This attribute specifies the bearer capability. It is one of the
Broadband Bearer Capability (BBC) attributes. The purpose of the
BBC information element is to indicate a requested broadband
connection-oriented bearer service to be provided by the network.
The value derivedFromServiceCategory specifies that the actual
value which is used for this connection is derived from the value of
the atmServiceCategory. Either, this attribute must be set to
derivedFromServiceCategory, or the atmServiceCategory attribute
must be set to derivedFromBBC, but not both.
Class a service is a connection-oriented, constant bit rate ATM
transport service. Class a service has end to end timing
requirements and may require stringent cell loss, cell delay and cell
delay variation performance.When a is set, the user is requesting
more than an ATM only service. The network may look at the AAL
to provide interworking based upon its contents.
Class c service is a connection-oriented, variable bit rate ATM
transport service. Class c service has no end-to-end timing
requirements. When c is set, the user is requesting more than an
ATM only service. The network interworking function may look at
the AAL and provide service based on it.
Class x service is a connection-oriented ATM transport service
where the AAL, trafficType (vbr or cbr) and timing requirements
are user defined (that is, transparent to the network).When x is set
the user is requesting an ATM only service from the network. In this
case, the network shall not process any higher layer protocol.
Parsed from file nortelPC-atmNetworkingV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmNetworkingMIB
This attribute specifies the bearer capability. It is one of the
Broadband Bearer Capability (BBC) attributes. The purpose of the
BBC information element is to indicate a requested broadband
connection-oriented bearer service to be provided by the network.
The value derivedFromServiceCategory specifies that the actual
value which is used for this connection is derived from the value of
the atmServiceCategory. Either, this attribute must be set to
derivedFromServiceCategory, or the atmServiceCategory attribute
must be set to derivedFromBBC, but not both.
Class a service is a connection-oriented, constant bit rate ATM
transport service. Class a service has end to end timing
requirements and may require stringent cell loss, cell delay and cell
delay variation performance.When a is set, the user is requesting
more than an ATM only service. The network may look at the AAL
to provide interworking based upon its contents.
Class c service is a connection-oriented, variable bit rate ATM
transport service. Class c service has no end-to-end timing
requirements. When c is set, the user is requesting more than an
ATM only service. The network interworking function may look at
the AAL and provide service based on it.
Class x service is a connection-oriented ATM transport service
where the AAL, trafficType (vbr or cbr) and timing requirements
are user defined (that is, transparent to the network).When x is set
the user is requesting an ATM only service from the network. In this
case, the network shall not process any higher layer protocol.
Parsed from file Nortel-MsCarrier-MscPassport-AtmNetworkingMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmNetworkingMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmNetworkingMIB
[Automatically extracted from oidview.com]
mscARtgPnniRfBearerClassBbc OBJECT-TYPE SYNTAX INTEGER { a(1), c(3), x(16), derivedFromServiceCategory(31) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the bearer capability. It is one of the Broadband Bearer Capability (BBC) attributes. The purpose of the BBC information element is to indicate a requested broadband connection-oriented bearer service to be provided by the network. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both. Class a service is a connection-oriented, constant bit rate ATM transport service. Class a service has end to end timing requirements and may require stringent cell loss, cell delay and cell delay variation performance.When a is set, the user is requesting more than an ATM only service. The network may look at the AAL to provide interworking based upon its contents. Class c service is a connection-oriented, variable bit rate ATM transport service. Class c service has no end-to-end timing requirements. When c is set, the user is requesting more than an ATM only service. The network interworking function may look at the AAL and provide service based on it. Class x service is a connection-oriented ATM transport service where the AAL, trafficType (vbr or cbr) and timing requirements are user defined (that is, transparent to the network).When x is set the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol." DEFVAL { derivedFromServiceCategory } ::= { mscARtgPnniRfCriteriaEntry 12 }
mscARtgPnniRfBearerClassBbc OBJECT-TYPE SYNTAX INTEGER { a(1), c(3), x(16), derivedFromServiceCategory(31) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the bearer capability. It is one of the Broadband Bearer Capability (BBC) attributes. The purpose of the BBC information element is to indicate a requested broadband connection-oriented bearer service to be provided by the network. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both. Class a service is a connection-oriented, constant bit rate ATM transport service. Class a service has end to end timing requirements and may require stringent cell loss, cell delay and cell delay variation performance.When a is set, the user is requesting more than an ATM only service. The network may look at the AAL to provide interworking based upon its contents. Class c service is a connection-oriented, variable bit rate ATM transport service. Class c service has no end-to-end timing requirements. When c is set, the user is requesting more than an ATM only service. The network interworking function may look at the AAL and provide service based on it. Class x service is a connection-oriented ATM transport service where the AAL, trafficType (vbr or cbr) and timing requirements are user defined (that is, transparent to the network).When x is set the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol." DEFVAL { derivedFromServiceCategory } ::= { mscARtgPnniRfCriteriaEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.1 | mscARtgPnniRfDestinationAddress | 0 | 0 | This attribute specifies the destination NSAP address to be used for the computation. If this attribute specifies an invalid add… |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.2 | mscARtgPnniRfMaxRoutes | 0 | 0 | This attribute specifies a ceiling on the number of routes to be computed. |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.3 | mscARtgPnniRfTxTrafficDescType | 0 | 0 | mscARtgPnniRftxTrafficDescType |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.5 | mscARtgPnniRfRxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the receive direction of this connection as defined … |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.6 | mscARtgPnniRfAtmServiceCategory | 0 | 0 | This attribute specifies the ATM service category for both directions of the connection. If this attribute is set to derivedFrom… |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.10 | mscARtgPnniRfFwdQosClass | 0 | 0 | This attribute specifies the quality of service for the forward direction for this connection. Class 1 supports a QOS that will … |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.11 | mscARtgPnniRfBwdQosClass | 0 | 0 | This attribute specifies the quality of service for the backward direction for this connection. Class 1 supports a QOS that will… |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.13 | mscARtgPnniRfTransferCapabilityBbc | 0 | 0 | mscARtgPnniRftransferCapabilityBbc |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.14 | mscARtgPnniRfClippingBbc | 0 | 0 | This attribute specifies the value for the clipping susceptibility parameter in the BBC IE. This attribute is only used for SPVC… |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.15 | mscARtgPnniRfBestEffort | 0 | 0 | This attribute specifies the value of the best effort parameter in the ATM Traffic Descriptor IE. It is one of the Broadband Bea… |
| 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.16 | mscARtgPnniRfOptimizationMetric | 0 | 0 | This attribute specifies the optimization metric to be used in the route computation; one of cell delay variation (cdv), maximum… |