This attribute defines the zero encoding on the DS1 line.
bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's
density. This reduces the available bandwidth of the channel by 1/8.
b8zs substitutes a pattern of bipolar violations if more than 7 zeros
in a row are to be transported.
ami specifies Alternate Mark Inversion, in which successive marks
(ones) alternate between positive and negative polarity voltage
signals, and spaces (zeros) are sent as a zero amplitude signal.
When zeroCoding is set to ami and lineType is set to d4, it is
recommended that raiAlarmType be set to SBit in order to avoid
possible mimic RAI alarm.
For cell-based cards only the default value b8zs is permitted.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute defines the zero encoding on the DS1 line.
bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's
density. This reduces the available bandwidth of the channel by 1/8.
b8zs substitutes a pattern of bipolar violations if more than 7 zeros
in a row are to be transported.
ami specifies Alternate Mark Inversion, in which successive marks
(ones) alternate between positive and negative polarity voltage
signals, and spaces (zeros) are sent as a zero amplitude signal.
When zeroCoding is set to ami and lineType is set to d4, it is
recommended that raiAlarmType be set to SBit in order to avoid
possible mimic RAI alarm.
For cell-based cards only the default value b8zs is permitted.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpDS1ZeroCoding OBJECT-TYPE SYNTAX INTEGER { bit7Stuffing(0), b8zs(1), ami(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted." DEFVAL { b8zs } ::= { mscLpDS1ProvEntry 2 }
mscLpDS1ZeroCoding OBJECT-TYPE SYNTAX INTEGER { bit7Stuffing(0), b8zs(1), ami(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted." DEFVAL { b8zs } ::= { mscLpDS1ProvEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1.1 | mscLpDS1LineType | 0 | 0 | This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a frami… |
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1.3 | mscLpDS1ClockingSource | 0 | 0 | This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port genera… |
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1.4 | mscLpDS1RaiAlarmType | 0 | 0 | This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alar… |
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1.5 | mscLpDS1LineLength | 0 | 0 | This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655.… |