This represents the group ID advertised in the LDP signaling
if wwpLeosVplsVirtualCircuitMplsType is set to dynamic.
Parsed from file WWP-LEOS-VPLS-MIB.mib
Module: WWP-LEOS-VPLS-MIB
Vendor: World Wide Packets
Module: WWP-LEOS-VPLS-MIB
[Automatically extracted from oidview.com]
wwpLeosVplsVirtualCircuitMplsGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This represents the group ID advertised in the LDP signaling if wwpLeosVplsVirtualCircuitMplsType is set to dynamic." DEFVAL { 0 } ::= { wwpLeosVplsVirtualCircuitMplsEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.1 | wwpLeosVplsVirtualCircuitMplsIndex | 0 | 0 | This represents the virtual circuit index in the table. This number should be unique in the table. |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.2 | wwpLeosVplsVirtualCircuitMplsName | 0 | 0 | This represents the name of the vrtual circuit associated with the given virtual circuit. Mpls and Ethernet virtual circuit name … |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.3 | wwpLeosVplsVirtualCircuitMplsType | 0 | 0 | This represents the type of the virtual circuit. |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.4 | wwpLeosVplsVirtualCircuitMplsDestAddr | 0 | 0 | This represents the destination address used by the signaling protocol if wwpLeosVplsVirtualCircuitMplsType is set to dynamic. Thi… |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.5 | wwpLeosVplsVirtualCircuitMplsTunnelPolicy | 0 | 0 | This object represents that this virtual circuit should select the tunnel as fixed or should it use the first active tunnel avai… |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.6 | wwpLeosVplsVirtualCircuitMplsFixedTunnelId | 0 | 0 | This represents the tunnel that this virtual circuit should be mapped to. This object is only used if wwpLeosVplsVirtualCircuitM… |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.7 | wwpLeosVplsVirtualCircuitMplsActiveTunnelId | 0 | 0 | This represents the tunnel that this virtual circuit is currently using. This object is equal to wwpLeosVplsVirtualCircuitMplsFi… |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.8 | wwpLeosVplsVirtualCircuitMplsOperStatus | 0 | 0 | This represents the operational status of the virtual circuit. |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.9 | wwpLeosVplsVirtualCircuitMplsEncapLabel | 0 | 0 | If wwpLeosVplsVirtualCircuitMplsType is set to static then this object specifies the encap label the should be used for this virt… |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.10 | wwpLeosVplsVirtualCircuitMplsDecapLabel | 0 | 0 | If wwpLeosVplsVirtualCircuitMplsType is set to static then this object specifies the decap label the should be used for this virt… |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.12 | wwpLeosVplsVirtualCircuitMplsProtectionType | 0 | 0 | This represents that this virtual circuit is primary or secondary virtual circuit. If primary virtual circuit goes down that sec… |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.13 | wwpLeosVplsVirtualCircuitMplsStatusTlv | 0 | 0 | This mib specifies that the Status TLV in LDP signaling should be advewrtised or not. This mib object is only used if wwpLeosVpl… |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.14 | wwpLeosVplsVirtualCircuitMplsMtu | 0 | 0 | Setting this object will set the MTU for this VC. This MTU is advertised to the peer if wwpLeosVplsVirtualCircuitMplsType is set … |
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.15 | wwpLeosVplsVirtualCircuitMplsStatus | 0 | 0 | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set t… |