This attribute displays whether a Line Remote Failure Indication
(LRFI) alarm state has been entered. An L-RFI alarm state is
entered when Line Remote Failure Indication (L-RDI) defects have
been observed and accumulated for a period of 2.5 seconds +/- 0.5
seconds. The L-RDI defect is the occurrence of the L-RDI signal in
five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and
8 of the K2 bytes). If the L-RDI defects are intermittently occurring,
the L-RDI defect accumulator is decremented at a rate of 1/10 of
the incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the L-RFI alarm condition is cleared. The condition is cleared
after not detecting the L-RDI signal for a period of 10 seconds +/-
0.5 seconds.
The rxRfiAlarm attribute is always set to off when the component
has been locked and left offline.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute displays whether a Line Remote Failure Indication
(LRFI) alarm state has been entered. An L-RFI alarm state is
entered when Line Remote Failure Indication (L-RDI) defects have
been observed and accumulated for a period of 2.5 seconds +/- 0.5
seconds. The L-RDI defect is the occurrence of the L-RDI signal in
five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and
8 of the K2 bytes). If the L-RDI defects are intermittently occurring,
the L-RDI defect accumulator is decremented at a rate of 1/10 of
the incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The Sonet/Sdh component goes into an operational state of disabled
until the L-RFI alarm condition is cleared. The condition is cleared
after not detecting the L-RDI signal for a period of 10 seconds +/-
0.5 seconds.
The rxRfiAlarm attribute is always set to off when the component
has been locked and left offline.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpSonetRxRfiAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline." ::= { mscLpSonetOperEntry 4 }
mscLpSonetRxRfiAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline." ::= { mscLpSonetOperEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.1 | mscLpSonetLosAlarm | 0 | 0 | This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS def… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.2 | mscLpSonetLofAlarm | 0 | 0 | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defec… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.3 | mscLpSonetRxAisAlarm | 0 | 0 | This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is en… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.5 | mscLpSonetTxAis | 0 | 0 | This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.6 | mscLpSonetTxRdi | 0 | 0 | This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-R… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.7 | mscLpSonetUnusableTxClockRefAlarm | 0 | 0 | This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is e… |