This attribute counts the number of times a FRF.4 protocol error has
occurred. Any one of the following events constitutes a protocol
error:
1. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir, Bc and Be are all zero;
2. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir is zero but Bc is
non-zero, or Bc is zero but Cir is non-zero;
3. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, the Minimum Acceptable CIR
is greater than Cir;
4. At the destination end, any of the destination to source direction
link layer core parameters has been increased in the
CONNECT message from the called user;
5. At the destination end, the destination to source direction Cir
in the CONNECT message is smaller than the corresponding
minimum acceptable Cir signaled to the called user;
6. At the source end, any of the source to destination direction
link layer core parameters in the CONNECT message from the
destination end has been increased;
7. At the source end, the source to destination direction Cir, after
negotiation, is smaller than the corresponding minimum
acceptable Cir;
8. The network has received a STATUS message from the user
with an incompatible FRF.4 state.
When this count reaches maximum, it wraps to zero.
Parsed from file nortelPC-frameRelayUniV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
This attribute counts the number of times a FRF.4 protocol error has
occurred. Any one of the following events constitutes a protocol
error:
1. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir, Bc and Be are all zero;
2. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir is zero but Bc is
non-zero, or Bc is zero but Cir is non-zero;
3. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, the Minimum Acceptable CIR
is greater than Cir;
4. At the destination end, any of the destination to source direction
link layer core parameters has been increased in the
CONNECT message from the called user;
5. At the destination end, the destination to source direction Cir
in the CONNECT message is smaller than the corresponding
minimum acceptable Cir signaled to the called user;
6. At the source end, any of the source to destination direction
link layer core parameters in the CONNECT message from the
destination end has been increased;
7. At the source end, the source to destination direction Cir, after
negotiation, is smaller than the corresponding minimum
acceptable Cir;
8. The network has received a STATUS message from the user
with an incompatible FRF.4 state.
When this count reaches maximum, it wraps to zero.
Parsed from file Nortel-MsCarrier-MscPassport-FrameRelayUniMIB.mib
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
[Automatically extracted from oidview.com]
mscFrUniSigProtocolErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times a FRF.4 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir, Bc and Be are all zero; 2. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir is zero but Bc is non-zero, or Bc is zero but Cir is non-zero; 3. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, the Minimum Acceptable CIR is greater than Cir; 4. At the destination end, any of the destination to source direction link layer core parameters has been increased in the CONNECT message from the called user; 5. At the destination end, the destination to source direction Cir in the CONNECT message is smaller than the corresponding minimum acceptable Cir signaled to the called user; 6. At the source end, any of the source to destination direction link layer core parameters in the CONNECT message from the destination end has been increased; 7. At the source end, the source to destination direction Cir, after negotiation, is smaller than the corresponding minimum acceptable Cir; 8. The network has received a STATUS message from the user with an incompatible FRF.4 state. When this count reaches maximum, it wraps to zero." ::= { mscFrUniSigStatsEntry 8 }
mscFrUniSigProtocolErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times a FRF.4 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir, Bc and Be are all zero; 2. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir is zero but Bc is non-zero, or Bc is zero but Cir is non-zero; 3. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, the Minimum Acceptable CIR is greater than Cir; 4. At the destination end, any of the destination to source direction link layer core parameters has been increased in the CONNECT message from the called user; 5. At the destination end, the destination to source direction Cir in the CONNECT message is smaller than the corresponding minimum acceptable Cir signaled to the called user; 6. At the source end, any of the source to destination direction link layer core parameters in the CONNECT message from the destination end has been increased; 7. At the source end, the source to destination direction Cir, after negotiation, is smaller than the corresponding minimum acceptable Cir; 8. The network has received a STATUS message from the user with an incompatible FRF.4 state. When this count reaches maximum, it wraps to zero." ::= { mscFrUniSigStatsEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.1 | mscFrUniSigCurrentNumberOfSvcCalls | 0 | 0 | This attribute indicates the number of Frame Relay SVCs currently existing on this interface. |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.4 | mscFrUniSigInCalls | 0 | 0 | This attribute indicates the current number of incoming SVCs on this interface (that is, the number of SVCs for which this inter… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.5 | mscFrUniSigInCallsRefused | 0 | 0 | This attribute counts the incoming SVC call requests that are rejected by either this interface or by the called user. When this… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.6 | mscFrUniSigOutCalls | 0 | 0 | This attribute indicates the current number of outgoing SVCs on this interface (that is, the number of SVCs for which this inter… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.7 | mscFrUniSigOutCallsFailed | 0 | 0 | This attribute counts the outgoing SVC call requests that are rejected by either this interface, or by the network side of the de… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.9 | mscFrUniSigQualityOfServiceNotAvailable | 0 | 0 | This attribute counts the number of incoming and outgoing SVCs that are rejected because the quality of service requested cannot… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.10 | mscFrUniSigSetupTimeout | 0 | 0 | This attribute counts the number of times the T303 setup timer has expired. When this count reaches maximum, it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.11 | mscFrUniSigLastCauseInStatusMsgReceived | 0 | 0 | This attribute indicates the cause value in the last received user's STATUS message to an existing call. The DLCI to which this S… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.12 | mscFrUniSigLastStateInStatusMsgReceived | 0 | 0 | This attribute indicates the state value in the last received user's STATUS message to an existing call. The DLCI to which this S… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.13 | mscFrUniSigLastDlciReceivedStatus | 0 | 0 | This attribute shows the value of the DLCI that has most recently received a STATUS message from the user. The initial value of … |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.14 | mscFrUniSigLastStateReceivedStatus | 0 | 0 | This attribute shows the network FRF.4 state of the DLCI that has most recently received a STATUS message from the user. The DLC… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.15 | mscFrUniSigLastTimeMsgBlockCongested | 0 | 0 | This attribute displays the most recent time that an SVC DLCI has failed to get a message block due to message block congestion.… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.16 | mscFrUniSigLastDlciWithMsgBlockCongestion | 0 | 0 | This attribute shows the value of the DLCI that has most recently failed to get a message block due to message block congestion.… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.17 | mscFrUniSigCurrentAggregateSvcCirNormalQ | 0 | 0 | This attribute shows the aggregate SVC CIR (for traffic transiting in the network through normal priority queue) assigned to exi… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.18 | mscFrUniSigCurrentAggregateSvcCirHighQ | 0 | 0 | This attribute shows the aggregate SVC CIR (for traffic transiting in the network through high priority queue) assigned to exist… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.19 | mscFrUniSigCurrentAggregateSvcCirInterruptQ | 0 | 0 | This attribute shows the aggregate SVC CIR (for traffic transiting in the network through interrupting queue) assigned to existi… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.20 | mscFrUniSigCurrentAggregateSvcEirNormalQ | 0 | 0 | This attribute shows the aggregate SVC EIR (for excess traffic transiting in the network through normal priority queue) assigned… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.21 | mscFrUniSigCurrentAggregateSvcEirHighQ | 0 | 0 | This attribute shows the aggregate SVC EIR (for excess traffic transiting in the network through high priority queue) assigned t… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.22 | mscFrUniSigCurrentAggregateSvcEirInterruptQ | 0 | 0 | This attribute shows the aggregate SVC EIR (for excess traffic transiting in the network through interrupting queue) assigned to… |