Committed Information Rate - bandwidth values in kilobits per second.
Parsed from file ALCATEL-IND1-QOS-MIB.mib
Module: ALCATEL-IND1-QOS-MIB
alaQoSActionCIR OBJECT-TYPE SYNTAX Integer32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "Committed Information Rate - bandwidth values in kilobits per second." DEFVAL { 0 } ::= { alaQoSActionEntry 69 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.1 | alaQoSActionName | 0 | 0 | Name of action |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.2 | alaQoSActionSource | 0 | 0 | What entity created the action. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.3 | alaQoSActionDisposition | 0 | 0 | Disposition of traffic using the action. Use to filter out unwanted traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.4 | alaQoSActionDropAlgorithm | 0 | 0 | Which drop algorithm should be used to discard traffic when oversubscribed. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.5 | alaQoSActionWredMaximumThreshold | 0 | 0 | Bandwidth at which WRED should discard most traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.6 | alaQoSActionWredMaximumThresholdStatus | 0 | 0 | Status field indicating whether WRED maximum threshold is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.7 | alaQoSActionWredMinimumThreshold | 0 | 0 | Bandwidth at which WRED should start to discard traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.8 | alaQoSActionWredMinimumThresholdStatus | 0 | 0 | Status field indicating whether WRED minimum threshold is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.9 | alaQoSActionWredMaximumProbability | 0 | 0 | Probabilty that traffic will be dropped at WRED maximum threshold. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.10 | alaQoSActionWredMaximumProbabilityStatus | 0 | 0 | Status field indicating whether WRED maximum probability is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.11 | alaQoSActionMinimumBandwidth | 0 | 0 | Minimum bandwidth (Kbits/sec) to guarantee for traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.12 | alaQoSActionMinimumBandwidthStatus | 0 | 0 | Status field indicating whether minimum bandwidth is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.13 | alaQoSActionMaximumBandwidth | 0 | 0 | Maximum bandwidth (Kbits/sec) allowed for traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.14 | alaQoSActionMaximumBandwidthStatus | 0 | 0 | Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.15 | alaQoSActionPeakBandwidth | 0 | 0 | Peak bandwidth (Kbits/sec) allowed for traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.16 | alaQoSActionPeakBandwidthStatus | 0 | 0 | Status field indicating whether peak bandwidth is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.17 | alaQoSActionPriority | 0 | 0 | Internal and queueing priority to use for traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.18 | alaQoSActionPriorityStatus | 0 | 0 | Status field indicating whether priority is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.19 | alaQoSActionShared | 0 | 0 | When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.20 | alaQoSActionJitter | 0 | 0 | Maximum jitter to allow for traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.21 | alaQoSActionJitterStatus | 0 | 0 | Status field indicating whether jitter is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.22 | alaQoSActionLatency | 0 | 0 | Maximum latency to allow for traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.23 | alaQoSActionLatencyStatus | 0 | 0 | Status field indicating whether latency is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.24 | alaQoSActionMaximumDepth | 0 | 0 | Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.25 | alaQoSActionMaximumDepthStatus | 0 | 0 | Status field indicating whether maximum depth is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.26 | alaQoSActionMaximumBuffers | 0 | 0 | Maxmimum buffers for queues for traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.27 | alaQoSActionMaximumBuffersStatus | 0 | 0 | Status field indicating whether maximum buffers is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.28 | alaQoSAction8021p | 0 | 0 | 802.1p value to stamp on traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.29 | alaQoSAction8021pStatus | 0 | 0 | Status field indicating whether 802.1p is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.30 | alaQoSActionTos | 0 | 0 | TOS value to stamp on traffic. (High 3 bits of TOS byte) |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.31 | alaQoSActionTosStatus | 0 | 0 | Status field indicating whether TOS is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.32 | alaQoSActionDscp | 0 | 0 | TOS value to stamp on traffic. (High 6 bits of TOS byte) |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.33 | alaQoSActionDscpStatus | 0 | 0 | Status field indicating whether DSCP is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.34 | alaQoSActionMapFrom | 0 | 0 | What field to use as key for mapping 802.1p/TOS/DSCP priorities |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.35 | alaQoSActionMapTo | 0 | 0 | What field to rewrite due to remapping 802.1p/TOS/DSCP priorities |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.36 | alaQoSActionMapGroup | 0 | 0 | Name of the map group to use when remapping 802.1p/TOS/DSCP priorities. