This attribute selects the data rate of the timeslots in a channel of a
DS1 component. For E1, the data rate of the timeslots will always
be 64kbit/s regardless of this attribute.
When doNotOverride is selected for a channel on a DS1, the data
rate of the channel's timeslots are dependant on the zeroCoding
selection of the DS1 component. If the zeroCoding is B8ZS (where
supported on the FP) or none, the timeslot's data rate will be 64kbit/
s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot
will be 56kbit/s.
When 56k is selected for a channel on a DS1, the least significant
bit of each timeslot of this Channel will always be set to 1 and not
used for data. The data rate for the timeslots of this channel is
therefore restricted to 56kbit/s.
One application of this attribute is to allow a DS1 line to support
mixing channels that originate from lines that use different
zeroCoding schemes.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute selects the data rate of the timeslots in a channel of a
DS1 component. For E1, the data rate of the timeslots will always
be 64kbit/s regardless of this attribute.
When doNotOverride is selected for a channel on a DS1, the data
rate of the channel's timeslots are dependant on the zeroCoding
selection of the DS1 component. If the zeroCoding is B8ZS (where
supported on the FP) or none, the timeslot's data rate will be 64kbit/
s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot
will be 56kbit/s.
When 56k is selected for a channel on a DS1, the least significant
bit of each timeslot of this Channel will always be set to 1 and not
used for data. The data rate for the timeslots of this channel is
therefore restricted to 56kbit/s.
One application of this attribute is to allow a DS1 line to support
mixing channels that originate from lines that use different
zeroCoding schemes.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpE1ChanTimeslotDataRate OBJECT-TYPE SYNTAX INTEGER { n56k(0), doNotOverride(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes." DEFVAL { doNotOverride } ::= { mscLpE1ChanProvEntry 2 }
mscLpE1ChanTimeslotDataRate OBJECT-TYPE SYNTAX INTEGER { n56k(0), doNotOverride(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes." DEFVAL { doNotOverride } ::= { mscLpE1ChanProvEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.1 | mscLpE1ChanTimeslots | 0 | 0 | This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used … |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.3 | mscLpE1ChanApplicationFramerName | 0 | 0 | This attribute defines the link to the software stack. It defines which application is running on top of this hardware component. |