This attribute defines the source of the transmit clock for the E1
line.
When local is selected, the crystal on the port generates the
clocking for the line.
When line is selected, the port synchronizes to the clock from the
facility.
When module is selected, the ports clock synchronizes to the clock
provided by the oscillator on the active CP.
When otherPort is selected, the port synchronizes to the port with a
clocking source of line.
When srtsMode is selected, the port transmit frequency depends on
the SRTS (Synchronous Residual Time-Stamp) received over the
ATM network. SRTS information is also generated sent over the
ATM network.
When adaptiveMode is selected, the port transmit frequency
continually adapts to match the egress data received from the ATM
network.
A port with srtsMode or adaptiveMode must have a single Chan
which may be linked only to an Aal1Ces.service with serviceType
unstructured
If the NetworkSynchronization component is present, the default
value of this attribute is module, otherwise it defaults to line, except
for the 3pE1Atm card, which it defaults to local.
On a 3pE1Atm card all ports must have the same value, and be
either local or module.
otherPort is valid only on AAL1 cards. srtsMode is valid only on
AAL1 and Multi-Service Access cards. adaptiveMode is valid only
on Multi-Service Access cards.
On 4E1Aal1 cards either:
all four ports' clockingSource values must be local OR
all four ports' clockingSource values must be module OR
one port's clockingSource value must be line and the other three
must be otherPort. A port can only have srtsMode selected if the
other ports are module or srtsMode.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute defines the source of the transmit clock for the E1
line.
When local is selected, the crystal on the port generates the
clocking for the line.
When line is selected, the port synchronizes to the clock from the
facility.
When module is selected, the ports clock synchronizes to the clock
provided by the oscillator on the active CP.
When otherPort is selected, the port synchronizes to the port with a
clocking source of line.
When srtsMode is selected, the port transmit frequency depends on
the SRTS (Synchronous Residual Time-Stamp) received over the
ATM network. SRTS information is also generated sent over the
ATM network.
When adaptiveMode is selected, the port transmit frequency
continually adapts to match the egress data received from the ATM
network.
A port with srtsMode or adaptiveMode must have a single Chan
which may be linked only to an Aal1Ces.service with serviceType
unstructured
If the NetworkSynchronization component is present, the default
value of this attribute is module, otherwise it defaults to line, except
for the 3pE1Atm card, which it defaults to local.
On a 3pE1Atm card all ports must have the same value, and be
either local or module.
otherPort is valid only on AAL1 cards. srtsMode is valid only on
AAL1 and Multi-Service Access cards. adaptiveMode is valid only
on Multi-Service Access cards.
On 4E1Aal1 cards either:
all four ports' clockingSource values must be local OR
all four ports' clockingSource values must be module OR
one port's clockingSource value must be line and the other three
must be otherPort. A port can only have srtsMode selected if the
other ports are module or srtsMode.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpE1ClockingSource OBJECT-TYPE SYNTAX INTEGER { local(0), line(1), module(2), otherPort(3), srtsMode(4), adaptiveMode(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pE1Atm card, which it defaults to local. On a 3pE1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4E1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode." ::= { mscLpE1ProvEntry 2 }
mscLpE1ClockingSource OBJECT-TYPE SYNTAX INTEGER { local(0), line(1), module(2), otherPort(3), srtsMode(4), adaptiveMode(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pE1Atm card, which it defaults to local. On a 3pE1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4E1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode." ::= { mscLpE1ProvEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.1 | mscLpE1LineType | 0 | 0 | This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserve… |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.3 | mscLpE1Crc4Mode | 0 | 0 | This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode i… |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.4 | mscLpE1SendRaiOnAis | 0 | 0 | This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by def… |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.5 | mscLpE1RaiDeclareAlarmTime | 0 | 0 | This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. T… |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.6 | mscLpE1RaiClearAlarmTime | 0 | 0 | This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. Th… |