This attribute indicates the traffic parameter conversion policy used
to specify the equivalent ATM bandwidth rate at this end point.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected
- PCR0+1 is based on the AR
- SCR0+1 is based on the CIR and EIR
- MBS0+1 is based on Bc,Be,CIR,EIR and AR
- Takes into account that the instananeous rate of the frame relay
stream can burst above CIR and up tp the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR0+1 is based on the AR
- SCR0 is based on the CIR
- MBS0 is based on Bc,CIR and AR
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer
- PCR0+1 is based on CIR and EIR
- SCR0 is based on the CIR
- MBS0 is based on the Bc,CIR and AR
- The maximum PCR is no longer based on AR but based on the
CIR and EIR.
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected
- PCR0+1 is based only on CIR.
Parsed from file nortelPC-frf5EpV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-Frf5EpMIB
This attribute indicates the traffic parameter conversion policy used
to specify the equivalent ATM bandwidth rate at this end point.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected
- PCR0+1 is based on the AR
- SCR0+1 is based on the CIR and EIR
- MBS0+1 is based on Bc,Be,CIR,EIR and AR
- Takes into account that the instananeous rate of the frame relay
stream can burst above CIR and up tp the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR0+1 is based on the AR
- SCR0 is based on the CIR
- MBS0 is based on Bc,CIR and AR
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer
- PCR0+1 is based on CIR and EIR
- SCR0 is based on the CIR
- MBS0 is based on the Bc,CIR and AR
- The maximum PCR is no longer based on AR but based on the
CIR and EIR.
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected
- PCR0+1 is based only on CIR.
Parsed from file Nortel-MsCarrier-MscPassport-Frf5EpMIB.mib
Module: Nortel-MsCarrier-MscPassport-Frf5EpMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-Frf5EpMIB
[Automatically extracted from oidview.com]
mscMcsMgrFrf5EpGEpTrafficParmConversionPolicy OBJECT-TYPE SYNTAX INTEGER { n3(3), n4(4), n5(5), n6(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the traffic parameter conversion policy used to specify the equivalent ATM bandwidth rate at this end point. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected - PCR0+1 is based on the AR - SCR0+1 is based on the CIR and EIR - MBS0+1 is based on Bc,Be,CIR,EIR and AR - Takes into account that the instananeous rate of the frame relay stream can burst above CIR and up tp the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR0+1 is based on the AR - SCR0 is based on the CIR - MBS0 is based on Bc,CIR and AR - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer - PCR0+1 is based on CIR and EIR - SCR0 is based on the CIR - MBS0 is based on the Bc,CIR and AR - The maximum PCR is no longer based on AR but based on the CIR and EIR. Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected - PCR0+1 is based only on CIR." ::= { mscMcsMgrFrf5EpGEpOperEntry 14 }
mscMcsMgrFrf5EpGEpTrafficParmConversionPolicy OBJECT-TYPE SYNTAX INTEGER { n3(3), n4(4), n5(5), n6(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the traffic parameter conversion policy used to specify the equivalent ATM bandwidth rate at this end point. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected - PCR0+1 is based on the AR - SCR0+1 is based on the CIR and EIR - MBS0+1 is based on Bc,Be,CIR,EIR and AR - Takes into account that the instananeous rate of the frame relay stream can burst above CIR and up tp the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR0+1 is based on the AR - SCR0 is based on the CIR - MBS0 is based on Bc,CIR and AR - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer - PCR0+1 is based on CIR and EIR - SCR0 is based on the CIR - MBS0 is based on the Bc,CIR and AR - The maximum PCR is no longer based on AR but based on the CIR and EIR. Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected - PCR0+1 is based only on CIR." ::= { mscMcsMgrFrf5EpGEpOperEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.4 | mscMcsMgrFrf5EpGEpLastVccClearCause | 0 | 0 | This attribute indicates the clear cause value of the last SPVC release message received on the FRF.5 end point Vcc pipe. |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.5 | mscMcsMgrFrf5EpGEpConnectionTransferPriority | 0 | 0 | This attribute indicates the transfer priority used to establish the ATM connection and to multiplex the Frame Relay DLCIs. |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.6 | mscMcsMgrFrf5EpGEpServiceCategory | 0 | 0 | This attribute indicates the ATM service category that is used for this connection. |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.8 | mscMcsMgrFrf5EpGEpPeakCellRate01 | 0 | 0 | This attribute indicates the Peak Cell Rate (PCR) of the FRF.5 ATM VCC for all cells (with CLP=0 and CLP=1). The pcr01 is derived… |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.9 | mscMcsMgrFrf5EpGEpSustainedCellRate0 | 0 | 0 | This attribute indicates the Sustained Cell Rate (SCR) of the FRF.5 ATM VCC for high priority cells (with CLP=0). The scr0 is der… |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.10 | mscMcsMgrFrf5EpGEpSustainedCellRate01 | 0 | 0 | This attribute indicates the Sustained Cell Rate (SCR) of the FRF.5 ATM VCC for all cells (with CLP=0 and CLP=1). The scr01 is de… |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.11 | mscMcsMgrFrf5EpGEpMaximumBurstSize0 | 0 | 0 | This attribute indicates the Maximum Burst Size (MBS) of the FRF.5 ATM VCC for high priority cells (with CLP=0). The mbs0 is deri… |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.12 | mscMcsMgrFrf5EpGEpMaximumBurstSize01 | 0 | 0 | This attribute indicates the Maximum Burst Size (MBS) of the FRF.5 ATM VCC for all cells (with CLP=0 and CLP=1). The mbs01 is der… |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.13 | mscMcsMgrFrf5EpGEpAvgFrameSize | 0 | 0 | This attribute indicates the average frame size that is used in the traffic parameter conversion policy calculations for this en… |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.15 | mscMcsMgrFrf5EpGEpType | 0 | 0 | This attribute indicates the FRF.5 End Point type. If the value is master, this End Point is responsible for initiating the call… |
| 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.20 | mscMcsMgrFrf5EpGEpLastVccCauseDiag | 0 | 0 | This attribute indicates the diagnostic value of the last SPVC release message received on the FRF.5 end point Vcc pipe. |