This attribute counts the number of times a FRF.10 protocol error
has occurred. Any one of the following events constitutes a protocol
error:
1. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir, Bc and Be are all zero;
2. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir is zero but Bc is
non-zero, or Bc is zero but Cir is non-zero;
3. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, the Minimum Acceptable CIR
is greater than Cir;
4. At the destination end, any of the destination to source direction
link layer core parameters has been increased in the
CONNECT message from the called user;
5. At the destination end, the destination to source direction Cir
in the CONNECT message is smaller than the corresponding
minimum acceptable Cir signaled to the called user;
6. At the source end, any of the source to destination direction
link layer core parameters in the CONNECT message from the
destination end has been increased;
7. At the source end, the source to destination direction Cir, after
negotiation, is smaller than the corresponding minimum
acceptable Cir;
8. The network has received a STATUS message from the user
with an incompatible FRF.10 state.
When this count reaches maximum, it wraps to zero.
Parsed from file nortelPC-frameRelayNniV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-FrameRelayNniMIB
This attribute counts the number of times a FRF.10 protocol error
has occurred. Any one of the following events constitutes a protocol
error:
1. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir, Bc and Be are all zero;
2. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir is zero but Bc is
non-zero, or Bc is zero but Cir is non-zero;
3. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, the Minimum Acceptable CIR
is greater than Cir;
4. At the destination end, any of the destination to source direction
link layer core parameters has been increased in the
CONNECT message from the called user;
5. At the destination end, the destination to source direction Cir
in the CONNECT message is smaller than the corresponding
minimum acceptable Cir signaled to the called user;
6. At the source end, any of the source to destination direction
link layer core parameters in the CONNECT message from the
destination end has been increased;
7. At the source end, the source to destination direction Cir, after
negotiation, is smaller than the corresponding minimum
acceptable Cir;
8. The network has received a STATUS message from the user
with an incompatible FRF.10 state.
When this count reaches maximum, it wraps to zero.
Parsed from file Nortel-MsCarrier-MscPassport-FrameRelayNniMIB.mib
Module: Nortel-MsCarrier-MscPassport-FrameRelayNniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-FrameRelayNniMIB
[Automatically extracted from oidview.com]
mscFrNniSigProtocolErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times a FRF.10 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir, Bc and Be are all zero; 2. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir is zero but Bc is non-zero, or Bc is zero but Cir is non-zero; 3. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, the Minimum Acceptable CIR is greater than Cir; 4. At the destination end, any of the destination to source direction link layer core parameters has been increased in the CONNECT message from the called user; 5. At the destination end, the destination to source direction Cir in the CONNECT message is smaller than the corresponding minimum acceptable Cir signaled to the called user; 6. At the source end, any of the source to destination direction link layer core parameters in the CONNECT message from the destination end has been increased; 7. At the source end, the source to destination direction Cir, after negotiation, is smaller than the corresponding minimum acceptable Cir; 8. The network has received a STATUS message from the user with an incompatible FRF.10 state. When this count reaches maximum, it wraps to zero." ::= { mscFrNniSigStatsEntry 6 }
mscFrNniSigProtocolErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times a FRF.10 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir, Bc and Be are all zero; 2. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir is zero but Bc is non-zero, or Bc is zero but Cir is non-zero; 3. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, the Minimum Acceptable CIR is greater than Cir; 4. At the destination end, any of the destination to source direction link layer core parameters has been increased in the CONNECT message from the called user; 5. At the destination end, the destination to source direction Cir in the CONNECT message is smaller than the corresponding minimum acceptable Cir signaled to the called user; 6. At the source end, any of the source to destination direction link layer core parameters in the CONNECT message from the destination end has been increased; 7. At the source end, the source to destination direction Cir, after negotiation, is smaller than the corresponding minimum acceptable Cir; 8. The network has received a STATUS message from the user with an incompatible FRF.10 state. When this count reaches maximum, it wraps to zero." ::= { mscFrNniSigStatsEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.70.8.17.1.1 | mscFrNniSigCurrentNumberOfSvcCalls | 0 | 0 | This attribute indicates the number of Frame Relay SVCs currently existing on this interface. |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.2 | mscFrNniSigInCalls | 0 | 0 | This attribute indicates the current number of incoming SVCs on this interface (that is, the number of SVCs for which this inter… |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.3 | mscFrNniSigInCallsRefused | 0 | 0 | This attribute counts the incoming SVC call requests that are rejected by either this interface or by the called user. When this… |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.4 | mscFrNniSigOutCalls | 0 | 0 | This attribute indicates the current number of outgoing SVCs on this interface (that is, the number of SVCs for which this inter… |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.5 | mscFrNniSigOutCallsFailed | 0 | 0 | This attribute counts the outgoing SVC call requests that are rejected by either this interface, or by the network side of the de… |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.7 | mscFrNniSigQualityOfServiceNotAvailable | 0 | 0 | This attribute counts the number of incoming and outgoing SVCs that are rejected because the quality of service requested cannot… |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.8 | mscFrNniSigSetupTimeout | 0 | 0 | This attribute counts the number of times the T303 setup timer has expired. When this count reaches maximum, it wraps to zero. |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.9 | mscFrNniSigLastCauseInStatusMsgReceived | 0 | 0 | This attribute indicates the cause value in the last received user's STATUS message to an existing call. The DLCI to which this S… |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.10 | mscFrNniSigLastStateInStatusMsgReceived | 0 | 0 | This attribute indicates the state value in the last received user's STATUS message to an existing call. The DLCI to which this S… |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.11 | mscFrNniSigLastDlciReceivedStatus | 0 | 0 | This attribute shows the value of the DLCI that has most recently received a STATUS message from the user. The initial value of … |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.12 | mscFrNniSigLastStateReceivedStatus | 0 | 0 | This attribute shows the network FRF.10 state of the DLCI that has most recently received a STATUS message from the user. The DL… |
1.3.6.1.4.1.562.36.2.1.70.8.17.1.15 | mscFrNniSigDlciCollisions | 0 | 0 | This attribute counts the number of call failures due to DLCI collisions. |