The useThruBa attribute is used to configure the requested path of the
associated station. If enabled, only the secondary preferred path is
permitted. If disabled, only the primary preferred path is permitted.
Parsed from file nortelPC-lanDriversV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LanDriversMIB
The useThruBa attribute is used to configure the requested path of the
associated station. If enabled, only the secondary preferred path is
permitted. If disabled, only the primary preferred path is permitted.
Parsed from file Nortel-MsCarrier-MscPassport-LanDriversMIB.mib
Module: Nortel-MsCarrier-MscPassport-LanDriversMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LanDriversMIB
[Automatically extracted from oidview.com]
mscLpFiUseThruBa OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The useThruBa attribute is used to configure the requested path of the associated station. If enabled, only the secondary preferred path is permitted. If disabled, only the primary preferred path is permitted." DEFVAL { disabled } ::= { mscLpFiSmtProvEntry 8 }
mscLpFiUseThruBa OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The useThruBa attribute is used to configure the requested path of the associated station. If enabled, only the secondary preferred path is permitted. If disabled, only the primary preferred path is permitted." DEFVAL { disabled } ::= { mscLpFiSmtProvEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.1 | mscLpFiUserData | 0 | 0 | The user data field is used to identify the FDDI interface on the ring. The user data contains a message with a maximum of 32 ch… |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.2 | mscLpFiAcceptAa | 0 | 0 | The acceptAa attribute defines the station type A to station type A connection policy. If enabled, the connection will be accept… |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.3 | mscLpFiAcceptBb | 0 | 0 | The acceptBb attribute defines the station type B to station type B connection policy. If enabled, the connection will be accept… |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.4 | mscLpFiAcceptAs | 0 | 0 | The acceptAs attribute defines the station type A to station type S connection policy. If enabled, the connection will be accept… |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.5 | mscLpFiAcceptBs | 0 | 0 | The acceptBs attribute defines the station type B to station type S connection policy. If enabled, the connection will be accept… |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.6 | mscLpFiAcceptAm | 0 | 0 | The acceptAm attribute defines the station type A to station type M connection policy. If enabled, the connection will be accept… |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.7 | mscLpFiAcceptBm | 0 | 0 | The acceptBm attribute defines the station type B to station type M connection policy. If enabled, the connection will be accept… |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.10 | mscLpFiNeighborNotifyInterval | 0 | 0 | The neighborNotifyInterval attribute contains the amount of time, expressed in seconds, between neighbor notification frames. |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.11 | mscLpFiStatusReportPolicy | 0 | 0 | The statusReportPolicy attribute indicates whether or not the station will generate status reporting frames for its implemented … |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.12 | mscLpFiTraceMaxExpirationTimer | 0 | 0 | The traceMaxExpirationTimer attribute is used to configure the maximum propagation time, expressed in milliseconds, for a trace … |
| 1.3.6.1.4.1.562.36.2.1.12.4.12.1.13 | mscLpFiApplicationFramerName | 0 | 0 | This attribute contains the component name of a Framer which is associated with the Fddi component. This defines which LanApplica… |