This attribute displays whether an RAI (Remote Alarm Indication)
alarm state has been entered. An RAI alarm state is entered when
the RAI defect indicator has been observed and accumulated for 3.5
seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards:
alarm is declared immediately upon observing the defect is present,
with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm
state is entered when the RAI defect indicator has been observed
and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects
are intermittently occurring, the RAI defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The RAI alarm state is cleared when the RAI defect indicator has
been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and
8pDS1Atm cards: alarm is cleared immediately upon observing the
defect is absent, with no integration time).
The RAI alarm is usually an indication that the far end facility is
unable to gain synchronization.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute displays whether an RAI (Remote Alarm Indication)
alarm state has been entered. An RAI alarm state is entered when
the RAI defect indicator has been observed and accumulated for 3.5
seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards:
alarm is declared immediately upon observing the defect is present,
with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm
state is entered when the RAI defect indicator has been observed
and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects
are intermittently occurring, the RAI defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The RAI alarm state is cleared when the RAI defect indicator has
been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and
8pDS1Atm cards: alarm is cleared immediately upon observing the
defect is absent, with no integration time).
The RAI alarm is usually an indication that the far end facility is
unable to gain synchronization.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpE1RxRaiAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization." DEFVAL { off } ::= { mscLpE1OperEntry 4 }
mscLpE1RxRaiAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization." DEFVAL { off } ::= { mscLpE1OperEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.1 | mscLpE1LosAlarm | 0 | 0 | This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects h… |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.2 | mscLpE1RxAisAlarm | 0 | 0 | This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered wh… |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.3 | mscLpE1LofAlarm | 0 | 0 | This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defe… |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.5 | mscLpE1TxAisAlarm | 0 | 0 | This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmi… |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.6 | mscLpE1TxRaiAlarm | 0 | 0 | This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port det… |