Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled).
Parsed from file ALCATEL-IND1-QOS-MIB.mib
Module: ALCATEL-IND1-QOS-MIB
alaQoSAppliedConditionMcastIpv6AddrStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled)." DEFVAL { disabled } ::= { alaQoSAppliedConditionEntry 108 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.58 | alaQoSAppliedConditionDestinationIpPort | 0 | 0 | Destination IP port range start to use for traffic classification. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.59 | alaQoSAppliedConditionDestinationIpPortStatus | 0 | 0 | Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.60 | alaQoSAppliedConditionService | 0 | 0 | Name of service to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.61 | alaQoSAppliedConditionServiceStatus | 0 | 0 | Status field indicating whether the service needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.62 | alaQoSAppliedConditionServiceGroup | 0 | 0 | Name of service group to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.63 | alaQoSAppliedConditionServiceGroupStatus | 0 | 0 | Status field indicating whether the service group needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.64 | alaQoSAppliedConditionIcmpType | 0 | 0 | ICMP type to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.65 | alaQoSAppliedConditionIcmpTypeStatus | 0 | 0 | Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.66 | alaQoSAppliedConditionIcmpCode | 0 | 0 | ICMP code to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.67 | alaQoSAppliedConditionIcmpCodeStatus | 0 | 0 | Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.68 | alaQoSAppliedConditionDlci | 0 | 0 | DLCI to use to traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.69 | alaQoSAppliedConditionDlciStatus | 0 | 0 | Status field indicating whether the DLCI needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.70 | alaQoSAppliedConditionRowStatus | 0 | 0 | Used to create/delete conditions according to the RowStatus convention |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.71 | alaQoSAppliedConditionSourcePortEnd | 0 | 0 | Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. Wh… |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.72 | alaQoSAppliedConditionDestinationPortEnd | 0 | 0 | Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range… |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.73 | alaQoSAppliedConditionSourceIpPortEnd | 0 | 0 | Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. … |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.74 | alaQoSAppliedConditionDestinationIpPortEnd | 0 | 0 | Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicat… |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.75 | alaQoSAppliedConditionSourceTcpPort | 0 | 0 | Source TCP port range start to use for traffic classification. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.76 | alaQoSAppliedConditionSourceTcpPortStatus | 0 | 0 | Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.77 | alaQoSAppliedConditionSourceTcpPortEnd | 0 | 0 | Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range… |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.78 | alaQoSAppliedConditionDestinationTcpPort | 0 | 0 | Destination TCP port range start to use for traffic classification. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.79 | alaQoSAppliedConditionDestinationTcpPortStatus | 0 | 0 | Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.80 | alaQoSAppliedConditionDestinationTcpPortEnd | 0 | 0 | Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indic… |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.81 | alaQoSAppliedConditionSourceUdpPort | 0 | 0 | Source UDP port range start to use for traffic classification. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.82 | alaQoSAppliedConditionSourceUdpPortStatus | 0 | 0 | Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.83 | alaQoSAppliedConditionSourceUdpPortEnd | 0 | 0 | Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range… |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.84 | alaQoSAppliedConditionDestinationUdpPort | 0 | 0 | Destination UDP port range start to use for traffic classification. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.85 | alaQoSAppliedConditionDestinationUdpPortStatus | 0 | 0 | Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.86 | alaQoSAppliedConditionDestinationUdpPortEnd | 0 | 0 | Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indic… |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.87 | alaQoSAppliedConditionEthertype | 0 | 0 | Ethertype value to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.88 | alaQoSAppliedConditionEthertypeStatus | 0 | 0 | Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.89 | alaQoSAppliedConditionTcpFlags | 0 | 0 | Use any/all specifieid TCP flags for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.90 | alaQoSAppliedConditionTcpFlagsStatus | 0 | 0 | Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.91 | alaQoSAppliedConditionTcpFlagsVal | 0 | 0 | TCP flags values used for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.92 | alaQoSAppliedConditionTcpFlagsValStatus | 0 | 0 | Not used |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.93 | alaQoSAppliedConditionTcpFlagsMask | 0 | 0 | Mask of TCP flags bits used for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.94 | alaQoSAppliedConditionTcpFlagsMaskStatus | 0 | 0 | Not used |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.95 | alaQoSAppliedConditionTcpEstablished | 0 | 0 | Look for established TCP sessions in classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.96 | alaQoSAppliedConditionSourceIpv6Addr | 0 | 0 | Source IPv6 address to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.97 | alaQoSAppliedConditionSourceIpv6AddrStatus | 0 | 0 | Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.98 | alaQoSAppliedConditionSourceIpv6Mask | 0 | 0 | Source IPv6 mask to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.99 | alaQoSAppliedConditionDestinationIpv6Addr | 0 | 0 | Destination IPv6 address to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.100 | alaQoSAppliedConditionDestinationIpv6AddrStatus | 0 | 0 | Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.101 | alaQoSAppliedConditionDestinationIpv6Mask | 0 | 0 | Destination IPv6 mask to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.102 | alaQoSAppliedConditionIpv6Traffic | 0 | 0 | classify IPV6 traffic |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.103 | alaQoSAppliedConditionIpv6NH | 0 | 0 | NH value to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.104 | alaQoSAppliedConditionIpv6NHStatus | 0 | 0 | Status field indicating whether the NH value needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.105 | alaQoSAppliedConditionIpv6FlowLabel | 0 | 0 | FL value to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.106 | alaQoSAppliedConditionIpv6FlowLabelStatus | 0 | 0 | Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.107 | alaQoSAppliedConditionMcastIpv6Addr | 0 | 0 | Multicast IPv6 address to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.109 | alaQoSAppliedConditionMcastIpv6Mask | 0 | 0 | Multicast IPv6 mask to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.110 | alaQoSAppliedConditionDscpEnd | 0 | 0 | DSCP value to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.111 | alaQoSAppliedConditionInnerSourceVlan | 0 | 0 | Customer VLAN to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.112 | alaQoSAppliedConditionInnerSourceVlanStatus | 0 | 0 | Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.113 | alaQoSAppliedConditionInner8021p | 0 | 0 | Customer 802.1p to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.114 | alaQoSAppliedConditionInner8021pStatus | 0 | 0 | Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.115 | alaQoSAppliedConditionVrfName | 0 | 0 | Name of Vrf to match traffic in |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.116 | alaQoSAppliedConditionVrfNameStatus | 0 | 0 | Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled). |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.117 | alaQoSAppliedCondition8021pEnd | 0 | 0 | 802.1p range end value to use for traffic classification. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.118 | alaQoSAppliedConditionInner8021pEnd | 0 | 0 | Inner 802.1p range end value to use for traffic classification. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.119 | alaQoSAppliedConditionSourceVlanGroup | 0 | 0 | Source vlan group to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.120 | alaQoSAppliedConditionSourceVlanGroupStatus | 0 | 0 | Status field indicating whether to use for traffic classification (enabled) or not (disabled) for source vlan group. |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.121 | alaQoSAppliedConditionInnerSourceVlanGroup | 0 | 0 | Inner Source vlan group to use for traffic classification |
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.122 | alaQoSAppliedConditionInnerSourceVlanGroupStatus | 0 | 0 | Status field indicating whether to use for traffic classification (enabled) or not (disabled) for inner source vlan group. |
... |