An entry in the board table. There is one entry for each
board configured. The index corresponds to equipment type
'card' in the adnEquipTable.
Parsed from file hss1100adn.mib.txt
Company: None
Module: ADN-MIB
An entry in the board table. There is one entry for each
board configured. The index corresponds to equipment type
'card' in the adnEquipTable.
Parsed from file ADN-MIB.mib
Module: ADN-MIB
Vendor: Alcatel-Lucent (previously was 'Alcatel Data Network')
Module: ADN-MIB
[Automatically extracted from oidview.com]
adnBoardEntry OBJECT-TYPE SYNTAX AdnBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the board table. There is one entry for each board configured. The index corresponds to equipment type 'card' in the adnEquipTable." INDEX { adnEquipType, adnEquipIndex } ::= { adnBoardTable 1 }
adnBoardEntry OBJECT-TYPE SYNTAX AdnBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the board table. There is one entry for each board configured. The index corresponds to equipment type 'card' in the adnEquipTable." INDEX { adnEquipType, adnEquipIndex } ::= { adnBoardTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.637.3.1.5.15.2.1.3 | adnBoardAppliqueType | 0 | 0 | This indicates the configured applique type. |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.4 | adnBoardAppliqueState | 0 | 0 | This indicates the operational state of an applique which is either present or absent or wrong or inaccessible. The value inacces… |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.5 | adnBoardApplPluggedType | 0 | 0 | This indicates the type of applique that is plugged in. |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.6 | adnBoardPluggedType | 0 | 0 | This indicates the type of board that is plugged in. If no board is plugged in, this MIB object value should is set to the OBJECT… |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.7 | adnBoardRedundancyRole | 0 | 0 | This indicates the redundancy role of the card. A value of noRedundancy(1) is used for cards that do not support redundancy. Car… |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.8 | adnBoardRedundancyStatus | 0 | 0 | This indicates the redundancy status of the card. A card that does not support redundancy is considered a primary running for its… |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.9 | adnBoardRedundancyFailure | 0 | 0 | The value of this object is a bitmap that qualifies the switchover or the switchback failures. When the value of this object is 0… |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.10 | adnBoardRedundantBind | 0 | 0 | For a primary card, this variable indicates the adnEquipIndex of the spare card which backs up this primary card. For a spare card… |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.11 | adnBoardSwitchCause | 0 | 0 | The value of this object gives the reason why the switchover or the switchback has been initiated. This object qualifies the obje… |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.12 | adnBoardFaultStatus | 0 | 0 | For values 1 to 8 : this variable gives details on transitory failures of a CU (Control Unit) card. Other values : this variable gi… |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.13 | adnBoardServiceIndicator | 0 | 0 | An indication of the services supported by this board. Boards of the same physical type may have different values for this object… |
| 1.3.6.1.4.1.637.3.1.5.15.2.1.14 | adnBoardTestResult | 0 | 0 | The value of this object gives the hardware tests or rebuild result. For boards other than CU (Control Unit) boards, this object i… |