This attribute defines the intended gender of the X21 component
(V.11 interface). The actual gender of the interface is determined by
the physical connection to the patch panel. If the hardware setup
does not match this attribute, an alarm will be generated.
In dte mode, the control line signal is driven as specified by the
attribute readyLineState when the interface passes its initial
diagnostics. Then, the control line signal will be driven as specified
in the attribute dataTransferLineState when the application is ready
to transfer data. On the other hand, the input line signal (indication)
is compared against those specified in the attributes readyLineState
and dataTransferLineState. The application will be notified when
the specified line states are observed.
In dce mode, the X21 component behaves similarly as when it is in
dte mode. However, it will be driving the DCE line signal (control)
and monitoring the DTE line signal (indication) as specified by the
attributes readyLineState and dataTransferLineState.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute defines the intended gender of the X21 component
(V.11 interface). The actual gender of the interface is determined by
the physical connection to the patch panel. If the hardware setup
does not match this attribute, an alarm will be generated.
In dte mode, the control line signal is driven as specified by the
attribute readyLineState when the interface passes its initial
diagnostics. Then, the control line signal will be driven as specified
in the attribute dataTransferLineState when the application is ready
to transfer data. On the other hand, the input line signal (indication)
is compared against those specified in the attributes readyLineState
and dataTransferLineState. The application will be notified when
the specified line states are observed.
In dce mode, the X21 component behaves similarly as when it is in
dte mode. However, it will be driving the DCE line signal (control)
and monitoring the DTE line signal (indication) as specified by the
attributes readyLineState and dataTransferLineState.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpX21LinkMode OBJECT-TYPE SYNTAX INTEGER { dte(0), dce(128) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState." DEFVAL { dte } ::= { mscLpX21ProvEntry 1 }
mscLpX21LinkMode OBJECT-TYPE SYNTAX INTEGER { dte(0), dce(128) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState." DEFVAL { dte } ::= { mscLpX21ProvEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.2 | mscLpX21ReadyLineState | 0 | 0 | This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interf… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.3 | mscLpX21DataTransferLineState | 0 | 0 | The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can pr… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.4 | mscLpX21LineStatusTimeOut | 0 | 0 | This attribute defines the time the line state must be stable (good or bad) before a state change is declared. |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.5 | mscLpX21LineSpeed | 0 | 0 | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a … |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.6 | mscLpX21ClockingSource | 0 | 0 | This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.7 | mscLpX21DteDataClockSource | 0 | 0 | This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive … |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.8 | mscLpX21LineTerminationRequired | 0 | 0 | This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.9 | mscLpX21ApplicationFramerName | 0 | 0 | This attribute contains the component name of a Framer which is associated with the X21 component. |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.10 | mscLpX21EnableDynamicSpeed | 0 | 0 | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This… |