This option is used to select the data compression for the
V.32 bis or V.34 operation when running asynchronously. When
enabled the system will increase the effective data throughput
to speeds as high as 57.6kbps, depending on data type. For
synchronous applications, the speed is limited to a maximum of
14.4 kbps for V.32 and 28.8 kbps for V.34.
Parsed from file Dsuiv.mib.txt
Company: cai
Module: ADTRAN-DSUIV-MIB
Vendor: Adtran
Module: ADTRAN-DSUIV-MIB
[Automatically extracted from oidview.com]
adDSUIVDBUCompress OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This option is used to select the data compression for the V.32 bis or V.34 operation when running asynchronously. When enabled the system will increase the effective data throughput to speeds as high as 57.6kbps, depending on data type. For synchronous applications, the speed is limited to a maximum of 14.4 kbps for V.32 and 28.8 kbps for V.34." ::= {adDSUIVCfgDBU 19}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.664.2.125.3.6.19.0 | adDSUIVDBUCompress | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.664.2.125.3.6.1 | adDSUIVDBUOption | 1 | 1 | This option specifies whether the unit automatically enters dial backup mode or waits for manual setup. |
1.3.6.1.4.1.664.2.125.3.6.2 | adDSUIVDBUStartLockout | 1 | 1 | This option selects the hour to begin disabling dial backup operation when daily or weekend lockout mode is active. |
1.3.6.1.4.1.664.2.125.3.6.3 | adDSUIVDBUEndLockout | 1 | 1 | This option selects the hour to end dial backup lockout when daily or weekend lockout mode is active. |
1.3.6.1.4.1.664.2.125.3.6.4 | adDSUIVDBUNumToDial | 1 | 1 | This option offers a selection of stored numbers for the unit to automatically dial. If the primary DSUIV line fails, and the DS… |
1.3.6.1.4.1.664.2.125.3.6.5 | adDSUIVDBUMode | 1 | 1 | This option specifies the dial backup operating mode for the unit as orginate or answer. One end must be set to originate and th… |
1.3.6.1.4.1.664.2.125.3.6.6 | adDSUIVDBUOOS | 1 | 1 | This option enables the unit to enter backup mode if an out-of-service condition is detected from the network. |
1.3.6.1.4.1.664.2.125.3.6.7 | adDSUIVDBUNoRx | 1 | 1 | This option enables the unit to enter backup mode when a loss of receive signal is detected from the network. |
1.3.6.1.4.1.664.2.125.3.6.8 | adDSUIVDBUNoSealCurr | 1 | 1 | This option enables the unit to enter backup mode when a loss of sealing current is detected from the network. |
1.3.6.1.4.1.664.2.125.3.6.9 | adDSUIVDBUOnPattern | 1 | 1 | This option enables the unit to enter backup mode when a pattern of all ones or zeros is received that exceeds the DBU Fail Timer… |
1.3.6.1.4.1.664.2.125.3.6.10 | adDSUIVAutoRestoreTimer | 1 | 1 | This option selects the amount of time that the DSUIV circuit must be active before the unit switches from backup to normal mode … |
1.3.6.1.4.1.664.2.125.3.6.11 | adDSUIVRedialCount | 1 | 1 | This option allows the selection of the number of times the unit will redial the Far End unit when attempting to go to backup and… |
1.3.6.1.4.1.664.2.125.3.6.12 | adDSUIVDBUFailTimeout | 1 | 1 | This option allows the selection of the amount of time that the dedicated circuit failure condition is active before attempting t… |
1.3.6.1.4.1.664.2.125.3.6.13 | adDSUIVDBURedialTimer | 1 | 1 | This option works in conjunction with the Redial Counter option. The Redial Timer specifies the amount of time between redial att… |
1.3.6.1.4.1.664.2.125.3.6.14 | adDSUIVDBUPassCheck | 1 | 1 | This option allows the unit to send and verify a dial backup passcode for an additional level of security. When enabled, the ori… |
1.3.6.1.4.1.664.2.125.3.6.15 | adDSUIVDBUPassCode | 1 | 1 | This option sets the dial backup passcode used to provide an additional level of security. A passcode of one to ten digit charact… |
1.3.6.1.4.1.664.2.125.3.6.16 | adDSUIVDBUISDNNet | 1 | 1 | This option is used to select the company to provide the switched Digital Service. When US Sprint is selected, an automatic Echo … |
1.3.6.1.4.1.664.2.125.3.6.17 | adDSUIVDBUMNPmode | 1 | 1 | This option selects the type of error control to be negotiated at the start of the V.32 bis or V.34 modem connection. |
1.3.6.1.4.1.664.2.125.3.6.18 | adDSUIVDBUFlowCtrl | 1 | 1 | This option selects the type of flow control used by the V.32 bis or V.34 modem. |
1.3.6.1.4.1.664.2.125.3.6.20 | adDSUIVWeekendLockout | 1 | 1 | This option enables or disables Weekend Lockout for Dial Backup operation. If enabled, no backup will occur from midnight Friday… |
1.3.6.1.4.1.664.2.125.3.6.21 | adDSUIVDailyLockout | 1 | 1 | This option enables or disables Daily Lockout for Dial Backup operation. If enabled, no backup will occur between Lockout Start … |
1.3.6.1.4.1.664.2.125.3.6.22 | adDSUIVAnswerAlways | 1 | 1 | This option enables or disables Answer Always for Dial Backup operation. If enabled, the answer unit answers any incoming call r… |
1.3.6.1.4.1.664.2.125.3.6.23 | adDSUIVDBUTransTimer | 0 | 0 | None |
1.3.6.1.4.1.664.2.125.3.6.24 | adDSUIVDBUMaxTimer | 0 | 0 | None |
1.3.6.1.4.1.664.2.125.3.6.25 | adDSUIVDBUCallBack | 0 | 0 | None |
1.3.6.1.4.1.664.2.125.3.6.26 | adDSUIVDBUCallerID | 0 | 0 | None |
1.3.6.1.4.1.664.2.125.3.6.27 | adDSUIVDBUISDNProt | 0 | 0 | None |