This attribute is provided for backward compatibility and can only
be used if the LogicalProcessor is associated with a card of one of
the following cardType: 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm,
3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm. This attribute
can be used when the desired distribution of connections across
ports cannot be achieved using the totalConnectionPoolCapacity
attribute.
This attribute defines the maximum number of connections (VCC,
VPC and VPT) that are available on each port. A basic Vpt uses 2
connections. The entries are indexed by port number. This number
limits the range of the ConnMap entries. If the Connmap
component does not exist, its default settings are used for this
check. Note that the value of this attribute must be evenly divisible
by 256, and that port 2 supports at most 2560 connections, not the
full 4096.
The connection pool for each port must be set to 0 if the
totalConnectionPoolCapacity attribute is set to a non-zero value.
Parsed from file nortelPC-atmBaseV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
This attribute is provided for backward compatibility and can only
be used if the LogicalProcessor is associated with a card of one of
the following cardType: 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm,
3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm. This attribute
can be used when the desired distribution of connections across
ports cannot be achieved using the totalConnectionPoolCapacity
attribute.
This attribute defines the maximum number of connections (VCC,
VPC and VPT) that are available on each port. A basic Vpt uses 2
connections. The entries are indexed by port number. This number
limits the range of the ConnMap entries. If the Connmap
component does not exist, its default settings are used for this
check. Note that the value of this attribute must be evenly divisible
by 256, and that port 2 supports at most 2560 connections, not the
full 4096.
The connection pool for each port must be set to 0 if the
totalConnectionPoolCapacity attribute is set to a non-zero value.
Parsed from file Nortel-MsCarrier-MscPassport-AtmBaseMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmBaseMIB
[Automatically extracted from oidview.com]
mscLpEngArcCqcOvConnCapTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEngArcCqcOvConnCapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is provided for backward compatibility and can only be used if the LogicalProcessor is associated with a card of one of the following cardType: 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm. This attribute can be used when the desired distribution of connections across ports cannot be achieved using the totalConnectionPoolCapacity attribute. This attribute defines the maximum number of connections (VCC, VPC and VPT) that are available on each port. A basic Vpt uses 2 connections. The entries are indexed by port number. This number limits the range of the ConnMap entries. If the Connmap component does not exist, its default settings are used for this check. Note that the value of this attribute must be evenly divisible by 256, and that port 2 supports at most 2560 connections, not the full 4096. The connection pool for each port must be set to 0 if the totalConnectionPoolCapacity attribute is set to a non-zero value." ::= { mscLpEngArcCqcOv 450 }
mscLpEngArcCqcOvConnCapTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEngArcCqcOvConnCapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is provided for backward compatibility and can only be used if the LogicalProcessor is associated with a card of one of the following cardType: 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm. This attribute can be used when the desired distribution of connections across ports cannot be achieved using the totalConnectionPoolCapacity attribute. This attribute defines the maximum number of connections (VCC, VPC and VPT) that are available on each port. A basic Vpt uses 2 connections. The entries are indexed by port number. This number limits the range of the ConnMap entries. If the Connmap component does not exist, its default settings are used for this check. Note that the value of this attribute must be evenly divisible by 256, and that port 2 supports at most 2560 connections, not the full 4096. The connection pool for each port must be set to 0 if the totalConnectionPoolCapacity attribute is set to a non-zero value." ::= { mscLpEngArcCqcOv 450 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.450.1 | mscLpEngArcCqcOvConnCapEntry | 2 | 2 | An entry in the mscLpEngArcCqcOvConnCapTable. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.1 | mscLpEngArcCqcOvRowStatusTable | 1 | 5 | This entry controls the addition and deletion of mscLpEngArcCqcOv components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.10 | mscLpEngArcCqcOvProvTable | 1 | 5 | This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services. Not… |