This attribute displays whether the Unexpected Payload Type (UPT)
alarm state has been entered. The UPT alarm state is entered when
UPT defects have been observed and accumulated for a period of
2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a
received frame fails to agree with the expected Payload Type. If the
UPT defects are intermittently occurring, the UPT defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle..
The UPT alarm is cleared when the Payload Type in the received
frame agrees with the expected Payload Type for a period of 10
seconds +/- 0.5 seconds.
The unexpectedPayloadType attribute is always set to off when the
E3 component has been locked and left offline.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute displays whether the Unexpected Payload Type (UPT)
alarm state has been entered. The UPT alarm state is entered when
UPT defects have been observed and accumulated for a period of
2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a
received frame fails to agree with the expected Payload Type. If the
UPT defects are intermittently occurring, the UPT defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle..
The UPT alarm is cleared when the Payload Type in the received
frame agrees with the expected Payload Type for a period of 10
seconds +/- 0.5 seconds.
The unexpectedPayloadType attribute is always set to off when the
E3 component has been locked and left offline.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpE3G832UnexpectedPayloadType OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline." ::= { mscLpE3G832OperationalEntry 1 }
mscLpE3G832UnexpectedPayloadType OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline." ::= { mscLpE3G832OperationalEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.2 | mscLpE3G832TrailTraceMismatch | 0 | 0 | This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.3 | mscLpE3G832TimingMarker | 0 | 0 | Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indica… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.4 | mscLpE3G832TrailTraceReceived | 0 | 0 | This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G83… |