEntry | 2 | 2 | An entry in the mscAtmIfVccTxTdpTable. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.1 | mscAtmIfVccRowStatusTable | 1 | 5 | This entry controls the addition and deletion of mscAtmIfVcc components. |
| 1.3.6.1.4.1.562.36.2.1.114.5.2 | mscAtmIfVccVcd | 10 | 128 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.3 | mscAtmIfVccLoop | 1 | 6 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.4 | mscAtmIfVccNrp | 2 | 15 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.5 | mscAtmIfVccNep | 2 | 9 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.6 | mscAtmIfVccTest | 4 | 34 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.7 | mscAtmIfVccTm | 8 | 73 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.8 | mscAtmIfVccSrc | 4 | 30 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.9 | mscAtmIfVccEp | 2 | 9 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.10 | mscAtmIfVccRp | 3 | 12 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.11 | mscAtmIfVccDst | 2 | 11 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.12 | mscAtmIfVccEbrInfo | 3 | 15 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.13 | mscAtmIfVccMnrp | 3 | 15 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.14 | mscAtmIfVccPm | 5 | 57 | None |
| 1.3.6.1.4.1.562.36.2.1.114.5.100 | mscAtmIfVccStateTable | 1 | 4 | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies abou… |
| 1.3.6.1.4.1.562.36.2.1.114.5.110 | mscAtmIfVccOperTable | 1 | 2 | This group contains operational information for a Vcc, Vpc, or Vpt component. |
| 1.3.6.1.4.1.562.36.2.1.114.5.115 | mscAtmIfVccConnInfoTable | 1 | 4 | This group contains operational connection characteristics information for a Vcc component. |
| 1.3.6.1.4.1.562.36.2.1.114.5.120 | mscAtmIfVccStatusTable | 1 | 10 | This group contains operational status information for a Vcc, Vpc or Vpt component. |
| 1.3.6.1.4.1.562.36.2.1.114.5.130 | mscAtmIfVccTrafficTable | 1 | 22 | This group is HISTORICAL. Please refer to the group AtmTmOper; This attribute group contains attributes for the Vcc and Vpc comp… |
| 1.3.6.1.4.1.562.36.2.1.114.5.140 | mscAtmIfVccStatsTable | 1 | 21 | This group contains traffic statistics for a Vcc, Vpc, or Vpt component. |
| 1.3.6.1.4.1.562.36.2.1.114.5.150 | mscAtmIfVccPerfTable | 1 | 6 | mscAtmIfVccPerftable |
| 1.3.6.1.4.1.562.36.2.1.114.5.295 | mscAtmIfVccRxTdpTable | 1 | 3 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector … |
| 1.3.6.1.4.1.562.36.2.1.114.5.352 | mscAtmIfVccTxQThreshTable | 1 | 3 | mscAtmIfVccTxQThreshtable |
| 1.3.6.1.4.1.562.36.2.1.114.5.357 | mscAtmIfVccFqpTable | 1 | 3 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector … |
| 1.3.6.1.4.1.562.36.2.1.114.5.358 | mscAtmIfVccBqpTable | 1 | 3 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector … |