TSU ESP status history of alarms, errors and tests.
The adTSUESPstatusHistory is a bit map represented as a sum,
therefore, it can represent multiple failures (alarms) and
a LoopbackState simultaneously.
adTSU ESPNoAlarm should be set if and only if no flag is set in adTSUESPAlarmMask.
The bit positions are defined:
1 adTSUESPNoAlarm No Alarm Present
2 adTSUESPRcvYellow Rcv Yellow Alarm (aka: Far end LOF )
4 adTSUESPXmtYellow Xmt Yellow Alarm (aka: Near sending LOF)
8 adTSUESPRcvBlue Rcv Blue Alarm (aka: Far end sending AIS)
16 adTSUESPXmtBlue Xmt Blue Alarm (aka: Near end sending AIS)
32 adTSUESPRcvRed Rcv Red Alarm (aka: Near end LOF)
64 adTSUESPRcvLOS Rcv (Near end) Loss Of Signal
128 adTSUESPLocalLB Local LoopBack
256 adTSUESPRemoteLB Remote LoopBack
512 adTSUESPXmtPattern Xmt Pattern generation
1024 adTSUESPCodeViol Code Violation (eg: Bipolar Violation)
2048 adTSUESPRcvBPVS Rcv Bipolar Violations
4096 adTSUESPFrmBitErr Frame Bit Errors
8192 adTSUESPPhaseLock Phase Lock Loop Alarm
16384 adTSUESPDialBackup Dial Backup
0x3C7E adTSUESPAlarmMask Mask for any Alarm Condition
Parsed from file Tsuesp.mib.txt
Company: cai
Module: ADTRAN-TSUESP-MIB
Vendor: Adtran
Module: ADTRAN-TSUESP-MIB
[Automatically extracted from oidview.com]
adTSUESPstatusHistory OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "TSU ESP status history of alarms, errors and tests. The adTSUESPstatusHistory is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. adTSU ESPNoAlarm should be set if and only if no flag is set in adTSUESPAlarmMask. The bit positions are defined: 1 adTSUESPNoAlarm No Alarm Present 2 adTSUESPRcvYellow Rcv Yellow Alarm (aka: Far end LOF ) 4 adTSUESPXmtYellow Xmt Yellow Alarm (aka: Near sending LOF) 8 adTSUESPRcvBlue Rcv Blue Alarm (aka: Far end sending AIS) 16 adTSUESPXmtBlue Xmt Blue Alarm (aka: Near end sending AIS) 32 adTSUESPRcvRed Rcv Red Alarm (aka: Near end LOF) 64 adTSUESPRcvLOS Rcv (Near end) Loss Of Signal 128 adTSUESPLocalLB Local LoopBack 256 adTSUESPRemoteLB Remote LoopBack 512 adTSUESPXmtPattern Xmt Pattern generation 1024 adTSUESPCodeViol Code Violation (eg: Bipolar Violation) 2048 adTSUESPRcvBPVS Rcv Bipolar Violations 4096 adTSUESPFrmBitErr Frame Bit Errors 8192 adTSUESPPhaseLock Phase Lock Loop Alarm 16384 adTSUESPDialBackup Dial Backup 0x3C7E adTSUESPAlarmMask Mask for any Alarm Condition" ::= {adTSUESPStatus 2}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.2.127.1.2.0 | adTSUESPstatusHistory | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.2.127.1.1 | adTSUESPselfTest | 1 | 1 | adTSUESPselftest |
| 1.3.6.1.4.1.664.2.127.1.3 | adTSUESPclearHistory | 1 | 1 | A Set resets the status history alarms, errors and tests. |
| 1.3.6.1.4.1.664.2.127.1.4 | adTSUESPcurrentStatus | 1 | 1 | TSU ESP current status of alarms, errors and tests. The adTSUESPcurrentStatus is a bit map represented as a sum, therefore, … |
| 1.3.6.1.4.1.664.2.127.1.5 | adTSUESPdtePortData | 1 | 1 | TSU ESP DTE port txd, rxd, etc and phase lock values are returned in four bytes with the 1st byte = txd on/off (1/0), the 2nd by… |
| 1.3.6.1.4.1.664.2.127.1.6 | adTSUESPdtePortStatus | 1 | 1 | TSU ESP DTE port status rts, cts, dcd and dsr are returned in 4 bytes with the 1st byte = rts on/off (1/0), the 2nd byte cts, th… |
| 1.3.6.1.4.1.664.2.127.1.7 | adTSUESPUnitState | 1 | 1 | This status contains the current TSU ESP operational state. |
| 1.3.6.1.4.1.664.2.127.1.8 | adTSUESPDBUCard | 1 | 1 | The type ESP Dial Backup Card installed in the TSU ESP unit. |
| 1.3.6.1.4.1.664.2.127.1.9 | adTSUESPLanCard | 1 | 1 | The type ESP Lan Card installed in the TSU ESP unit. |
| 1.3.6.1.4.1.664.2.127.1.10 | adTSUESPLeds | 1 | 1 | This status value contains the on or off state of the TSU ESP unit's front panel indicators. Each LED is represented by a bit in … |
| 1.3.6.1.4.1.664.2.127.1.11 | adTSUESPDialStatus | 1 | 1 | This status variable indicates dialing status information. The status is a bit mapped sum, multiple bits can be active simultaneo… |
| 1.3.6.1.4.1.664.2.127.1.12 | adTSUESPCmdStatus | 1 | 1 | This status variable indicates the result of the last command executed. |