This attribute is HISTORICAL. Please refer to the attribute of the
same name in the group AtmTmOper.
This attribute is a vector of four traffic parameters whose meanings
are defined by the rxTrafficDescType attribute. The values of peak
cell rate (PCR), sustained cell rate (SCR) are expressed in cells/s.
Maximum burst size (MBS) is expressed in cells. Cell Delay
Variation Tolerance (CDVT) is expressed in microseconds.
When rxTrafficDescType is 1 or 2, none of the parameters are used.
When rxTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard; parameter 4 represents the
CDVT.
When rxTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging; parameter 4 represents the
CDVT.
When rxTrafficDescType is a 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT.
If Upc is disabled for this connection, the values of PCR, SCR,
MBS and CDVT is a combination of provisioned parameters. If Upc
is enabled, the values of PCR, SCR, MBS, and CDVT is exactly the
values used by the usage parameter control hardware in policing the
arriving traffic. These may vary slightly from the provisioned values
due to granularity of the hardware. In the case where the PCR is
equal to the SCR, the effective MBS is zero.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute is HISTORICAL. Please refer to the attribute of the
same name in the group AtmTmOper.
This attribute is a vector of four traffic parameters whose meanings
are defined by the rxTrafficDescType attribute. The values of peak
cell rate (PCR), sustained cell rate (SCR) are expressed in cells/s.
Maximum burst size (MBS) is expressed in cells. Cell Delay
Variation Tolerance (CDVT) is expressed in microseconds.
When rxTrafficDescType is 1 or 2, none of the parameters are used.
When rxTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard; parameter 4 represents the
CDVT.
When rxTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging; parameter 4 represents the
CDVT.
When rxTrafficDescType is a 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT.
If Upc is disabled for this connection, the values of PCR, SCR,
MBS and CDVT is a combination of provisioned parameters. If Upc
is enabled, the values of PCR, SCR, MBS, and CDVT is exactly the
values used by the usage parameter control hardware in policing the
arriving traffic. These may vary slightly from the provisioned values
due to granularity of the hardware. In the case where the PCR is
equal to the SCR, the effective MBS is zero.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVptVccRxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptVccRxTdpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector of four traffic parameters whose meanings are defined by the rxTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) are expressed in cells/s. Maximum burst size (MBS) is expressed in cells. Cell Delay Variation Tolerance (CDVT) is expressed in microseconds. When rxTrafficDescType is 1 or 2, none of the parameters are used. When rxTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard; parameter 4 represents the CDVT. When rxTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging; parameter 4 represents the CDVT. When rxTrafficDescType is a 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT. If Upc is disabled for this connection, the values of PCR, SCR, MBS and CDVT is a combination of provisioned parameters. If Upc is enabled, the values of PCR, SCR, MBS, and CDVT is exactly the values used by the usage parameter control hardware in policing the arriving traffic. These may vary slightly from the provisioned values due to granularity of the hardware. In the case where the PCR is equal to the SCR, the effective MBS is zero." ::= { mscAtmIfVptVcc 295 }
mscAtmIfVptVccRxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptVccRxTdpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector of four traffic parameters whose meanings are defined by the rxTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) are expressed in cells/s. Maximum burst size (MBS) is expressed in cells. Cell Delay Variation Tolerance (CDVT) is expressed in microseconds. When rxTrafficDescType is 1 or 2, none of the parameters are used. When rxTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard; parameter 4 represents the CDVT. When rxTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging; parameter 4 represents the CDVT. When rxTrafficDescType is a 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT. If Upc is disabled for this connection, the values of PCR, SCR, MBS and CDVT is a combination of provisioned parameters. If Upc is enabled, the values of PCR, SCR, MBS, and CDVT is exactly the values used by the usage parameter control hardware in policing the arriving traffic. These may vary slightly from the provisioned values due to granularity of the hardware. In the case where the PCR is equal to the SCR, the effective MBS is zero." ::= { mscAtmIfVptVcc 295 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.20.295.1 | mscAtmIfVptVccRxTdpEntry | 2 | 2 | An entry in the mscAtmIfVptVccRxTdpTable. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.20.1 | mscAtmIfVptVccRowStatusTable | 1 | 5 | This entry controls the addition and deletion of mscAtmIfVptVcc components. |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.2 | mscAtmIfVptVccVcd | 10 | 128 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.3 | mscAtmIfVptVccLoop | 1 | 6 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.4 | mscAtmIfVptVccNrp | 2 | 15 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.5 | mscAtmIfVptVccNep | 2 | 9 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.6 | mscAtmIfVptVccTest | 4 | 34 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.7 | mscAtmIfVptVccTm | 8 | 73 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.8 | mscAtmIfVptVccSrc | 4 | 30 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.9 | mscAtmIfVptVccEp | 2 | 9 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.10 | mscAtmIfVptVccRp | 3 | 12 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.11 | mscAtmIfVptVccDst | 2 | 11 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.12 | mscAtmIfVptVccEbrInfo | 3 | 15 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.13 | mscAtmIfVptVccMnrp | 3 | 15 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.100 | mscAtmIfVptVccStateTable | 1 | 4 | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies abou… |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.110 | mscAtmIfVptVccOperTable | 1 | 2 | This group contains operational information for a Vcc, Vpc, or Vpt component. |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.115 | mscAtmIfVptVccConnInfoTable | 1 | 4 | This group contains operational connection characteristics information for a Vcc component. |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.120 | mscAtmIfVptVccStatusTable | 1 | 10 | This group contains operational status information for a Vcc, Vpc or Vpt component. |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.130 | mscAtmIfVptVccTrafficTable | 1 | 22 | This group is HISTORICAL. Please refer to the group AtmTmOper; This attribute group contains attributes for the Vcc and Vpc comp… |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.140 | mscAtmIfVptVccStatsTable | 1 | 21 | This group contains traffic statistics for a Vcc, Vpc, or Vpt component. |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.294 | mscAtmIfVptVccTxTdpTable | 1 | 3 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector … |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.352 | mscAtmIfVptVccTxQThreshTable | 1 | 3 | mscAtmIfVptVccTxQThreshtable |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.357 | mscAtmIfVptVccFqpTable | 1 | 3 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector … |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.358 | mscAtmIfVptVccBqpTable | 1 | 3 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector … |