This attribute counts the number of frames received from the
interface on this connection that have AAL5 length errors or AAL5
CRC errors.
This attribute is not applicable and is not displayed on CQC-based
ATM cards.
AAL5 length or CRC errors typically occur because of cell discards
due to congestion, UPC, or due to corruption of data between the
AAL5 segmentation and reassembly end points.
This attribute is applicable only to connections that reassemble
incoming cells into frames. Such connections have a
connectionPointType of connectionEndPoint. AAL1 connections
are an exception to this rule; although they have a
connectionPointType of connectionEndPoint, they do not do
adaptation at this point. For Vpts, this attribute provides an
aggregated total of all rxAal5FrameError values for all applicable
connections associated with the Vpt.
For Vpcs and for Vccs that relay cells without adaptation, this
attribute is not applicable and is not displayed.
The counter wraps to zero if it exceeds its maximum value of
(2**64)-1.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute counts the number of frames received from the
interface on this connection that have AAL5 length errors or AAL5
CRC errors.
This attribute is not applicable and is not displayed on CQC-based
ATM cards.
AAL5 length or CRC errors typically occur because of cell discards
due to congestion, UPC, or due to corruption of data between the
AAL5 segmentation and reassembly end points.
This attribute is applicable only to connections that reassemble
incoming cells into frames. Such connections have a
connectionPointType of connectionEndPoint. AAL1 connections
are an exception to this rule; although they have a
connectionPointType of connectionEndPoint, they do not do
adaptation at this point. For Vpts, this attribute provides an
aggregated total of all rxAal5FrameError values for all applicable
connections associated with the Vpt.
For Vpcs and for Vccs that relay cells without adaptation, this
attribute is not applicable and is not displayed.
The counter wraps to zero if it exceeds its maximum value of
(2**64)-1.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVptStatsRxAal5FrameError OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames received from the interface on this connection that have AAL5 length errors or AAL5 CRC errors. This attribute is not applicable and is not displayed on CQC-based ATM cards. AAL5 length or CRC errors typically occur because of cell discards due to congestion, UPC, or due to corruption of data between the AAL5 segmentation and reassembly end points. This attribute is applicable only to connections that reassemble incoming cells into frames. Such connections have a connectionPointType of connectionEndPoint. AAL1 connections are an exception to this rule; although they have a connectionPointType of connectionEndPoint, they do not do adaptation at this point. For Vpts, this attribute provides an aggregated total of all rxAal5FrameError values for all applicable connections associated with the Vpt. For Vpcs and for Vccs that relay cells without adaptation, this attribute is not applicable and is not displayed. The counter wraps to zero if it exceeds its maximum value of (2**64)-1." ::= { mscAtmIfVptStatsEntry 100 }
mscAtmIfVptStatsRxAal5FrameError OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames received from the interface on this connection that have AAL5 length errors or AAL5 CRC errors. This attribute is not applicable and is not displayed on CQC-based ATM cards. AAL5 length or CRC errors typically occur because of cell discards due to congestion, UPC, or due to corruption of data between the AAL5 segmentation and reassembly end points. This attribute is applicable only to connections that reassemble incoming cells into frames. Such connections have a connectionPointType of connectionEndPoint. AAL1 connections are an exception to this rule; although they have a connectionPointType of connectionEndPoint, they do not do adaptation at this point. For Vpts, this attribute provides an aggregated total of all rxAal5FrameError values for all applicable connections associated with the Vpt. For Vpcs and for Vccs that relay cells without adaptation, this attribute is not applicable and is not displayed. The counter wraps to zero if it exceeds its maximum value of (2**64)-1." ::= { mscAtmIfVptStatsEntry 100 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.10 | mscAtmIfVptStatsTxCell | 0 | 0 | This attribute counts the number of cells that have been transmitted from the interface on this connection. The counter wraps to… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.20 | mscAtmIfVptStatsTxCellClp | 0 | 0 | This attribute counts the number of cells that have been transmitted from the interface on this connection with the CLP=1. The c… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.30 | mscAtmIfVptTxDiscard | 0 | 0 | This attribute is replaced by new attributes txCellDiscard and txFrameDiscard. This attribute counts the number of cells or fram… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.40 | mscAtmIfVptTxDiscardClp | 0 | 0 | This attribute is replaced by new attributes txCellDiscardClp and txFrameDiscardClp. This attribute counts the number of cells o… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.42 | mscAtmIfVptStatsTxCellDiscard | 0 | 0 | This attribute counts the number of cells received from the bus on this connection that have been discarded. Discarded cells are… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.43 | mscAtmIfVptStatsTxCellDiscardClp | 0 | 0 | This attribute counts the number of cells received from the bus on this connection with CLP=1 that have been discarded. This cou… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.46 | mscAtmIfVptStatsTxFrameDiscard | 0 | 0 | This attribute counts the number of frames received from the bus on this connection that have been discarded. Frames are discard… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.47 | mscAtmIfVptStatsTxFrameDiscardClp | 0 | 0 | This attribute counts the number of discarded frames on this connection that were received from the bus and composed of one or mo… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.50 | mscAtmIfVptStatsRxCell | 0 | 0 | This attribute counts the number of cells that have been received from the interface on this connection. The counter wraps to ze… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.60 | mscAtmIfVptStatsRxCellClp | 0 | 0 | This attribute counts the number of cells that have been received from the interface on this connection with the CLP=1. The coun… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.70 | mscAtmIfVptRxDiscard | 0 | 0 | This attribute is replaced by new attributes rxCellDiscard and rxFrameDiscard. This attribute counts the number of cells or fram… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.80 | mscAtmIfVptRxDiscardClp | 0 | 0 | This attribute is replaced by new attributes rxCellDiscardClp and rxFrameDiscardClp. This attribute counts the number of cells o… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.82 | mscAtmIfVptStatsRxCellDiscard | 0 | 0 | This attribute counts the number of cells received from the interface on this connection that have been discarded. This count is… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.83 | mscAtmIfVptStatsRxCellDiscardClp | 0 | 0 | This attribute counts the number of cells received from the interface on this connection with CLP=1 that have been discarded. Th… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.86 | mscAtmIfVptStatsRxFrameDiscard | 0 | 0 | This attribute counts the number of frames received from the interface on this connection that have been discarded. This count i… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.88 | mscAtmIfVptStatsRxFrameDiscardClp | 0 | 0 | This attribute counts the number of discarded frames on this connection that were received from the interface and composed of one… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.90 | mscAtmIfVptStatsRxUpcViolationOnEnforcer1 | 0 | 0 | This attribute counts the number of UPC violations observed by the Generic Cell Rate Algorithm (GCRA) Enforcer 1. This attribute… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.92 | mscAtmIfVptStatsRxUpcViolationOnEnforcer2 | 0 | 0 | This attribute counts the number of UPC violations observed by the Generic Cell Rate Algorithm (GCRA) Enforcer 2. This attribute… |
| 1.3.6.1.4.1.562.36.2.1.114.9.140.1.102 | mscAtmIfVptStatsRxAal5FrameAbort | 0 | 0 | This attribute counts the number of frames received from the interface on this connection that have the AAL5 length field set to… |