Reference record for OID 1.3.6.1.4.1.562.36.2.1.12.8.17.1.2



parent
1.3.6.1.4.1.562.36.2.1.12.8.17.1 (mscLpE1E1OperEntry)
node code
2
node name
mscLpE1RxMultifrmRaiAlarm
dot oid
1.3.6.1.4.1.562.36.2.1.12.8.17.1.2
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nortel(562) msCarrier(36) mscPassport(2) mscComponents(1) mscLp(12) mscLpE1(8) mscLpE1E1OperTable(17) mscLpE1E1OperEntry(1) mscLpE1RxMultifrmRaiAlarm(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) northernTelecom(562) msCarrier(36) mscPassport(2) mscComponents(1) mscLp(12) mscLpE1(8) mscLpE1E1OperTable(17) mscLpE1E1OperEntry(1) mscLpE1RxMultifrmRaiAlarm(2)}
  • ...skipped...
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) northernTelecom(562) msCarrier(36) mscPassport(2) mscComponents(1) mscLp(12) mscLpE1(8) mscLpE1E1OperTable(17) mscLpE1E1OperEntry(1) mscLpE1RxMultifrmRaiAlarm(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nt(562) msCarrier(36) mscPassport(2) mscComponents(1) mscLp(12) mscLpE1(8) mscLpE1E1OperTable(17) mscLpE1E1OperEntry(1) mscLpE1RxMultifrmRaiAlarm(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nortel(562) msCarrier(36) mscPassport(2) mscComponents(1) mscLp(12) mscLpE1(8) mscLpE1E1OperTable(17) mscLpE1E1OperEntry(1) mscLpE1RxMultifrmRaiAlarm(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) northernTelecom(562) msCarrier(36) mscPassport(2) mscComponents(1) mscLp(12) mscLpE1(8) mscLpE1E1OperTable(17) mscLpE1E1OperEntry(1) mscLpE1RxMultifrmRaiAlarm(2)}
  • ...skipped...
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) northernTelecom(562) msCarrier(36) mscPassport(2) mscComponents(1) mscLp(12) mscLpE1(8) mscLpE1E1OperTable(17) mscLpE1E1OperEntry(1) mscLpE1RxMultifrmRaiAlarm(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nt(562) msCarrier(36) mscPassport(2) mscComponents(1) mscLp(12) mscLpE1(8) mscLpE1E1OperTable(17) mscLpE1E1OperEntry(1) mscLpE1RxMultifrmRaiAlarm(2)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/nortel/msCarrier/mscPassport/mscComponents/mscLp/mscLpE1/mscLpE1E1OperTable/mscLpE1E1OperEntry/mscLpE1RxMultifrmRaiAlarm
  • /iso/identified-organization/dod/internet/private/enterprise/northernTelecom/msCarrier/mscPassport/mscComponents/mscLp/mscLpE1/mscLpE1E1OperTable/mscLpE1E1OperEntry/mscLpE1RxMultifrmRaiAlarm
  • ...skipped...
  • /iso/org/dod/internet/private/enterprise/northernTelecom/msCarrier/mscPassport/mscComponents/mscLp/mscLpE1/mscLpE1E1OperTable/mscLpE1E1OperEntry/mscLpE1RxMultifrmRaiAlarm
  • /iso/org/dod/internet/private/enterprise/nt/msCarrier/mscPassport/mscComponents/mscLp/mscLpE1/mscLpE1E1OperTable/mscLpE1E1OperEntry/mscLpE1RxMultifrmRaiAlarm
  • /iso/org/dod/internet/private/enterprises/nortel/msCarrier/mscPassport/mscComponents/mscLp/mscLpE1/mscLpE1E1OperTable/mscLpE1E1OperEntry/mscLpE1RxMultifrmRaiAlarm
  • /iso/org/dod/internet/private/enterprises/northernTelecom/msCarrier/mscPassport/mscComponents/mscLp/mscLpE1/mscLpE1E1OperTable/mscLpE1E1OperEntry/mscLpE1RxMultifrmRaiAlarm
  • ...skipped...
  • /iso/iso-identified-organization/dod/internet/private/enterprises/northernTelecom/msCarrier/mscPassport/mscComponents/mscLp/mscLpE1/mscLpE1E1OperTable/mscLpE1E1OperEntry/mscLpE1RxMultifrmRaiAlarm
  • /iso/iso-identified-organization/dod/internet/private/enterprises/nt/msCarrier/mscPassport/mscComponents/mscLp/mscLpE1/mscLpE1E1OperTable/mscLpE1E1OperEntry/mscLpE1RxMultifrmRaiAlarm
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/562/36/2/1/12/8/17/1/2

    Description by mibdepot

    This attribute displays whether a multiframe RAI (remote alarm
    indicator) alarm state has been entered. A multiframe RAI alarm
    state is entered when a multiframe RAI alarm indicator (bit 6 of
    timeslot 16 in frame 0 is set to a one) is observed and accumulated
    for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is
    intermittently received, the multiframe RAI defect accumulator is
    decremented at a rate of 1/10 of the incrementing rate (alarm
    integration ratio of 1/10), with all measurements based on a 200 ms
    polling cycle.
    The multiframe RAI alarm condition is cleared when the
    multiframe RAI alarm indication is not received for 10 seconds +/-
    0.5 seconds. The multiframe RAI alarm is usually an indication that
    the far end facility is unable to gain multiframe synchronization.

