This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute
portCongestionPolicy.
This attribute specifies whether port aggregation is turned on or off
for this ATM-FP. It applies only to transmit traffic served on the
common queues and does not apply to perVc queues.
When port aggregation is on, the enqueue decision of cells or
frames to a common queue is based upon the congestion state of the
entire port to which the queue belongs. A port is defined to be as
congested as the most congested queue amongst all its queues: the
low, medium and high emission priority queues. Thus, for example,
if the low priority queue is congested, the high priority queue will
also experience discards even though the high priority queue may
itself not be congested. Setting port aggregation on assures that the
low priority queues are also serviced in the event of congestion.
When the value of this attribute is set to off, the enqueue decision of
cells or frames to a common queue is based solely upon the
congestion state of that queue, not the port. This setting assures that
the absolute priority of the traffic is taken into account, regardless of
whether or not the lower priority queues are being served.
Parsed from file nortelPC-atmBaseV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute
portCongestionPolicy.
This attribute specifies whether port aggregation is turned on or off
for this ATM-FP. It applies only to transmit traffic served on the
common queues and does not apply to perVc queues.
When port aggregation is on, the enqueue decision of cells or
frames to a common queue is based upon the congestion state of the
entire port to which the queue belongs. A port is defined to be as
congested as the most congested queue amongst all its queues: the
low, medium and high emission priority queues. Thus, for example,
if the low priority queue is congested, the high priority queue will
also experience discards even though the high priority queue may
itself not be congested. Setting port aggregation on assures that the
low priority queues are also serviced in the event of congestion.
When the value of this attribute is set to off, the enqueue decision of
cells or frames to a common queue is based solely upon the
congestion state of that queue, not the port. This setting assures that
the absolute priority of the traffic is taken into account, regardless of
whether or not the lower priority queues are being served.
Parsed from file Nortel-MsCarrier-MscPassport-AtmBaseMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
[Automatically extracted from oidview.com]
mscLpArcPortAggregation OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute portCongestionPolicy. This attribute specifies whether port aggregation is turned on or off for this ATM-FP. It applies only to transmit traffic served on the common queues and does not apply to perVc queues. When port aggregation is on, the enqueue decision of cells or frames to a common queue is based upon the congestion state of the entire port to which the queue belongs. A port is defined to be as congested as the most congested queue amongst all its queues: the low, medium and high emission priority queues. Thus, for example, if the low priority queue is congested, the high priority queue will also experience discards even though the high priority queue may itself not be congested. Setting port aggregation on assures that the low priority queues are also serviced in the event of congestion. When the value of this attribute is set to off, the enqueue decision of cells or frames to a common queue is based solely upon the congestion state of that queue, not the port. This setting assures that the absolute priority of the traffic is taken into account, regardless of whether or not the lower priority queues are being served." DEFVAL { on } ::= { mscLpArcProvEntry 42 }
mscLpArcPortAggregation OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute portCongestionPolicy. This attribute specifies whether port aggregation is turned on or off for this ATM-FP. It applies only to transmit traffic served on the common queues and does not apply to perVc queues. When port aggregation is on, the enqueue decision of cells or frames to a common queue is based upon the congestion state of the entire port to which the queue belongs. A port is defined to be as congested as the most congested queue amongst all its queues: the low, medium and high emission priority queues. Thus, for example, if the low priority queue is congested, the high priority queue will also experience discards even though the high priority queue may itself not be congested. Setting port aggregation on assures that the low priority queues are also serviced in the event of congestion. When the value of this attribute is set to off, the enqueue decision of cells or frames to a common queue is based solely upon the congestion state of that queue, not the port. This setting assures that the absolute priority of the traffic is taken into account, regardless of whether or not the lower priority queues are being served." DEFVAL { on } ::= { mscLpArcProvEntry 42 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.5 | mscLpArcTotalConnectionPoolCapacity | 0 | 0 | This attribute is migrated to the Lp/n Eng Arc Ov attribute of the same name. This attribute specifies the maximum number of con… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.6 | mscLpArcMulticastBranchesCapacity | 0 | 0 | This attribute is migrated to the Lp/n Eng Arc Ov attribute of the same name. This attribute specifies the number of multicast b… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.10 | mscLpArcTxFrameMemoryAllocation | 0 | 0 | This attribute is migrated to the Lp/n Eng Arc Ov attribute txCellMemoryAllocation. It is converted from frame percentage to cell… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.20 | mscLpArcRxFrameMemoryAllocation | 0 | 0 | This attribute is migrated to the Lp/n Eng Arc Ov attribute rxCellMemoryAllocation. It is converted from frame percentage to cell… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.25 | mscLpArcPerVcQueueInterfaces | 0 | 0 | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute specifies the number of indepen… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.30 | mscLpArcShapingStackAllocation | 0 | 0 | This attribute is migrated to the perVcQueueInterfaces attribute of the Lp/n Eng Arc Cqc Ov. Value ~0,~1,~2 is migrated to the v… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.40 | mscLpArcShapingScalingFactor | 0 | 0 | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute specifies the scaling factor wh… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.41 | mscLpArcCdvAttenuation | 0 | 0 | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute cdvReduction. This attribute enables the attenuation of the maxi… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.43 | mscLpArcSubConnectionPoolCapacity | 0 | 0 | This attribute is migrated to the Lp/n Eng Fcrc Ov attribute of the same name. This attribute specifies the maximum number of su… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.44 | mscLpArcLnnConnectionPoolCapacity | 0 | 0 | This attribute is migrated to the Lp/n Eng Fcrc Ov attribute of the same name. This attribute specifies the maximum number of re… |