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.37 | alaQoSActionMapGroupStatus | 0 | 0 | Status field indicating whether a map group is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.38 | alaQoSActionSourceRewriteIpAddr | 0 | 0 | Source IP address to rewrite on traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.39 | alaQoSActionSourceRewriteIpAddrStatus | 0 | 0 | Status field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.40 | alaQoSActionSourceRewriteIpMask | 0 | 0 | Source rewrite IP mask to determine how much of source IP to rewrite. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.41 | alaQoSActionSourceRewriteNetworkGroup | 0 | 0 | Name of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source netw… |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.42 | alaQoSActionSourceRewriteNetworkGroupStatus | 0 | 0 | Status field indicating whether source rewrite network group is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.43 | alaQoSActionDestinationRewriteIpAddr | 0 | 0 | Destination IP address to rewrite on traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.44 | alaQoSActionDestinationRewriteIpAddrStatus | 0 | 0 | Status field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.45 | alaQoSActionDestinationRewriteIpMask | 0 | 0 | Destination rewrite IP mask to determine how much of destination IP to rewrite. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.46 | alaQoSActionDestinationRewriteNetworkGroup | 0 | 0 | Name of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destin… |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.47 | alaQoSActionDestinationRewriteNetworkGroupStatus | 0 | 0 | Status field indicating whether destination rewrite network group is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.48 | alaQoSActionLoadBalanceGroup | 0 | 0 | Name of load balance group to use for traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.49 | alaQoSActionLoadBalanceGroupStatus | 0 | 0 | Status field indicating whether load balanace group is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.50 | alaQoSActionPermanentGatewayIpAddr | 0 | 0 | Next hop gateway to use for traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.51 | alaQoSActionPermanentGatewayIpAddrStatus | 0 | 0 | Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.52 | alaQoSActionAlternateGatewayIpAddr | 0 | 0 | Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.53 | alaQoSActionAlternateGatewayIpAddrStatus | 0 | 0 | Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.54 | alaQoSActionRowStatus | 0 | 0 | Used to create/delete actions according to the RowStatus convention |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.55 | alaQoSActionMinimumDepth | 0 | 0 | Minimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.56 | alaQoSActionMinimumDepthStatus | 0 | 0 | Status field indicating whether minimum depth is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.57 | alaQoSActionVPNAccess | 0 | 0 | How to encrypt traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.58 | alaQoSActionNocache | 0 | 0 | When enabled, don't make hardware entries for matching flows. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.59 | alaQoSActionPortdisable | 0 | 0 | When enabled, disable the physical source port of the traffic. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.60 | alaQoSActionRedirectSlot | 0 | 0 | Destination physical slot for redirected traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.61 | alaQoSActionRedirectSlotStatus | 0 | 0 | Status for alaQoSActionRedirectSlotStatus field |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.62 | alaQoSActionRedirectPort | 0 | 0 | Destination physical port for redirected traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.63 | alaQoSActionRedirectAgg | 0 | 0 | Destination linkagg for redirected traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.64 | alaQoSActionRedirectAggStatus | 0 | 0 | Status for alaQoSActionRedirectAggStatus field |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.65 | alaQoSActionMirrorSlot | 0 | 0 | Destination physical slot for mirrored traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.66 | alaQoSActionMirrorPort | 0 | 0 | Destination physical port for mirrored traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.67 | alaQoSActionMirrorMode | 0 | 0 | Mirroring mode |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.68 | alaQoSActionMirrorModeStatus | 0 | 0 | Status for alaQoSActionMirrorMode field |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.70 | alaQoSActionCIRStatus | 0 | 0 | Status field indicating whether CIR value is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.71 | alaQoSActionCBS | 0 | 0 | Committed Burst Size - bucket size in byte. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.72 | alaQoSActionCBSStatus | 0 | 0 | Status field indicating whether CBS value is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.73 | alaQoSActionPIR | 0 | 0 | Peak Information Rate - bandwidth values in kilobits per second. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.74 | alaQoSActionPIRStatus | 0 | 0 | Status field indicating whether PIR value is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.75 | alaQoSActionPBS | 0 | 0 | Peak Burst Size - bucket size in byte. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.76 | alaQoSActionPBSStatus | 0 | 0 | Status field indicating whether PBS value is specified(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.77 | alaQoSActionCounterColor | 0 | 0 | Specifies the color mode for the counters which will be used for sr/trTCM. |