Extensions to the ospfNbrTable
Parsed from file ALCATEL-IND1-OSPF-MIB.mib
Module: ALCATEL-IND1-OSPF-MIB
alaOspfNbrAugTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaOspfNbrAugEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extensions to the ospfNbrTable" ::= { alaProtocolOspf 31 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.31.1 | alaOspfNbrAugEntry | 13 | 13 | Additions to neighbor table |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.1 | alaOspfRedistAdminStatus | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.2 | alaOspfRedistRouteTag | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.3 | alaOspfTimerSpfDelay | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.4 | alaOspfTimerSpfHold | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.7 | alaOspfRouteNumber | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.8 | alaOspfMTUCheck | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.9 | alaOspfAsBdrRtr | 1 | 1 | This node IS NOT DESCRIBED YET |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.10 | alaOspfRedistProtoTable | 1 | 7 | Protocol based configuration for route redistribution using OSPF. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.12 | alaOspfRouteTable | 1 | 12 | OSPF routing table which contains the network routes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.13 | alaOspfBdrRouterTable | 1 | 10 | OSPF routing table which contains the routes to border (ABR and ASBR) routers. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.14 | alaOspfRedistRouteTable | 1 | 9 | A configuration table which controls the routes to be redistributed by OSPF from other routing protocols. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.16 | alaOspfIfMd5Table | 1 | 10 | The OSPF Interface MD5 Table describes the MD5 key management for OSPF interfaces. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.17 | alaOspfIfAugTable | 1 | 16 | Expansion for ospfIfTable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.18 | alaOspfVirtIfAugTable | 1 | 3 | Expansion for ospfVirtIfTable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.19 | alaOspfRestartHelperSupport | 0 | 0 | The router's support for acting as an OSPF hitless restart helper. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.20 | alaOspfRestartHelperStrictLSAChecking | 0 | 0 | Indicates whether or not a changed LSA will result in termination of graceful restart by a helping router. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.21 | alaOspfRestartHelperStatus | 0 | 0 | Indicates whether this OSPF router is operating as a Helper to a restarting router. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.22 | alaOspfRFC1583Compatibility | 0 | 0 | Indicates metrics used to choose among multiple AS- external-LSAs. When RFC1583Compatibility is set to enabled, only cost will be… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.23 | alaOspfOpaqueLsaSupport | 0 | 0 | The router's support for Opaque LSA types. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.24 | alaOspfTrafficEngineeringSupport | 0 | 0 | The router's support for OSPF traffic engineering. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.25 | alaOspfReferenceBandwidth | 0 | 0 | Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.26 | alaOspfRestartSupport | 0 | 0 | The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unp… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.27 | alaOspfRestartInterval | 0 | 0 | Configured OSPF hitless restart timeout interval. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.28 | alaOspfRestartStatus | 0 | 0 | Current status of OSPF hitless restart. The status of hitless restart is unplannedRestart after a CMM takeover. Before CMM take… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.29 | alaOspfRestartAge | 0 | 0 | Remaining time in current OSPF hitless restart interval. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.30 | alaOspfRestartExitReason | 0 | 0 | Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.32 | alaOspfVirtNbrAugTable | 1 | 12 | Extensions to ospfVirtNbrTable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.33 | alaOspfRestartInitiate | 0 | 0 | Initiates a planned graceful restart, if set to plannedRestart. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.35 | alaOspfAreaAugTable | 1 | 16 | Extensions to ospfAreaTable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.36 | alaOspfExtLsdbAugTable | 1 | 8 | Extensions to ospfExtLsdbTable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.37 | alaOspfAreaInterfaceTable | 1 | 3 | This table holds the mapping between area ID and the interfaces attached to it |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.38 | alaOspfAreaAggregateAugTable | 1 | 2 | Extensions to ospfAreaAggregateTable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.39 | alaOspfDefaultOriginate | 0 | 0 | Indicates whether this ASBR router originates the default route into the OSPF normal area(s). If set to 'only', the default rou… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.40 | alaOspfDefaultOriginateMetricType | 0 | 0 | Type of metric to be used with the default route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.41 | alaOspfDefaultOriginateMetric | 0 | 0 | Default metric to be used for the default route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.42 | alaOspfBfdStatus | 0 | 0 | Enables or disables bfd for OSPF protocol |
| 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.43 | alaOspfBfdAllInterfaceStatus | 0 | 0 | Enables or disables bfd for all OSPF interfaces |