If the etsysPolicyRuleProfileIndex is 0 then this field
contains the currently applied profile ID for frames
matching this rule. This may be either the administratively
applied value or the dynamically applied value.
If the etsysPolicyRuleProfileIndex is not 0, then this
object does not exist and will not be returned.
Note that one special, otherwise illegal, values of the
etsysPolicyRuleCoS are used in defining the forwarding
action.
-1 Indicates that no profile ID is being applied
by this rule.
Parsed from file ENTERASYS-POLICY-PROFILE-MIB.mib
Module: ENTERASYS-POLICY-PROFILE-MIB
etsysPolicyRuleOperPid OBJECT-TYPE SYNTAX Integer32(-1|0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "If the etsysPolicyRuleProfileIndex is 0 then this field contains the currently applied profile ID for frames matching this rule. This may be either the administratively applied value or the dynamically applied value. If the etsysPolicyRuleProfileIndex is not 0, then this object does not exist and will not be returned. Note that one special, otherwise illegal, values of the etsysPolicyRuleCoS are used in defining the forwarding action. -1 Indicates that no profile ID is being applied by this rule." DEFVAL { -1 } ::= { etsysPolicyRuleEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.1 | etsysPolicyRuleProfileIndex | 0 | 0 | The etsysPolicyProfileIndex for which the rule is defined. A value of zero(0) has special meaning in that it scopes rules which a… |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.2 | etsysPolicyRuleType | 0 | 0 | The type of network traffic reference by the etsysPolicyRuleData. |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.3 | etsysPolicyRuleData | 0 | 0 | The data pattern to match against, as defined by the etsysPolicyRuleType, encoded in network-byte order. |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.4 | etsysPolicyRulePrefixBits | 0 | 0 | The relevant number of bits defined by the etsysPolicyRuleData, to be used when matching against a frame, relevant bits are speci… |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.5 | etsysPolicyRulePortType | 0 | 0 | The port number on which the rule will be applied. Zero(0) is a special case, indicating that the rule should be applied to all … |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.6 | etsysPolicyRulePort | 0 | 0 | The port number on which the rule will be applied. Zero(0) is a special case, indicating that the rule should be applied to all … |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.7 | etsysPolicyRuleRowStatus | 0 | 0 | The status of this row. When set to active(1) this entry's classification rule, as referenced by etsysPolicyRulesOID, becomes one… |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.8 | etsysPolicyRuleStorageType | 0 | 0 | The storage type of this row. When set to volatile(1) this entry's classification rule, as referenced by etsysPolicyRulesOID, wil… |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.9 | etsysPolicyRuleUsageList | 0 | 0 | When read, a set bit indicates that this rule was used to classify traffic on the corresponding port. When set, the native PortL… |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.10 | etsysPolicyRuleResult1 | 0 | 0 | If the etsysPolicyRuleProfileIndex is 0 then this field is read-only and defines the profile ID which will assigned to frames mat… |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.11 | etsysPolicyRuleResult2 | 0 | 0 | If the etsysPolicyRuleProfileIndex is 0 then this field is read-create and defines the profile ID which the managing entity desir… |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.12 | etsysPolicyRuleAuditSyslogEnable | 0 | 0 | Controls the sending of a syslog message when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1. |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.13 | etsysPolicyRuleAuditTrapEnable | 0 | 0 | Controls the sending of an SNMP NOTIFICATION when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1. |
| 1.3.6.1.4.1.5624.1.2.6.11.6.1.14 | etsysPolicyRuleDisablePort | 0 | 0 | Controls the disabling of a port (ifOperStatus of the corresponding ifIndex will be down) when a bit in the etsysPolicyRuleUsageL… |