Point-to-multipoint bridge mode requires an activation
key to enable. A valid multipoint activation key must
be entered as a string of ACSCII characters translating
to the binary HEX value of the key before the Access Point
will accept the point-to-multipoint bridge mode setting.
Returns SNMP_BAD_VALUE if validation fails.
This object must be saved across a system reset and/or a
power cycle.
Parsed from file enterasys-802dot11ext.txt
Company: None
Module: ENTERASYS-IEEE802DOT11EXT-MIB
Point-to-multipoint bridge mode requires an activation
key to enable. A valid multipoint activation key must
be entered as a string of ACSCII characters translating
to the binary HEX value of the key before the Access Point
will accept the point-to-multipoint bridge mode setting.
Returns SNMP_BAD_VALUE if validation fails.
This object must be saved across a system reset and/or a
power cycle.
Parsed from file ENTERASYS-IEEE802DOT11EXT-MIB.mib
Module: ENTERASYS-IEEE802DOT11EXT-MIB
Vendor: Enterasys Networks
Module: ENTERASYS-IEEE802DOT11EXT-MIB
[Automatically extracted from oidview.com]
etsysDot11ExtBldgMPActivationKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Point-to-multipoint bridge mode requires an activation key to enable. A valid multipoint activation key must be entered as a string of ACSCII characters translating to the binary HEX value of the key before the Access Point will accept the point-to-multipoint bridge mode setting. Returns SNMP_BAD_VALUE if validation fails. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtBldgEntry 7 }
etsysDot11ExtBldgMPActivationKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Point-to-multipoint bridge mode requires an activation key to enable. A valid multipoint activation key must be entered as a string of ACSCII characters translating to the binary HEX value of the key before the Access Point will accept the point-to-multipoint bridge mode setting. Returns SNMP_BAD_VALUE if validation fails. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtBldgEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5624.1.2.9.1.3.1.1.1 | etsysDot11ExtBldgRemoteMAC1 | 0 | 0 | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a s… |
1.3.6.1.4.1.5624.1.2.9.1.3.1.1.2 | etsysDot11ExtBldgRemoteMAC2 | 0 | 0 | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a s… |
1.3.6.1.4.1.5624.1.2.9.1.3.1.1.3 | etsysDot11ExtBldgRemoteMAC3 | 0 | 0 | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a s… |
1.3.6.1.4.1.5624.1.2.9.1.3.1.1.4 | etsysDot11ExtBldgRemoteMAC4 | 0 | 0 | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a s… |
1.3.6.1.4.1.5624.1.2.9.1.3.1.1.5 | etsysDot11ExtBldgRemoteMAC5 | 0 | 0 | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a s… |
1.3.6.1.4.1.5624.1.2.9.1.3.1.1.6 | etsysDot11ExtBldgRemoteMAC6 | 0 | 0 | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a s… |