This attribute specifies the cause code sent to the originating PBX
when PORS fails to establish a call due to congestion or a disabled
trunk. It is also generated when the calling side fails to decode
payload capabilities sent by the called side.
If the component is not added or if the default value autoConfigure
is provisioned for the attribute the cause code sent to the originating
PBX is not manipulated and the clearing process is not influenced.
For this case, a typical cause code value sent back to the originating
PBX is 41.
VALUES (
128 = autoConfigure
)
Parsed from file nortelPC-voiceNetworkingV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB
This attribute specifies the cause code sent to the originating PBX
when PORS fails to establish a call due to congestion or a disabled
trunk. It is also generated when the calling side fails to decode
payload capabilities sent by the called side.
If the component is not added or if the default value autoConfigure
is provisioned for the attribute the cause code sent to the originating
PBX is not manipulated and the clearing process is not influenced.
For this case, a typical cause code value sent back to the originating
PBX is 41.
VALUES (
128 = autoConfigure
)
Parsed from file Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB.mib
Module: Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB
[Automatically extracted from oidview.com]
mscSigChanICmapTempFailureCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when PORS fails to establish a call due to congestion or a disabled trunk. It is also generated when the calling side fails to decode payload capabilities sent by the called side. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 41. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { mscSigChanICmapIntCauseEntry 3 }
mscSigChanICmapTempFailureCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when PORS fails to establish a call due to congestion or a disabled trunk. It is also generated when the calling side fails to decode payload capabilities sent by the called side. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 41. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { mscSigChanICmapIntCauseEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.115.18.100.1.1 | mscSigChanICmapEgressLinkOutOfServCause | 0 | 0 | This attribute specifies the cause code sent to the originating PBX when the data link to the remote PBX is down or when remote c… |
| 1.3.6.1.4.1.562.36.2.1.115.18.100.1.2 | mscSigChanICmapChanOrCircNotAvailCause | 0 | 0 | This attribute specifies the cause code sent to the originating PBX if no timeslot is available for an incoming call. If the comp… |
| 1.3.6.1.4.1.562.36.2.1.115.18.100.1.4 | mscSigChanICmapSwitchCongestCause | 0 | 0 | This attribute specifies the cause code sent to the originating PBX when the allocation of internal resources for an incoming ca… |
| 1.3.6.1.4.1.562.36.2.1.115.18.100.1.5 | mscSigChanICmapReqChanOrCircNotAvailCause | 0 | 0 | This attribute specifies the cause code sent to the originating PBX when an exclusively requested channel is not in service or a… |
| 1.3.6.1.4.1.562.36.2.1.115.18.100.1.6 | mscSigChanICmapResourceUnavailCause | 0 | 0 | This attribute specifies the cause code sent to the originating PBX when the path establishing timer expires, when the switched … |
| 1.3.6.1.4.1.562.36.2.1.115.18.100.1.7 | mscSigChanICmapServNotAllowedCause | 0 | 0 | This attribute specifies the cause code sent to the originating PBX when the requested call type (voice or data) is not compatib… |
| 1.3.6.1.4.1.562.36.2.1.115.18.100.1.8 | mscSigChanICmapNoSuchChannelCause | 0 | 0 | This attribute specifies the cause code sent to the originating PBX when a requested channel does not exist. If the component is … |
| 1.3.6.1.4.1.562.36.2.1.115.18.100.1.9 | mscSigChanICmapIncompatDestCause | 0 | 0 | This attribute specifies the cause code sent to the originating PBX when the calling and called side capabilities do not match. I… |