This attribute specifies the fraction of the transmit memory which
should be allocated to the transmission of cells on an FP. The
remaining memory is allocated for the transmission of frames.
Frame memory is used for trunks, ATM VCC testing and for inter-
card communication. Cell memory is used for Atm Bearer Service,
ATM SVCs and ATM PVCs.
There is an absolute minimum quantity of frame buffers which is
required by ATM software on the FP. If the value of this attribute is
smaller than the absolute minimum, the ATM software allocates the
minimum required, rather than the actual number requested.
The actual percentage of the transmit memory allocated to the
transmit cell memory is indicated by the Arc
txCellMemoryAllocation attribute. A difference between the
provisioned and the operational values may exist due to the
requirement for a minimum number of frame buffers or rounding
during computation within the FP.
Parsed from file nortelPC-atmBaseV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
This attribute specifies the fraction of the transmit memory which
should be allocated to the transmission of cells on an FP. The
remaining memory is allocated for the transmission of frames.
Frame memory is used for trunks, ATM VCC testing and for inter-
card communication. Cell memory is used for Atm Bearer Service,
ATM SVCs and ATM PVCs.
There is an absolute minimum quantity of frame buffers which is
required by ATM software on the FP. If the value of this attribute is
smaller than the absolute minimum, the ATM software allocates the
minimum required, rather than the actual number requested.
The actual percentage of the transmit memory allocated to the
transmit cell memory is indicated by the Arc
txCellMemoryAllocation attribute. A difference between the
provisioned and the operational values may exist due to the
requirement for a minimum number of frame buffers or rounding
during computation within the FP.
Parsed from file Nortel-MsCarrier-MscPassport-AtmBaseMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
[Automatically extracted from oidview.com]
mscLpEngArcOvTxCellMemoryAllocation OBJECT-TYPE SYNTAX Unsigned32 (1..99) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the fraction of the transmit memory which should be allocated to the transmission of cells on an FP. The remaining memory is allocated for the transmission of frames. Frame memory is used for trunks, ATM VCC testing and for inter- card communication. Cell memory is used for Atm Bearer Service, ATM SVCs and ATM PVCs. There is an absolute minimum quantity of frame buffers which is required by ATM software on the FP. If the value of this attribute is smaller than the absolute minimum, the ATM software allocates the minimum required, rather than the actual number requested. The actual percentage of the transmit memory allocated to the transmit cell memory is indicated by the Arc txCellMemoryAllocation attribute. A difference between the provisioned and the operational values may exist due to the requirement for a minimum number of frame buffers or rounding during computation within the FP." DEFVAL { 50 } ::= { mscLpEngArcOvProvEntry 3 }
mscLpEngArcOvTxCellMemoryAllocation OBJECT-TYPE SYNTAX Unsigned32 (1..99) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the fraction of the transmit memory which should be allocated to the transmission of cells on an FP. The remaining memory is allocated for the transmission of frames. Frame memory is used for trunks, ATM VCC testing and for inter- card communication. Cell memory is used for Atm Bearer Service, ATM SVCs and ATM PVCs. There is an absolute minimum quantity of frame buffers which is required by ATM software on the FP. If the value of this attribute is smaller than the absolute minimum, the ATM software allocates the minimum required, rather than the actual number requested. The actual percentage of the transmit memory allocated to the transmit cell memory is indicated by the Arc txCellMemoryAllocation attribute. A difference between the provisioned and the operational values may exist due to the requirement for a minimum number of frame buffers or rounding during computation within the FP." DEFVAL { 50 } ::= { mscLpEngArcOvProvEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.1 | mscLpEngArcOvTotalConnectionPoolCapacity | 0 | 0 | This attribute specifies the maximum number of connections (VCC, VPC and VPT) that can be enabled on this FP.A standard Vpt uses… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.2 | mscLpEngArcOvMulticastBranchesCapacity | 0 | 0 | This attribute specifies the number of multicast branches that can be enabled on this FP. A multicast branch is used for cell re… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.4 | mscLpEngArcOvRxCellMemoryAllocation | 0 | 0 | This attribute specifies the fraction of the receive memory which should be allocated to the reception of cells on an FP. The re… |