    The 8pE1Atm card does not support the multiframe RAI alarm.

    Parsed from file nortelPC-logicalProcessorV1.mib.txt
    Company: None
    Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB

    Description by circitor

    This attribute displays whether a multiframe RAI (remote alarm
    indicator) alarm state has been entered. A multiframe RAI alarm
    state is entered when a multiframe RAI alarm indicator (bit 6 of
    timeslot 16 in frame 0 is set to a one) is observed and accumulated
    for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is
    intermittently received, the multiframe RAI defect accumulator is
    decremented at a rate of 1/10 of the incrementing rate (alarm
    integration ratio of 1/10), with all measurements based on a 200 ms
    polling cycle.
    The multiframe RAI alarm condition is cleared when the
    multiframe RAI alarm indication is not received for 10 seconds +/-
    0.5 seconds. The multiframe RAI alarm is usually an indication that
    the far end facility is unable to gain multiframe synchronization.

    The 8pE1Atm card does not support the multiframe RAI alarm.

    Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
    Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB

    Information by oid_info

    Vendor: Northern Telecom, Ltd.
    Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    mscLpE1RxMultifrmRaiAlarm OBJECT-TYPE
   SYNTAX     INTEGER  {
                 on(0),
                 off(1) }
   ACCESS     read-only
   STATUS     mandatory
   DESCRIPTION
     "This attribute displays whether a multiframe RAI (remote alarm 
      indicator) alarm state has been entered. A multiframe RAI alarm 
      state is entered when a multiframe RAI alarm indicator (bit 6 of 
      timeslot 16 in frame 0 is set to a one) is observed and accumulated 
      for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is 
      intermittently received, the multiframe RAI defect accumulator is 
      decremented at a rate of 1/10 of the incrementing rate (alarm 
      integration ratio of 1/10), with all measurements based on a 200 ms 
      polling cycle.
      The multiframe RAI alarm condition is cleared when the 
      multiframe RAI alarm indication is not received for 10 seconds +/- 
      0.5 seconds. The multiframe RAI alarm is usually an indication that 
      the far end facility is unable to gain multiframe synchronization.
      
      The 8pE1Atm card does not support the multiframe RAI alarm."
   DEFVAL     { off }
::= { mscLpE1E1OperEntry 2 }

    Information by circitor

    mscLpE1RxMultifrmRaiAlarm OBJECT-TYPE
   SYNTAX     INTEGER  {
                 on(0),
                 off(1) }
   ACCESS     read-only
   STATUS     mandatory
   DESCRIPTION
     "This attribute displays whether a multiframe RAI (remote alarm 
      indicator) alarm state has been entered. A multiframe RAI alarm 
      state is entered when a multiframe RAI alarm indicator (bit 6 of 
      timeslot 16 in frame 0 is set to a one) is observed and accumulated 
      for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is 
      intermittently received, the multiframe RAI defect accumulator is 
      decremented at a rate of 1/10 of the incrementing rate (alarm 
      integration ratio of 1/10), with all measurements based on a 200 ms 
      polling cycle.
      The multiframe RAI alarm condition is cleared when the 
      multiframe RAI alarm indication is not received for 10 seconds +/- 
      0.5 seconds. The multiframe RAI alarm is usually an indication that 
      the far end facility is unable to gain multiframe synchronization.
      
      The 8pE1Atm card does not support the multiframe RAI alarm."
   DEFVAL     { off }
::= { mscLpE1E1OperEntry 2 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.562)

    Sharon Chisholm

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.562)

    Mike Bobbitt

    Brothers (2)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.562.36.2.1.12.8.17.1.1 mscLpE1MultifrmLofAlarm 0 0 This attribute indicates whether a multiframe LOF (loss of frame)
    alarm state is entered. A multiframe LOF alarm state is entere…
    1.3.6.1.4.1.562.36.2.1.12.8.17.1.3 mscLpE1TxMultifrmRaiAlarm 0 0 This attribute displays whether a multiframe RAI (remote alarm
    indicator) alarm is being sent on the E1 line. This is transmitte…