This attribute specifies the transmit clocking mode.
If itc (Independent Transmit Clock) is chosen, the physical ports
used by the IMA group may have different clocking sources.
If ctc (Common Transmit Clock) is chosen, it is recommended that
the physical ports used by the IMA group have the same clocking
source. However, if the physical ports have different clocking
sources, the operator should ensure that all the clocking sources
have the same rate.
Parsed from file nortelPC-imaV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-ImaMIB
This attribute specifies the transmit clocking mode.
If itc (Independent Transmit Clock) is chosen, the physical ports
used by the IMA group may have different clocking sources.
If ctc (Common Transmit Clock) is chosen, it is recommended that
the physical ports used by the IMA group have the same clocking
source. However, if the physical ports have different clocking
sources, the operator should ensure that all the clocking sources
have the same rate.
Parsed from file Nortel-MsCarrier-MscPassport-ImaMIB.mib
Module: Nortel-MsCarrier-MscPassport-ImaMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-ImaMIB
[Automatically extracted from oidview.com]
mscLpImaTransmitClockMode OBJECT-TYPE SYNTAX INTEGER { itc(0), ctc(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the transmit clocking mode. If itc (Independent Transmit Clock) is chosen, the physical ports used by the IMA group may have different clocking sources. If ctc (Common Transmit Clock) is chosen, it is recommended that the physical ports used by the IMA group have the same clocking source. However, if the physical ports have different clocking sources, the operator should ensure that all the clocking sources have the same rate." DEFVAL { itc } ::= { mscLpImaProvEntry 5 }
mscLpImaTransmitClockMode OBJECT-TYPE SYNTAX INTEGER { itc(0), ctc(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the transmit clocking mode. If itc (Independent Transmit Clock) is chosen, the physical ports used by the IMA group may have different clocking sources. If ctc (Common Transmit Clock) is chosen, it is recommended that the physical ports used by the IMA group have the same clocking source. However, if the physical ports have different clocking sources, the operator should ensure that all the clocking sources have the same rate." DEFVAL { itc } ::= { mscLpImaProvEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.22.10.1.1 | mscLpImaLinkSelectionCriterion | 0 | 0 | This attribute specifies the method to be used by the IMA group when selecting links to be activated. This comes into effect onl… |
| 1.3.6.1.4.1.562.36.2.1.12.22.10.1.2 | mscLpImaMaxDiffDelay | 0 | 0 | This attribute specifies the maximum differential delay between links acceptable in the IMA group. If a link violates that maxim… |
| 1.3.6.1.4.1.562.36.2.1.12.22.10.1.3 | mscLpImaLinkRetryTimeout | 0 | 0 | This attribute specifies the amount of time before reactivation of a link is attempted after it recovers from a failure conditio… |
| 1.3.6.1.4.1.562.36.2.1.12.22.10.1.4 | mscLpImaApplicationFramerName | 0 | 0 | This attribute defines the link to the AtmIf component using the Ima. An example is AtmIf/31. |
| 1.3.6.1.4.1.562.36.2.1.12.22.10.1.6 | mscLpImaProtocol | 0 | 0 | This attribute specifies what protocol the component should run. If atmForum10 is chosen, the ATM Forum's IMA protocol (version 1… |