The admin state of the transceiver.
Parsed from file WWP-LEOS-PORT-XCVR-MIB.mib
Module: WWP-LEOS-PORT-XCVR-MIB
Vendor: World Wide Packets
Module: WWP-LEOS-PORT-XCVR-MIB
[Automatically extracted from oidview.com]
wwpLeosPortXcvrAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2), loopback(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The admin state of the transceiver." ::= { wwpLeosPortXcvrEntry 45 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.1 | wwpLeosPortXcvrId | 0 | 0 | The id for the transceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.2 | wwpLeosPortXcvrOperState | 0 | 0 | The oper state of the transceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.3 | wwpLeosPortXcvrIdentiferType | 0 | 0 | Type for the tranceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.4 | wwpLeosPortXcvrExtIdentiferType | 0 | 0 | Extended identifier type represents for this xcvr. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5 | wwpLeosPortXcvrConnectorType | 0 | 0 | Type of connector. unknown(1), sc(2), fiberChannelStyle1(3), fiberChannelStyle2(4), bnc/tnc(5), coaxialHeader(6), fiberJack(7), lc(8), m… |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.6 | wwpLeosPortXcvrType | 0 | 0 | Type of Transceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.7 | wwpLeosPortXcvrVendorName | 0 | 0 | String containing this transceiver's vendor name. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.8 | wwpLeosPortXcvrVendorOUI | 0 | 0 | String containing this transceiver's vendor OUI. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.9 | wwpLeosPortXcvrVendorPN | 0 | 0 | String containing this transceiver's vendor OUI. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.10 | wwpLeosPortXcvrRevNum | 0 | 0 | String containing this tranceiver's part revision number. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.11 | wwpLeosPortXcvrSerialNum | 0 | 0 | String containing this tranceiver's part serial number. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.12 | wwpLeosPortXcvrEncodingType | 0 | 0 | Type of encoding used. unspecified(1), 8B10B(2), 4b5b(3), NRZ(4), Manchester(5), SONET(6), reserved(7-256) |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.13 | wwpLeosPortXcvrMfgDate | 0 | 0 | string containing this tranceiver's date. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.14 | wwpLeosPortXcvrComplianceVer | 0 | 0 | This respresents the compliance version. Value 1 means digital diagnostic functionality not included or undefined Value 2 means in… |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.15 | wwpLeosPortXcvrWaveLength | 0 | 0 | This respresents the wavelength of the tranceiver. Units are nano meter. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16 | wwpLeosPortXcvrTemperature | 0 | 0 | This respresents the temperature of the tranceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17 | wwpLeosPortXcvrVcc | 0 | 0 | This respresents the voltage of the tranceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.18 | wwpLeosPortXcvrBias | 0 | 0 | This respresents the bias of the tranceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.19 | wwpLeosPortXcvrRxPower | 0 | 0 | This respresents the measured receive power of the transceiver. Units are Watts. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.20 | wwpLeosPortXcvrTxState | 0 | 0 | Indicates whether this transceiver is currently set to transmit. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.21 | wwpLeosPortXcvrTxFaultStatus | 0 | 0 | Indicates the fault status of this transceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.22 | wwpLeosPortXcvrRxRateStatus | 0 | 0 | Indicates the rx rate status of this transceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.23 | wwpLeosPortXcvr9by125um | 0 | 0 | Indicates the link length for 9/125um fiber. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.24 | wwpLeosPortXcvr50by125um | 0 | 0 | Indicates the link length for 50/125um fiber. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.25 | wwpLeosPortXcvr62dot5by125um | 0 | 0 | Indicates the link length for 62.5/125um fiber. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.26 | wwpLeosPortXcvrCu | 0 | 0 | Indicates the link length for copper. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.27 | wwpLeosPortXcvrTxOutputPw | 0 | 0 | Indicates the Tx Output power for the transceiver. Units are Watts. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.28 | wwpLeosPortXcvrLosState | 0 | 0 | Indicates the LOS State for the transceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.29 | wwpLeosPortXcvrDiagSupported | 0 | 0 | Indicates if diagnostics is supported on this transceiver. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.30 | wwpLeosPortXcvrEnhDiagAlarmSupported | 0 | 0 | Indicates if enhanced diagnostics alarms / warnings implemented. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.31 | wwpLeosPortXcvrEnhDiagSoftTxDisableSupported | 0 | 0 | Indicates if enhanced diagnostics soft tx disable control is implemented. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.32 | wwpLeosPortXcvrEnhDiagSoftTxFaultSupported | 0 | 0 | Indicates if enhanced diagnostics soft tx fault monitoring is implemented. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.33 | wwpLeosPortXcvrEnhDiagRxLosSupported | 0 | 0 | Indicates if enhanced diagnostics rx los monitoring is implemented. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.34 | wwpLeosPortXcvrHighTempAlarmThreshold | 0 | 0 | wwpLeosPortXcvrHightempAlarmThreshold |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.35 | wwpLeosPortXcvrLowTempAlarmThreshold | 0 | 0 | Indicates the lower threshold for temperature alarm. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.36 | wwpLeosPortXcvrHighVccAlarmThreshold | 0 | 0 | Indicates the higher threshold for voltage alarm. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.37 | wwpLeosPortXcvrLowVccAlarmThreshold | 0 | 0 | Indicates the lower threshold for voltage alarm. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.38 | wwpLeosPortXcvrHighBiasAlarmThreshold | 0 | 0 | Indicates the higher threshold for bias alarm. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.39 | wwpLeosPortXcvrLowBiasAlarmThreshold | 0 | 0 | Indicates the lower threshold for bias alarm. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.40 | wwpLeosPortXcvrHighTxPwAlarmThreshold | 0 | 0 | wwpLeosPortXcvrHightxPwAlarmThreshold |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.41 | wwpLeosPortXcvrLowTxPwAlarmThreshold | 0 | 0 | Indicates the lower threshold for tx power alarm. Units are watts. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.42 | wwpLeosPortXcvrHighRxPwAlarmThreshold | 0 | 0 | Indicates the higher threshold for rx power alarm. Units are watts. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.43 | wwpLeosPortXcvrLowRxPwAlarmThreshold | 0 | 0 | Indicates the lower threshold for rx power alarm. Units are watts. |
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.44 | wwpLeosPortXcvrEnhDiagRateSelectSupported | 0 | 0 | Indicates if enhanced diagnostics soft rate select control is implemented. |