This attribute is migrated to the AtmTmProv group.
This attribute is a vector of five traffic parameters whose meanings
are defined by the txTrafficDescType attribute. The values of peak
cell rate (PCR), sustained cell rate (SCR) and requested shaping rate
are expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When txTrafficDescType is 1 or 2, all of the parameters must be set
to zero.
When txTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When txTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic with cell discard; parameter 2
represents the PCR for CLP equal to 0 traffic; parameter 4
represents the CDVT; and parameter 5 represents the requested
shaping rate. A non-zero value in parameter 5 overrides any value in
parameter 1. This result is used as the PCR. Parameter 1 must be
greater than or equal to parameter 2. Parameters 1 and 2 must be
non-zero. Parameter 3 must be zero.
When txTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic with cell tagging; parameter 2
represents the PCR for CLP equal to 0 traffic; parameter 4
represents the CDVT; and parameter 5 represents the requested
shaping rate. A non-zero value in parameter 5 overrides any value in
parameter 1. This result is used as the PCR. Parameter 1 must be
greater than or equal to parameter 2. Parameters 1 and 2 must be
non-zero. Parameter 3 must be zero.
When txTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2 and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5, must either be zero (unused) or greater than or equal to parameter
2.
When txTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 with cell discard; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2 and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5, must either be zero (unused) or greater than or equal to parameter
2.
When txTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT;
and parameter 5 represents the requested shaping rate. A non-zero
value in parameter 5 overrides any value in parameter 1. This result
is used as the PCR. Parameters 1, 2 and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5, must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For txTrafficDescType 3, 4 and 5, the transmit traffic is shaped at
the next rate less than the PCR.
For txTrafficDescType 6, 7 and 8, the transmit traffic is shaped at
the highest available rate which is between PCR and SCR.
However, if there is no available shaping rate between PCR and
SCR, traffic is shaped at the next rate above the PCR.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute is migrated to the AtmTmProv group.
This attribute is a vector of five traffic parameters whose meanings
are defined by the txTrafficDescType attribute. The values of peak
cell rate (PCR), sustained cell rate (SCR) and requested shaping rate
are expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When txTrafficDescType is 1 or 2, all of the parameters must be set
to zero.
When txTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When txTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic with cell discard; parameter 2
represents the PCR for CLP equal to 0 traffic; parameter 4
represents the CDVT; and parameter 5 represents the requested
shaping rate. A non-zero value in parameter 5 overrides any value in
parameter 1. This result is used as the PCR. Parameter 1 must be
greater than or equal to parameter 2. Parameters 1 and 2 must be
non-zero. Parameter 3 must be zero.
When txTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic with cell tagging; parameter 2
represents the PCR for CLP equal to 0 traffic; parameter 4
represents the CDVT; and parameter 5 represents the requested
shaping rate. A non-zero value in parameter 5 overrides any value in
parameter 1. This result is used as the PCR. Parameter 1 must be
greater than or equal to parameter 2. Parameters 1 and 2 must be
non-zero. Parameter 3 must be zero.
When txTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2 and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5, must either be zero (unused) or greater than or equal to parameter
2.
When txTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 with cell discard; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2 and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5, must either be zero (unused) or greater than or equal to parameter
2.
When txTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT;
and parameter 5 represents the requested shaping rate. A non-zero
value in parameter 5 overrides any value in parameter 1. This result
is used as the PCR. Parameters 1, 2 and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5, must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For txTrafficDescType 3, 4 and 5, the transmit traffic is shaped at
the next rate less than the PCR.
For txTrafficDescType 6, 7 and 8, the transmit traffic is shaped at
the highest available rate which is between PCR and SCR.
However, if there is no available shaping rate between PCR and
SCR, traffic is shaped at the next rate above the PCR.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVptVpdTxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptVpdTxTdpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute is migrated to the AtmTmProv group. This attribute is a vector of five traffic parameters whose meanings are defined by the txTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When txTrafficDescType is 1 or 2, all of the parameters must be set to zero. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic with cell discard; parameter 2 represents the PCR for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be greater than or equal to parameter 2. Parameters 1 and 2 must be non-zero. Parameter 3 must be zero. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic with cell tagging; parameter 2 represents the PCR for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be greater than or equal to parameter 2. Parameters 1 and 2 must be non-zero. Parameter 3 must be zero. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For txTrafficDescType 3, 4 and 5, the transmit traffic is shaped at the next rate less than the PCR. For txTrafficDescType 6, 7 and 8, the transmit traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR." ::= { mscAtmIfVptVpd 297 }
mscAtmIfVptVpdTxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptVpdTxTdpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute is migrated to the AtmTmProv group. This attribute is a vector of five traffic parameters whose meanings are defined by the txTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When txTrafficDescType is 1 or 2, all of the parameters must be set to zero. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic with cell discard; parameter 2 represents the PCR for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be greater than or equal to parameter 2. Parameters 1 and 2 must be non-zero. Parameter 3 must be zero. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic with cell tagging; parameter 2 represents the PCR for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be greater than or equal to parameter 2. Parameters 1 and 2 must be non-zero. Parameter 3 must be zero. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For txTrafficDescType 3, 4 and 5, the transmit traffic is shaped at the next rate less than the PCR. For txTrafficDescType 6, 7 and 8, the transmit traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR." ::= { mscAtmIfVptVpd 297 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.2.297.1 | mscAtmIfVptVpdTxTdpEntry | 2 | 2 | An entry in the mscAtmIfVptVpdTxTdpTable. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.2.1 | mscAtmIfVptVpdRowStatusTable | 1 | 5 | This entry controls the addition and deletion of mscAtmIfVptVpd components. |
| 1.3.6.1.4.1.562.36.2.1.114.9.2.2 | mscAtmIfVptVpdTm | 7 | 65 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.2.100 | mscAtmIfVptVpdLbkTable | 1 | 5 | This group contains the provisionable loopback attributes for a Vcc, Vpc, or Vpt component. Note that certain loopback requests … |
| 1.3.6.1.4.1.562.36.2.1.114.9.2.110 | mscAtmIfVptVpdTrafficTable | 1 | 18 | This group contains traffic related provisionable attributes for the Vcc and Vpc components. The attributes' operational values … |
| 1.3.6.1.4.1.562.36.2.1.114.9.2.111 | mscAtmIfVptVpdAcctTable | 1 | 2 | This group contains the provisionable ATM accounting attributes for a Vcc, Vpc, or Vpt component. |
| 1.3.6.1.4.1.562.36.2.1.114.9.2.112 | mscAtmIfVptVpdProvTable | 1 | 2 | This group contains the provisionable ATM Virtual Path Descriptor attributes for a Vpt component. |
| 1.3.6.1.4.1.562.36.2.1.114.9.2.298 | mscAtmIfVptVpdRxTdpTable | 1 | 3 | This attribute is migrated to the AtmTmProv group. This attribute is a vector of four traffic parameters whose meanings are defi… |
| 1.3.6.1.4.1.562.36.2.1.114.9.2.359 | mscAtmIfVptVpdFqpTable | 1 | 3 | This attribute is migrated to the AtmTmProv group. This attribute is a vector of three elements that specify the quality of serv… |
| 1.3.6.1.4.1.562.36.2.1.114.9.2.360 | mscAtmIfVptVpdBqpTable | 1 | 3 | This attribute is migrated to the AtmTmProv group. This attribute is a vector of three elements that specify the quality of serv… |