This attribute specifies the type of traffic transmitted over the path.
There are eight possible traffic types, and the path can transmit only
one of them. The originating end of the connection determines the
type. These are arbitrary designations for traffic type. The voice,
data and video traffic types are defined, and five other arbitrary
traffic types can be defined by the network administration. This
attribute is used in the route selection process to restrict the route to
trunks that support this traffic type. The supportedTrafficType trunk
attribute lists all the types of traffic allowed on the trunk. For
example, if requiredTrafficType is specified as trafficType1, then
only trunks that include trafficType1 in supportedTrafficType will
be candidates for this connection.
Parsed from file nortelPC-vncsCallServerV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-VncsCallServerMIB
This attribute specifies the type of traffic transmitted over the path.
There are eight possible traffic types, and the path can transmit only
one of them. The originating end of the connection determines the
type. These are arbitrary designations for traffic type. The voice,
data and video traffic types are defined, and five other arbitrary
traffic types can be defined by the network administration. This
attribute is used in the route selection process to restrict the route to
trunks that support this traffic type. The supportedTrafficType trunk
attribute lists all the types of traffic allowed on the trunk. For
example, if requiredTrafficType is specified as trafficType1, then
only trunks that include trafficType1 in supportedTrafficType will
be candidates for this connection.
Parsed from file Nortel-MsCarrier-MscPassport-VncsCallServerMIB.mib
Module: Nortel-MsCarrier-MscPassport-VncsCallServerMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-VncsCallServerMIB
[Automatically extracted from oidview.com]
mscVncsVpRequiredTrafficType OBJECT-TYPE SYNTAX INTEGER { voice(0), data(1), video(2), trafficType1(3), trafficType2(4), trafficType3(5), trafficType4(6), trafficType5(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The originating end of the connection determines the type. These are arbitrary designations for traffic type. The voice, data and video traffic types are defined, and five other arbitrary traffic types can be defined by the network administration. This attribute is used in the route selection process to restrict the route to trunks that support this traffic type. The supportedTrafficType trunk attribute lists all the types of traffic allowed on the trunk. For example, if requiredTrafficType is specified as trafficType1, then only trunks that include trafficType1 in supportedTrafficType will be candidates for this connection." DEFVAL { voice } ::= { mscVncsVpLCOpsEntry 6 }
mscVncsVpRequiredTrafficType OBJECT-TYPE SYNTAX INTEGER { voice(0), data(1), video(2), trafficType1(3), trafficType2(4), trafficType3(5), trafficType4(6), trafficType5(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The originating end of the connection determines the type. These are arbitrary designations for traffic type. The voice, data and video traffic types are defined, and five other arbitrary traffic types can be defined by the network administration. This attribute is used in the route selection process to restrict the route to trunks that support this traffic type. The supportedTrafficType trunk attribute lists all the types of traffic allowed on the trunk. For example, if requiredTrafficType is specified as trafficType1, then only trunks that include trafficType1 in supportedTrafficType will be candidates for this connection." DEFVAL { voice } ::= { mscVncsVpLCOpsEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.1 | mscVncsVpSetupPriority | 0 | 0 | This attribute specifies the priority at which a path is established. Zero is the highest priority and four is the lowest. When … |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.2 | mscVncsVpHoldingPriority | 0 | 0 | This attribute specifies the priority that a path holds once it is established. Zero is the highest priority and four is the low… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.3 | mscVncsVpBumpPreference | 0 | 0 | This attribute specifies when bumping occurs in the route selection process. A connection with higher (numerically less) setupPr… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.7 | mscVncsVpPermittedTrunkTypes | 0 | 0 | This attribute specifies up to eight types of trunks that can be used on the route. The terrestrial and satellite trunk types ha… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.8 | mscVncsVpRequiredSecurity | 0 | 0 | This attribute specifies the required minimum level of security of the trunks on the route. Zero represents the most secure and … |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.9 | mscVncsVpRequiredCustomerParm | 0 | 0 | This attribute specifies the allowed customer defined parameter of the trunks on the route. Its value, a number from zero to sev… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.10 | mscVncsVpPathAttributeToMinimize | 0 | 0 | This attribute specifies whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.11 | mscVncsVpMaximumAcceptableCost | 0 | 0 | This attribute specifies an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.12 | mscVncsVpMaximumAcceptableDelay | 0 | 0 | This attribute specifies an upper bound on the delay of a route, which is the sum of the delays of all trunks on the route. It s… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.13 | mscVncsVpEmissionPriority | 0 | 0 | This attribute specifies the urgency with which packets on the path are emitted by the trunks on the route. EmissionPriority of … |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.14 | mscVncsVpDiscardPriority | 0 | 0 | This attribute specifies the importance of the packets on the path. One is used for paths carrying the most important traffic, a… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.15 | mscVncsVpPathFailureAction | 0 | 0 | This attribute specifies whether the application can tolerate momentary interruption of a path while a new path is selected. If d… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.16 | mscVncsVpOptimization | 0 | 0 | This attribute specifies whether this connection should attempt to optimize its path when requested by the Rtg Pors component. E… |
| 1.3.6.1.4.1.562.36.2.1.44.3.2.1.17 | mscVncsVpMaximumAcceptableGatewayCost | 0 | 0 | This attribute indicates an upper bound on the gateway cost metric of a route, which is the sum of the gateway cost metrics of a… |