Vendor: Adtran
Module: ADTRAN-DSUDBS4W-MIB
[Automatically extracted from oidview.com]
adDSUDBS4WprovDte OBJECT IDENTIFIER ::= { adDSUDBS4Wprov 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.2.18.1.2.1 | adDSUDBS4WEcho | 1 | 1 | Enable or disable AT command echo function. |
| 1.3.6.1.4.1.664.2.18.1.2.2 | adDSUDBS4WResultCode | 1 | 1 | Enable or disable AT command response. |
| 1.3.6.1.4.1.664.2.18.1.2.3 | adDSUDBS4WCodeFormat | 1 | 1 | Change AT command response format to short or long. |
| 1.3.6.1.4.1.664.2.18.1.2.4 | adDSUDBS4WCDoption | 1 | 1 | Selects the DSU DB S4W CD option. |
| 1.3.6.1.4.1.664.2.18.1.2.5 | adDSUDBS4WTRoption | 1 | 1 | Selects TR option for the DSU DB S4W. |
| 1.3.6.1.4.1.664.2.18.1.2.6 | adDSUDBS4WFlowControl | 1 | 1 | Select flow control options for the DSU DBU. Note: this command only applies to V.32 DBU |
| 1.3.6.1.4.1.664.2.18.1.2.7 | adDSUDBS4WDataFormat | 1 | 1 | Selects either asynchronous or synchronous data mode for the DTE interface. |
| 1.3.6.1.4.1.664.2.18.1.2.8 | adDSUDBS4WCSoption | 1 | 1 | Selects CS options for DSU DB S4W. |
| 1.3.6.1.4.1.664.2.18.1.2.9 | adDSUDBS4WTransmitClock | 1 | 1 | Selects source of the clock used to transfer data from the DTE to the DSU DB S4W. |
| 1.3.6.1.4.1.664.2.18.1.2.10 | adDSUDBS4WDTERate | 1 | 1 | Selects the operating DTE speed for the DSU DB S4W. |
| 1.3.6.1.4.1.664.2.18.1.2.11 | adDSUDBS4WAntiStream | 1 | 1 | Selects the antistream timeout which is the maximum time the DSU S4W is permitted to transmit data from the DTE into the network. |
| 1.3.6.1.4.1.664.2.18.1.2.12 | adDSUDBS4WEiaCtrlALB | 1 | 1 | Enable or disable EIA controlled ALB. |
| 1.3.6.1.4.1.664.2.18.1.2.13 | adDSUDBS4WRTStoCTSdelay | 1 | 1 | Selects either long or short RS to CS delay when CS is controlled by RS. |
| 1.3.6.1.4.1.664.2.18.1.2.14 | adDSUDBS4WScramblerMode | 1 | 1 | Selects scrambler or data invert function for 56kbps with secondary channel or 64kbps with clear channel operation. |
| 1.3.6.1.4.1.664.2.18.1.2.15 | adDSUDBS4WEiaCtrlRLB | 1 | 1 | Enable or disable EIA controlled RLB. |
| 1.3.6.1.4.1.664.2.18.1.2.16 | adDSUDBS4WSecondaryRate | 1 | 1 | Selects operating speed for secondary channel if secondary channel option is selected in network configuration. |
| 1.3.6.1.4.1.664.2.18.1.2.17 | adDSUDBS4WConnectorType | 1 | 1 | Selects DTE connector type. |
| 1.3.6.1.4.1.664.2.18.1.2.18 | adDSUDBS4WDteCommand | 1 | 1 | Select DTE interface command mode options. |
| 1.3.6.1.4.1.664.2.18.1.2.19 | adDSUDBS4WAsyncWordLen | 1 | 1 | Selects asynchronous word length. |
| 1.3.6.1.4.1.664.2.18.1.2.20 | adDSUDBS4WCombinedSRopt, adDSUDBS4WCombinedSRoption | 1 | 1 | Select the operatig mode for the SR lead. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.2.18.1.1 | adDSUDBS4WprovNet | 3 | 6 | None |
| 1.3.6.1.4.1.664.2.18.1.3 | adDSUDBS4WprovTest | 6 | 12 | None |
| 1.3.6.1.4.1.664.2.18.1.4 | adDSUDBS4WprovDial | 24 | 48 | None |