controllerPatrolReadMode OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
disabled(3),
auto(4),
manual(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the patrol read mode setting for the controller.
Possible values:
1: Not one of the following.
2: Not Supported on this controller.
3: Disabled.
4: Automatic.
5: Manual.
"
View at oid-info.com
Identifies the patrol read mode setting for the controller.
Possible values:
1: Not one of the following.
2: Not Supported on this controller.
3: Disabled.
4: Automatic.
5: Manual.
Parsed from file IDRAC-MIB-SMIv2.mib
Module: IDRAC-MIB-SMIv2
controllerPatrolReadMode OBJECT-TYPE SYNTAX INTEGER { other(1), notSupported(2), disabled(3), auto(4), manual(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the patrol read mode setting for the controller. Possible values: 1: Not one of the following. 2: Not Supported on this controller. 3: Disabled. 4: Automatic. 5: Manual. " ::= { controllerTableEntry 52 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.1 | controllerNumber | 0 | 0 | Instance number of this controller entry. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.2 | controllerName | 0 | 0 | The controller's name as represented in Storage Management. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.7 | controllerRebuildRate | 0 | 0 | The rebuild rate is the percentage of the controllers resources dedicated to rebuilding a failed disk when a rebuild is necessar… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.8 | controllerFWVersion | 0 | 0 | The controller's current firmware version. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.9 | controllerCacheSizeInMB | 0 | 0 | The controller's current amount of cache memory in megabytes. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.37 | controllerRollUpStatus | 0 | 0 | Severity of the controller state. This is the combined status of the controller and its components. Possible values: 1: Other. 2: U… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.38 | controllerComponentStatus | 0 | 0 | The status of the controller itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.41 | controllerDriverVersion | 0 | 0 | Currently installed driver version for this controller on the host. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.42 | controllerPCISlot | 0 | 0 | The PCI slot on the server where the controller is seated. This data is not reported for embedded or integrated controllers, |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.48 | controllerReconstructRate | 0 | 0 | The reconstruct rate is the percentage of the controllers resources dedicated to reconstructing a disk group after adding a phy… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.49 | controllerPatrolReadRate | 0 | 0 | The patrol read rate is the percentage of the controllers resources dedicated to perform a patrol read on disks participating in… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.50 | controllerBGIRate | 0 | 0 | The background initialization (BGI) rate is the percentage of the controllers resources dedicated to performing the background i… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.51 | controllerCheckConsistencyRate | 0 | 0 | The check consistency rate is the percentage of the controllers resources dedicated to performing a check consistency on a redun… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.53 | controllerPatrolReadState | 0 | 0 | This property displays the current state of the patrol read process. Possible values: 1: Not one of the following. 1: Patrol read … |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.59 | controllerPersistentHotSpare | 0 | 0 | Indicates whether hot spare drives would be restored on insertion into the same slot. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.60 | controllerSpinDownUnconfiguredDrives | 0 | 0 | Indicates whether un-configured drives would be put in power save mode by the controller. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.61 | controllerSpinDownHotSpareDrives | 0 | 0 | Indicates whether hot spare drives would be put in power save mode by the controller. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.62 | controllerSpinDownTimeInterval | 0 | 0 | The duration in minutes after which, the unconfigured or hot spare drives will be spun down to power save mode. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.69 | controllerPreservedCache | 0 | 0 | Indicates whether preserved cache or pinned cache is present on the controller. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.70 | controllerCheckConsistencyMode | 0 | 0 | The current check consistency mode setting for the controller. Possible values: 1: Not one of the following. 2: Not supported on th… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.71 | controllerCopyBackMode | 0 | 0 | The current copy back mode setting for the controller. Possible values: 1: Not one of the following. 2: Not supported on this contr… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.72 | controllerSecurityStatus | 0 | 0 | The controller's current security/encryption status.. Possible values: 1: The current status could not be determined. 2: Controlle… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.73 | controllerEncryptionKeyPresent | 0 | 0 | Indicates whether encryption key is assigned for the controller. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.74 | controllerEncryptionCapability | 0 | 0 | The type of encryption supported by the controller. Possible values: 1: Not one of the following. 2: No encryption supported, 3: Lo… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.75 | controllerLoadBalanceSetting | 0 | 0 | The ability of the controller to automatically use both controller ports (or connectors) connected to the same enclosure in order… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.76 | controllerMaxCapSpeed | 0 | 0 | The maximum speed of the controller.in Gigbits per second (Gbps). Possible values: 1: The speed could not be determined. 2. 1.5Gbs 3… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.77 | controllerSASAddress | 0 | 0 | The SAS address of the controller. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.78 | controllerFQDD | 0 | 0 | The controller's Fully Qualified Device Descriptor (FQDD) as represented in Storage Management. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.79 | controllerDisplayName | 0 | 0 | The controller's friendly FQDD as represented in Storage Management. |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.80 | controllerT10PICapability | 0 | 0 | controllerT10PICapability OBJECT-TYPE SYNTAX INTEGER { other(1), capable(2), notCapable(3) } ACCESS read-only STATUS mandatory … |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.81 | controllerRAID10UnevenSpansSupported | 0 | 0 | controllerRAID10UnevenSpansSupported OBJECT-TYPE SYNTAX BooleanType ACCESS read-only STATUS mandatory DESCRIPTION "Indicates wh… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.82 | controllerEnhancedAutoImportForeignConfigMode | 0 | 0 | controllerEnhancedAutoImportForeignConfigMode OBJECT-TYPE SYNTAX INTEGER { other(1), notSupported(2), disabled(3), enabled(4) }… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.83 | controllerBootModeSupported | 0 | 0 | controllerBootModeSupported OBJECT-TYPE SYNTAX BooleanType ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether hea… |
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.84 | controllerBootMode | 0 | 0 | controllerBootMode OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), user(2), contOnError(3), headlessContOnError(4), headlessSafe… |