Device alternate Model as would be reported in a SCSI Inquiry command.
Parsed from file DELLPV136T-MIB.mib.txt
Company: dell
Module: DELLPV136T-MIB
Vendor: Dell
Module: DELLPV136T-MIB (DELLPV136T-MIB.mib)
Type: TABULAR
Access: read-only
Syntax: DisplayString
Automatically extracted from www.mibdepot.com
tapealtModel OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Device alternate Model as would be reported in a SCSI Inquiry command." ::= { tapeEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.674.10893.2.100.3.2.1.1 | tapeEntryId | 0 | 0 | Table entry index value. Each unique physical device has a unique tapeEntryId. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.2 | tapeState | 0 | 0 | Device SCSI State. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.3 | tapeTimeStamp | 0 | 0 | Universal time in sec since UTC 1/1/70 when the device data was last updated. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.4 | tapeType | 0 | 0 | SCSI device type. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.5 | tapeVendor | 0 | 0 | Device Vendor as would be reported in a SCSI Inquiry command. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.6 | tapeModel | 0 | 0 | Device Model as would be reported in a SCSI Inquiry command. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.7 | tapeFwlevel | 0 | 0 | Device firmware level as would be reported in a SCSI Inquiry command. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.8 | tapealtVendor | 0 | 0 | Device alternate Vendor as would be reported in a SCSI Inquiry command. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.10 | tapealtFwlevel | 0 | 0 | Device alternate firmware level as would be reported in a SCSI Inquiry command. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.11 | tapeSerNum | 0 | 0 | Device serial number as reported in SCSI Inquiry command, page 0x80. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.12 | tapeScsiId | 0 | 0 | SCSI ID of the device. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.13 | tapeScsiLun | 0 | 0 | SCSI Lun of the device. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.14 | tapeLibrarySN | 0 | 0 | Serial Number of the library that this drive is in as reported in SCSI Inquiry command, page 0x80, for the media mover device. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.15 | tapeTpHrs | 0 | 0 | Total tape motion hours of this device. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.16 | tapeClean | 0 | 0 | Cleaning State of the device. The interpretation of this value is vendor specific. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.17 | tapeLoads | 0 | 0 | Total cartridge loads for the drive. |
1.3.6.1.4.1.674.10893.2.100.3.2.1.18 | tapeSoftWrtErrors | 0 | 0 | Recovered soft write error count for current cartridge |
1.3.6.1.4.1.674.10893.2.100.3.2.1.19 | tapeHardWrtErrors | 0 | 0 | Hard write error count for current cartridge |
1.3.6.1.4.1.674.10893.2.100.3.2.1.20 | tapeSoftReadErrors | 0 | 0 | Recovered soft read error count for current cartridge |
1.3.6.1.4.1.674.10893.2.100.3.2.1.21 | tapeHardReadErrors | 0 | 0 | Hard read error count for current cartridge |