This attribute indicates the state of V.42. Valid states are:
notActive, The V.42 link connection with the Public Switched
Telephoned Network) PSTN modem is not established. None of the
V.42 functions including the error detection, error correction, and
flow control is provided to the data call. This is the initial state of
V.42.
disconnected, This means that the V42 link is disconnected.
linksetup, The V.42 operation enters this state from the
disconnected state after the V.42 sends to the PSTN modem a Set
Asynchronous Balanced Mode Extended (SABME) frame in an
attempt to establish the error control connection with the PSTN
modem.
frameReject, The V.42 operation enters into this state after it
identifies an invalid frame sent by the peer and it sends back a frame
reject (FRMR) frame to the peer.
disconnectRequest, The V.42 operation enters into this state after it
sends to the peer a disconnect (DISC) frame with the attempt to
disconnect the V.42 error control link.
informationTransfer, The V.42 enters into this state after it receives
a UA (unnumbered acknowledgment) frame which the peer sent
upon receipt of the SAMBE frame from IWF V.42. Once in this
state, the V.42 can exchange data and supervisory information with
its peer.
waitingAck, The V.42 enters this state after it sends polling enquiry
to its peer. The V.42 sends the polling enquiry when it receives a
reject frame (REJ) from its peer or either its acknowledgment timer
or inactivity timer timed out on the information frames sent out.
Parsed from file nortelPC-gsmIwfV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-GsmIwfMIB
This attribute indicates the state of V.42. Valid states are:
notActive, The V.42 link connection with the Public Switched
Telephoned Network) PSTN modem is not established. None of the
V.42 functions including the error detection, error correction, and
flow control is provided to the data call. This is the initial state of
V.42.
disconnected, This means that the V42 link is disconnected.
linksetup, The V.42 operation enters this state from the
disconnected state after the V.42 sends to the PSTN modem a Set
Asynchronous Balanced Mode Extended (SABME) frame in an
attempt to establish the error control connection with the PSTN
modem.
frameReject, The V.42 operation enters into this state after it
identifies an invalid frame sent by the peer and it sends back a frame
reject (FRMR) frame to the peer.
disconnectRequest, The V.42 operation enters into this state after it
sends to the peer a disconnect (DISC) frame with the attempt to
disconnect the V.42 error control link.
informationTransfer, The V.42 enters into this state after it receives
a UA (unnumbered acknowledgment) frame which the peer sent
upon receipt of the SAMBE frame from IWF V.42. Once in this
state, the V.42 can exchange data and supervisory information with
its peer.
waitingAck, The V.42 enters this state after it sends polling enquiry
to its peer. The V.42 sends the polling enquiry when it receives a
reject frame (REJ) from its peer or either its acknowledgment timer
or inactivity timer timed out on the information frames sent out.
Parsed from file Nortel-MsCarrier-MscPassport-GsmIwfMIB.mib
Module: Nortel-MsCarrier-MscPassport-GsmIwfMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-GsmIwfMIB
[Automatically extracted from oidview.com]
mscGsmBcV42ProtocolState OBJECT-TYPE SYNTAX INTEGER { notActive(0), disconnected(1), linksetup(2), frameReject(3), disconnectRequest(4), informationTransfer(5), waitingAck(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the state of V.42. Valid states are: notActive, The V.42 link connection with the Public Switched Telephoned Network) PSTN modem is not established. None of the V.42 functions including the error detection, error correction, and flow control is provided to the data call. This is the initial state of V.42. disconnected, This means that the V42 link is disconnected. linksetup, The V.42 operation enters this state from the disconnected state after the V.42 sends to the PSTN modem a Set Asynchronous Balanced Mode Extended (SABME) frame in an attempt to establish the error control connection with the PSTN modem. frameReject, The V.42 operation enters into this state after it identifies an invalid frame sent by the peer and it sends back a frame reject (FRMR) frame to the peer. disconnectRequest, The V.42 operation enters into this state after it sends to the peer a disconnect (DISC) frame with the attempt to disconnect the V.42 error control link. informationTransfer, The V.42 enters into this state after it receives a UA (unnumbered acknowledgment) frame which the peer sent upon receipt of the SAMBE frame from IWF V.42. Once in this state, the V.42 can exchange data and supervisory information with its peer. waitingAck, The V.42 enters this state after it sends polling enquiry to its peer. The V.42 sends the polling enquiry when it receives a reject frame (REJ) from its peer or either its acknowledgment timer or inactivity timer timed out on the information frames sent out." DEFVAL { notActive } ::= { mscGsmBcV42OperEntry 1 }
mscGsmBcV42ProtocolState OBJECT-TYPE SYNTAX INTEGER { notActive(0), disconnected(1), linksetup(2), frameReject(3), disconnectRequest(4), informationTransfer(5), waitingAck(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the state of V.42. Valid states are: notActive, The V.42 link connection with the Public Switched Telephoned Network) PSTN modem is not established. None of the V.42 functions including the error detection, error correction, and flow control is provided to the data call. This is the initial state of V.42. disconnected, This means that the V42 link is disconnected. linksetup, The V.42 operation enters this state from the disconnected state after the V.42 sends to the PSTN modem a Set Asynchronous Balanced Mode Extended (SABME) frame in an attempt to establish the error control connection with the PSTN modem. frameReject, The V.42 operation enters into this state after it identifies an invalid frame sent by the peer and it sends back a frame reject (FRMR) frame to the peer. disconnectRequest, The V.42 operation enters into this state after it sends to the peer a disconnect (DISC) frame with the attempt to disconnect the V.42 error control link. informationTransfer, The V.42 enters into this state after it receives a UA (unnumbered acknowledgment) frame which the peer sent upon receipt of the SAMBE frame from IWF V.42. Once in this state, the V.42 can exchange data and supervisory information with its peer. waitingAck, The V.42 enters this state after it sends polling enquiry to its peer. The V.42 sends the polling enquiry when it receives a reject frame (REJ) from its peer or either its acknowledgment timer or inactivity timer timed out on the information frames sent out." DEFVAL { notActive } ::= { mscGsmBcV42OperEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1.2 | mscGsmBcV42TxN401FrameSize | 0 | 0 | This attribute indicates the current value of parameter N401 for V.42 which is negotiated during Exchange Information (XID). Thi… |
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1.3 | mscGsmBcV42RxN401FrameSize | 0 | 0 | This attribute indicates the current value of N401, that is negotiated during Exchange Identification (XID). This is the maximum… |
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1.4 | mscGsmBcV42TxKwindowSize | 0 | 0 | This attribute indicates the current value of k, that is negotiated during Exchange Identification (XID). This is the size of fl… |
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1.5 | mscGsmBcV42RxKwindowSize | 0 | 0 | This attribute indicates the current value of k that is negotiated during Exchange Identification (XID). This is the size of flo… |