The frame too long counter indicates the number of frames received
which exceeded the maximum frame size. This counter wraps around
after it exceeds its maximum value.
Parsed from file nortelPC-lanDriversV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LanDriversMIB
The frame too long counter indicates the number of frames received
which exceeded the maximum frame size. This counter wraps around
after it exceeds its maximum value.
Parsed from file Nortel-MsCarrier-MscPassport-LanDriversMIB.mib
Module: Nortel-MsCarrier-MscPassport-LanDriversMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LanDriversMIB
[Automatically extracted from oidview.com]
mscLpEth100FrameTooLongs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The frame too long counter indicates the number of frames received which exceeded the maximum frame size. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 12 }
mscLpEth100FrameTooLongs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The frame too long counter indicates the number of frames received which exceeded the maximum frame size. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.2 | mscLpEth100AlignmentErrors | 0 | 0 | The alignmentErrors counter indicates the number of frames received which were not an integral number of octets in length. Frame… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.3 | mscLpEth100FcsErrors | 0 | 0 | The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the number of frames received which were an integral number o… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.4 | mscLpEth100SingleCollisionFrames | 0 | 0 | The singleCollisionFrames counter indicates the number of frames successfully transmitted which experienced exactly one collisio… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.5 | mscLpEth100MultipleCollisionFrames | 0 | 0 | The multipleCollisionFrames counter indicates the number of frames successfully transmitted which experienced more than one coll… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.6 | mscLpEth100SqeTestErrors | 0 | 0 | The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter indicates the number of times the 'SQE Test Error' message ha… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.7 | mscLpEth100DeferredTransmissions | 0 | 0 | The deferredTransmissions counter indicates the number of frames which experienced a transmission delay because the medium was b… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.8 | mscLpEth100LateCollisions | 0 | 0 | The lateCollisions counter indicates the number of times a collision was detected later than 512 bit-times into the transmission… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.9 | mscLpEth100ExcessiveCollisions | 0 | 0 | The excessiveCollisions counter indicates the number of frames which failed to get transmitted due to excessive collisions. This… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.10 | mscLpEth100MacTransmitErrors | 0 | 0 | The Medium Access Controller (MAC) transmit error counter indicates the number of times that a transmission failed due to intern… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.11 | mscLpEth100CarrierSenseErrors | 0 | 0 | The carrier sense error counter indicates the number of times that the carrier sense condition was lost or never asserted when a… |
| 1.3.6.1.4.1.562.36.2.1.12.25.19.1.13 | mscLpEth100MacReceiveErrors | 0 | 0 | The Medium Access Controller (MAC) receive error counter indicates the number of times a receive failed due to internal MAC rece… |