The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
vStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.
Parsed from file AlcatelIND1VlanSTP.mib.txt
Company: None
Module: ALCATEL-IND1-VLAN-STP-MIB
The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
vStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.
Parsed from file ALCATEL-IND1-VLAN-STP-MIB.mib
Module: ALCATEL-IND1-VLAN-STP-MIB
Vendor: Alcatel
Module: ALCATEL-IND1-VLAN-STP-MIB (AlcatelIND1VlanSTP.mib)
Type: TABULAR
Access: read-write
Syntax: Timeout
(
600..4000 )
Automatically extracted from www.mibdepot.com
vStpBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of vStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." DEFVAL { 2000 } ::= { vStpEntry 17 }
vStpBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of vStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." DEFVAL { 2000 } ::= { vStpEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.1 | vStpNumber | 0 | 0 | The Spanning Tree number identifying this instance. Valid range from 1 to 65535. |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.2 | vStpMode | 0 | 0 | The mode of the Spanning Tree Protocol implemented for this bridge. The multiple mode (IEEE 802.1s multiple spanning tree) is to… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.3 | vStpProtocolSpecification | 0 | 0 | The version of the Spanning Tree Protocol implemented for this instance. The IEEE 802.1d and 802.1w (fast spanning tree) impleme… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.4 | vStpPriority | 0 | 0 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID (vStpBridgeAddre… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.5 | vStpBridgeAddress | 0 | 0 | The bridge identifier of this spanning tree instance as determined by the Spanning Tree Protocol. |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.6 | vStpTimeSinceTopologyChange | 0 | 0 | The time (in hundredths of a second) since the last time a topology change was detected by this spanning tree instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.7 | vStpTopChanges | 0 | 0 | The total number of topology changes detected by this spanning tree instance since the management entity was last reset or initia… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.8 | vStpDesignatedRoot | 0 | 0 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this instance. T… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.9 | vStpRootCost | 0 | 0 | The cost of the path to the root as seen from this bridge for this spanning tree instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.10 | vStpRootPortNumber | 0 | 0 | The port ifindex of the port which offers the lowest cost path from this bridge to the root bridge for this spanning tree instan… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.11 | vStpNextBestRootCost | 0 | 0 | The cost of the path to the root through the next best root port as seen from this bridge for this spanning tree instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.12 | vStpNextBestRootPortNumber | 0 | 0 | The port ifindex of the next port which offers the lowestcost path from this bridge to the root bridge for this spanning tree in… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.13 | vStpMaxAge | 0 | 0 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.14 | vStpHelloTime | 0 | 0 | The amount of time between the transmission of Configuration bridge PDUs by this instance on any port when it is the root of the … |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.15 | vStpHoldTime | 0 | 0 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.16 | vStpForwardDelay | 0 | 0 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.18 | vStpBridgeHelloTime | 0 | 0 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.4.1.6486.800.1.2.1.12.1.1.1.1.1.19 | vStpBridgeForwardDelay | 0 | 0 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the… |