This attribute is obsolete in P4.2 and has been migrated under Vcd
(Vpd) component.
This attribute specifies whether the AAL5 Partial Packet Discard
(PPD) feature has been enabled or disabled on the Nrp in the
receive direction. This feature allows the NRP to discard the
remainder of a cell-forwarded AAL5 frame if a cell of this frame
has been discarded due to congestion or usage parameter control
(UPC). This increases the 'goodput' of the link, since cells which
are only going to be discarded by the AAL5 reassembly are not
transmitted.
When this attribute is set to enabled, the PPD feature is applied in
the receive direction. It should only be enabled for connections
whose end points are performing AAL5 segmentation and
reassembly. When this attribute is set to disabled, the PPD feature is
not applied to traffic for this connection in the receive direction.
When this attribute is set to sameAsTx, the PPD feature for traffic
in the receive direction will be configured the same way as it is in
the transmit direction.
Note that specifying enabled for a non-AAL5 connection will cause
all traffic to be discarded once congestion is encountered.
Parsed from file nortelPC-atmBearerServiceV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB
This attribute is obsolete in P4.2 and has been migrated under Vcd
(Vpd) component.
This attribute specifies whether the AAL5 Partial Packet Discard
(PPD) feature has been enabled or disabled on the Nrp in the
receive direction. This feature allows the NRP to discard the
remainder of a cell-forwarded AAL5 frame if a cell of this frame
has been discarded due to congestion or usage parameter control
(UPC). This increases the 'goodput' of the link, since cells which
are only going to be discarded by the AAL5 reassembly are not
transmitted.
When this attribute is set to enabled, the PPD feature is applied in
the receive direction. It should only be enabled for connections
whose end points are performing AAL5 segmentation and
reassembly. When this attribute is set to disabled, the PPD feature is
not applied to traffic for this connection in the receive direction.
When this attribute is set to sameAsTx, the PPD feature for traffic
in the receive direction will be configured the same way as it is in
the transmit direction.
Note that specifying enabled for a non-AAL5 connection will cause
all traffic to be discarded once congestion is encountered.
Parsed from file Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB
[Automatically extracted from oidview.com]
mscAtmIfVptVccNrpRxAal5PartialPacketDiscard OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1), sameAsTx(2) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the receive direction. This feature allows the NRP to discard the remainder of a cell-forwarded AAL5 frame if a cell of this frame has been discarded due to congestion or usage parameter control (UPC). This increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not transmitted. When this attribute is set to enabled, the PPD feature is applied in the receive direction. It should only be enabled for connections whose end points are performing AAL5 segmentation and reassembly. When this attribute is set to disabled, the PPD feature is not applied to traffic for this connection in the receive direction. When this attribute is set to sameAsTx, the PPD feature for traffic in the receive direction will be configured the same way as it is in the transmit direction. Note that specifying enabled for a non-AAL5 connection will cause all traffic to be discarded once congestion is encountered." DEFVAL { sameAsTx } ::= { mscAtmIfVptVccNrpProvEntry 32 }
mscAtmIfVptVccNrpRxAal5PartialPacketDiscard OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1), sameAsTx(2) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the receive direction. This feature allows the NRP to discard the remainder of a cell-forwarded AAL5 frame if a cell of this frame has been discarded due to congestion or usage parameter control (UPC). This increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not transmitted. When this attribute is set to enabled, the PPD feature is applied in the receive direction. It should only be enabled for connections whose end points are performing AAL5 segmentation and reassembly. When this attribute is set to disabled, the PPD feature is not applied to traffic for this connection in the receive direction. When this attribute is set to sameAsTx, the PPD feature for traffic in the receive direction will be configured the same way as it is in the transmit direction. Note that specifying enabled for a non-AAL5 connection will cause all traffic to be discarded once congestion is encountered." DEFVAL { sameAsTx } ::= { mscAtmIfVptVccNrpProvEntry 32 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.10 | mscAtmIfVptVccNrpNextHop | 0 | 0 | This attribute specifies the Nrp component with which this Nrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp. |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.20 | mscAtmIfVptVccNrpConnectionPointType | 0 | 0 | This attribute specifies the connection point type desired for a Nrp component. The actual connection point type value is visibl… |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.30 | mscAtmIfVptVccNrpOamSegmentBoundary | 0 | 0 | This attribute specifies the OAM segment boundary desired for a Nrp component. It affects the connection point type value visibl… |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.31 | mscAtmIfVptVccNrpTxAal5PartialPacketDiscard | 0 | 0 | This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Pa… |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.33 | mscAtmIfVptVccNrpBandwidthElastic | 0 | 0 | This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the band… |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.34 | mscAtmIfVptVccNrpOverrideHoldingPriority | 0 | 0 | This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some… |